说明
· 此文档为基于官方修改的只针对Ubuntu 12.04，完整的参阅官方文档
· 本部署为开发环境，Swift配置为以root权限运行，生产环境推荐新建用户swift
· Ubuntu Server安装时不选其它组件，最小化安装
· 以下安装命令全部以root身份运行
Ubuntu 更新:
sudo apt-get update
sudo apt-get upgrade
安装依赖
apt-get update
apt-get install curl gcc memcached rsync sqlite3 xfsprogsgit python-setuptools
apt-get install python-coverage python-dev python-nosepython-simplejson python-xattr python-eventlet python-greenletpython-pastedeploy python-netifaces python-pip python-dnspython python-mock
使用回环设备作为存储，若需要使用一个分区作为存储，参见官方文档
mkdir /srv
truncate -s 1GB /srv/swift-disk
mkfs.xfs /srv/swift-disk
修改/etc/fstab添加如下行
/srv/swift-disk/mnt/sdb1 xfs loop,noatime,nodiratime,nobarrier,logbufs=8 0 0
mkdir /mnt/sdb1
mount /mnt/sdb1
mkdir /mnt/sdb1/1 /mnt/sdb1/2 /mnt/sdb1/3 /mnt/sdb1/4
chown root:root /mnt/sdb1/*
for x in {1..4}; do ln -s /mnt/sdb1/$x /srv/$x; done
mkdir -p /etc/swift/object-server/etc/swift/container-server /etc/swift/account-server
mkdir -p /srv/1/node/sdb1 /srv/2/node/sdb2/srv/3/node/sdb3 /srv/4/node/sdb4 /var/run/swift
chown -R root:root /etc/swift /srv/[1-4]/ /var/run/swift
编辑文件/etc/rc.local，在exit 0之前添加如下4行:
mkdir -p /var/cache/swift /var/cache/swift2/var/cache/swift3 /var/cache/swift4
chown root:root/var/cache/swift*
mkdir -p /var/run/swift
chown root:root /var/run/swift
设置Rsync
创建文件/etc/rsyncd.conf，：
uid = root
gid = root
log file = /var/log/rsyncd.log
pid file = /var/run/rsyncd.pid
address = 127.0.0.1
[account6012]
max connections = 25
path = /srv/1/node/
read only = false
lock file = /var/lock/account6012.lock
[account6022]
max connections = 25
path = /srv/2/node/
read only = false
lock file = /var/lock/account6022.lock
[account6032]
max connections = 25
path = /srv/3/node/
read only = false
lock file = /var/lock/account6032.lock
[account6042]
max connections = 25
path = /srv/4/node/
read only = false
lock file = /var/lock/account6042.lock
[container6011]
max connections = 25
path = /srv/1/node/
read only = false
lock file = /var/lock/container6011.lock
[container6021]
max connections = 25
path = /srv/2/node/
read only = false
lock file = /var/lock/container6021.lock
[container6031]
max connections = 25
path = /srv/3/node/
read only = false
lock file = /var/lock/container6031.lock
[container6041]
max connections = 25
path = /srv/4/node/
read only = false
lock file = /var/lock/container6041.lock
[object6010]
max connections = 25
path = /srv/1/node/
read only = false
lock file = /var/lock/object6010.lock
[object6020]
max connections = 25
path = /srv/2/node/
read only = false
lock file = /var/lock/object6020.lock
[object6030]
max connections = 25
path = /srv/3/node/
read only = false
lock file = /var/lock/object6030.lock
[object6040]
max connections = 25
path = /srv/4/node/
read only = false
lock file = /var/lock/object6040.lock
编辑文件/etc/default/rsync，设置参数RSYNC_ENABLE为true:
RSYNC_ENABLE=true
启动rsync服务
service rsync restart
确认rsync启动成功
rsync rsync://pub@localhost/
设置独立日志（非必需，略，见官方文档）
获取代码并设置测试环境
从git上获取swift代码，下载到本地
git clone https://github.com/openstack/swift.git
安装Swift的开发版本
cd ~/swift
git checkout -t origin/stable/grizzly # checkout稳定分支1.8
python setup.py develop(此处若遇到错误戳这里)
cd ..
从git上获取python-swiftclient代码，下载到本地
git clonehttps://github.com/openstack/python-swiftclient.git
安装python-swiftclient的开发版本
cd ~/python-swiftclient
python setup.py develop
cd ..
配置各结点
创建文件/etc/swift/proxy-server.conf，
[DEFAULT]
bind_port = 8080
user = root
log_facility = LOG_LOCAL1
eventlet_debug = true
[pipeline:main]
pipeline = healthcheck cache tempauth proxy-loggingproxy-server
[app:proxy-server]
use = egg:swift#proxy
allow_account_management = true
account_autocreate = true
[filter:tempauth]
use = egg:swift#tempauth
user_admin_admin = admin .admin .reseller_admin
user_test_tester = testing .admin
user_test2_tester2 = testing2 .admin
user_test_tester3 = testing3
[filter:healthcheck]
use = egg:swift#healthcheck
[filter:cache]
use = egg:swift#memcache
[filter:proxy-logging]
use = egg:swift#proxy_logging
创建文件/etc/swift/swift.conf，
[swift-hash]
# random unique strings that can never change (DO NOTLOSE)
swift_hash_path_prefix = rui
swift_hash_path_suffix = jie
Create/etc/swift/account-server/1.conf:
[DEFAULT]
devices = /srv/1/node
mount_check = false
disable_fallocate = true
bind_port = 6012
user = root
log_facility = LOG_LOCAL2
recon_cache_path = /var/cache/swift
eventlet_debug = true
[pipeline:main]
pipeline = recon account-server
[app:account-server]
use = egg:swift#account
[filter:recon]
use = egg:swift#recon
[account-replicator]
vm_test_mode = yes
[account-auditor]
[account-reaper]
Create/etc/swift/account-server/2.conf:
[DEFAULT]
devices = /srv/2/node
mount_check = false
disable_fallocate = true
bind_port = 6022
user = root
log_facility = LOG_LOCAL3
recon_cache_path = /var/cache/swift2
eventlet_debug = true
[pipeline:main]
pipeline = recon account-server
[app:account-server]
use = egg:swift#account
[filter:recon]
use = egg:swift#recon
[account-replicator]
vm_test_mode = yes
[account-auditor]
[account-reaper]
Create/etc/swift/account-server/3.conf:
[DEFAULT]
devices = /srv/3/node
mount_check = false
disable_fallocate = true
bind_port = 6032
user = root
log_facility = LOG_LOCAL4
recon_cache_path = /var/cache/swift3
eventlet_debug = true
[pipeline:main]
pipeline = recon account-server
[app:account-server]
use = egg:swift#account
[filter:recon]
use = egg:swift#recon
[account-replicator]
vm_test_mode = yes
[account-auditor]
[account-reaper]
Create/etc/swift/account-server/4.conf:
[DEFAULT]
devices = /srv/4/node
mount_check = false
disable_fallocate = true
bind_port = 6042
user = root
log_facility = LOG_LOCAL5
recon_cache_path = /var/cache/swift4
eventlet_debug = true
[pipeline:main]
pipeline = recon account-server
[app:account-server]
use = egg:swift#account
[filter:recon]
use = egg:swift#recon
[account-replicator]
vm_test_mode = yes
[account-auditor]
[account-reaper]
Create/etc/swift/container-server/1.conf:
[DEFAULT]
devices = /srv/1/node
mount_check = false
disable_fallocate = true
bind_port = 6011
user = root
log_facility = LOG_LOCAL2
recon_cache_path = /var/cache/swift
eventlet_debug = true
[pipeline:main]
pipeline = recon container-server
[app:container-server]
use = egg:swift#container
[filter:recon]
use = egg:swift#recon
[container-replicator]
vm_test_mode = yes
[container-updater]
[container-auditor]
[container-sync]
Create/etc/swift/container-server/2.conf:
[DEFAULT]
devices = /srv/2/node
mount_check = false
disable_fallocate = true
bind_port = 6021
user = root
log_facility = LOG_LOCAL3
recon_cache_path = /var/cache/swift2
eventlet_debug = true
[pipeline:main]
pipeline = recon container-server
[app:container-server]
use = egg:swift#container
[filter:recon]
use = egg:swift#recon
[container-replicator]
vm_test_mode = yes
[container-updater]
[container-auditor]
[container-sync]
Create/etc/swift/container-server/3.conf:
[DEFAULT]
devices = /srv/3/node
mount_check = false
disable_fallocate = true
bind_port = 6031
user = root
log_facility = LOG_LOCAL4
recon_cache_path = /var/cache/swift3
eventlet_debug = true
[pipeline:main]
pipeline = recon container-server
[app:container-server]
use = egg:swift#container
[filter:recon]
use = egg:swift#recon
[container-replicator]
vm_test_mode = yes
[container-updater]
[container-auditor]
[container-sync]
Create/etc/swift/container-server/4.conf:
[DEFAULT]
devices = /srv/4/node
mount_check = false
disable_fallocate = true
bind_port = 6041
user = root
log_facility = LOG_LOCAL5
recon_cache_path = /var/cache/swift4
eventlet_debug = true
[pipeline:main]
pipeline = recon container-server
[app:container-server]
use = egg:swift#container
[filter:recon]
use = egg:swift#recon
[container-replicator]
vm_test_mode = yes
[container-updater]
[container-auditor]
[container-sync]
Create /etc/swift/object-server/1.conf:
[DEFAULT]
devices = /srv/1/node
mount_check = false
disable_fallocate = true
bind_port = 6010
user = root
log_facility = LOG_LOCAL2
recon_cache_path = /var/cache/swift
eventlet_debug = true
[pipeline:main]
pipeline = recon object-server
[app:object-server]
use = egg:swift#object
[filter:recon]
use = egg:swift#recon
[object-replicator]
vm_test_mode = yes
[object-updater]
[object-auditor]
Create/etc/swift/object-server/2.conf:
[DEFAULT]
devices = /srv/2/node
mount_check = false
disable_fallocate = true
bind_port = 6020
user = root
log_facility = LOG_LOCAL3
recon_cache_path = /var/cache/swift2
eventlet_debug = true
[pipeline:main]
pipeline = recon object-server
[app:object-server]
use = egg:swift#object
[filter:recon]
use = egg:swift#recon
[object-replicator]
vm_test_mode = yes
[object-updater]
[object-auditor]
Create/etc/swift/object-server/3.conf:
[DEFAULT]
devices = /srv/3/node
mount_check = false
disable_fallocate = true
bind_port = 6030
user = root
log_facility = LOG_LOCAL4
recon_cache_path = /var/cache/swift3
eventlet_debug = true
[pipeline:main]
pipeline = recon object-server
[app:object-server]
use = egg:swift#object
[filter:recon]
use = egg:swift#recon
[object-replicator]
vm_test_mode = yes
[object-updater]
[object-auditor]
Create/etc/swift/object-server/4.conf:
[DEFAULT]
devices = /srv/4/node
mount_check = false
disable_fallocate = true
bind_port = 6040
user = root
log_facility = LOG_LOCAL5
recon_cache_path = /var/cache/swift4
eventlet_debug = true
[pipeline:main]
pipeline = recon object-server
[app:object-server]
use = egg:swift#object
[filter:recon]
use = egg:swift#recon
[object-replicator]
vm_test_mode = yes
[object-updater]
[object-auditor]
创建Swift运行脚本
mkdir /home/pz/bin
创建脚本/home/pz/bin/resetswift
因未创建rsyslog作为独立日志，已移除find /var/log/swift…这一行
如果使用的是单独分区存储需要将/srv/swift-disk替换为/dev/sdb1
#!/bin/bash
swift-init all stop
sudo umount /mnt/sdb1
sudo mkfs.xfs -f /srv/swift-disk
sudo mount /mnt/sdb1
sudo mkdir /mnt/sdb1/1 /mnt/sdb1/2 /mnt/sdb1/3 /mnt/sdb1/4
sudo chown root:root /mnt/sdb1/*
mkdir -p /srv/1/node/sdb1 /srv/2/node/sdb2/srv/3/node/sdb3 /srv/4/node/sdb4
sudo rm -f /var/log/debug /var/log/messages/var/log/rsyncd.log /var/log/syslog
find /var/cache/swift* -type f -name *.recon -exec rm -f{} \;
sudo service rsyslog restart
sudo service memcached restart
创建脚本/home/pz/bin/remakerings
#!/bin/bash
cd /etc/swift
rm -f *.builder *.ring.gz backups/*.builderbackups/*.ring.gz
swift-ring-builder object.builder create 10 3 1
swift-ring-builder object.builder addr1z1-127.0.0.1:6010/sdb1 1
swift-ring-builder object.builder addr1z2-127.0.0.1:6020/sdb2 1
swift-ring-builder object.builder addr1z3-127.0.0.1:6030/sdb3 1
swift-ring-builder object.builder addr1z4-127.0.0.1:6040/sdb4 1
swift-ring-builder object.builder rebalance
swift-ring-builder container.builder create 10 3 1
swift-ring-builder container.builder addr1z1-127.0.0.1:6011/sdb1 1
swift-ring-builder container.builder addr1z2-127.0.0.1:6021/sdb2 1
swift-ring-builder container.builder addr1z3-127.0.0.1:6031/sdb3 1
swift-ring-builder container.builder add r1z4-127.0.0.1:6041/sdb41
swift-ring-builder container.builder rebalance
swift-ring-builder account.builder create 10 3 1
swift-ring-builder account.builder addr1z1-127.0.0.1:6012/sdb1 1
swift-ring-builder account.builder addr1z2-127.0.0.1:6022/sdb2 1
swift-ring-builder account.builder addr1z3-127.0.0.1:6032/sdb3 1
swift-ring-builder account.builder addr1z4-127.0.0.1:6042/sdb4 1
swift-ring-builder account.builder rebalance
创建/home/pz/bin/startmain
#!/bin/bash
swift-init main start
创建/home/pz/bin/startrest
#!/bin/bash
swift-init rest start
chmod +x ~/bin/*
编辑~/.bashrc，在最后添加如下两行
export SWIFT_TEST_CONFIG_FILE=/etc/swift/test.conf
export PATH=${PATH}:~/bin
然后执行下列命令
. ~/.bashrc
remakerings
cp /home/pz/swift/test/sample.conf /etc/swift/test.conf
开启Swift
startmain
检查Swift工作
swift -A http://127.0.0.1:8080/auth/v1.0 -U test:tester-K testing stat
正确情况下，应该输出以下信息
Account: AUTH_test
Containers: 0
Objects: 0
Bytes: 0
Accept-Ranges: bytes
简单使用
1.获取一个 X-Storage-Url 和 X-Auth-Token。
#curl –v -H 'X-Storage-User:test:tester' -H 'X-Storage-Pass:testing' http://127.0.0.1:8080/auth/v1.0
可以得到以下返回信息：
* About to connect() to 127.0.0.1 port 8080 (#0)
* Trying 127.0.0.1... connected
* Connected to 127.0.0.1 (127.0.0.1) port 8080 (#0)
> GET /auth/v1.0 HTTP/1.1
> User-Agent: curl/7.19.7 (i486-pc-linux-gnu) libcurl/7.19.7 OpenSSL/0.9.8k zlib/1.2.3.3 libidn/1.15
> Host: 127.0.0.1:8080
> Accept: */*
> X-Storage-User: test:tester
> X-Storage-Pass: testing
< HTTP/1.1 200 OK
< X-Storage-Url: http://127.0.0.1:8080/v1/AUTH_test
< X-Storage-Token: AUTH_tk6474e5ee0cb04832b9d2a168e1a164d8
< X-Auth-Token: AUTH_tk6474e5ee0cb04832b9d2a168e1a164d8
< Content-Length: 0
< Date: Mon, 04 Jul 2011 01:36:57 GMT
* Connection #0 to host 127.0.0.1 left intact
*Closing connection #0
2. 检查账户。注意，X-Auth-Token:与<token-from-x-auth-token-above>之间存在一个空格，一定不能丢。
# curl -v -H 'X-Auth-Token: <token-from-x-auth-token-above>' <url-from-x-storage-url-above>
1. 检查Swift工作。
# swift -A http://127.0.0.1:8080/auth/v1.0 -U test:tester -K testing stat
正确情况下，应该输出以下信息：
Account: AUTH_test
Containers: 0
Objects: 0
Bytes: 0
Accept-Ranges: bytes
2. 创建container，创建一个名称为container_test的container（目录），注意使用当前的token。
# curl -X PUT -D - -H "X-Auth_Token:AUTH_tk6474e5ee0cb04832b9d2a168e1a164d8" http://127.0.0.1:8080/v1/AUTH_test/container_test
正确情况下，应该得到以下信息：
HTTP/1.1 201 Created
Content-Length: 0
Content-Type: text/html; charset=UTF-8
Date: Mon, 04 Jul 2011 01:39:38 GMT
3. 查看test用户的container列表，发现只有一个目录：container_test。
# swift -A http://127.0.0.1:8080/auth/v1.0 -U test:tester -K testing list
container_test
4. 上传Object（文件），上传hello文件到container_test目录中。
# swift -A http://127.0.0.1:8080/auth/v1.0 -U test:tester -K testing upload container_test /root/hello
root/hello
5. 查看目录中的内容，查看container_test目录中的内容。
# swift -A http://127.0.0.1:8080/auth/v1.0 -U test:tester -K testing list container_test
root/hello
6. 下载Object（文件）下载container_test下的object。
# swift -A http://127.0.0.1:8080/auth/v1.0 -U test:tester -K testing download container_test
将container_test目录内的所有内容下载到目前所在目录。注意：如果上传文件的时候，有嵌套目录，则上传到Swift上后，也是以嵌套目录的形式存在，下载后，会在当前目录创建一样的嵌套目录。
________________________________________
补充说明：
现在已经完成SAIO的部署了，下面介绍一下系统环境的改变：
1. ~/swift目录下存放Swift与python-swiftclient的源代码与执行脚本。
~/swift/bin目录下存放执行脚本。
~/swift/swift_1.7.6目录下存放Swift的源代码。
~/swift/python-swiftclient_1.2.0目录下存放Swift客户端的源代码。
2. /usr/local/lib/python2.7/dist-packages、/usr/share/pyshared、/usr/bin、/usr/local/bin等目录下存放Swift与python-swiftclient安装后的程序文件。
3. Swift的回环设备挂载在/mnt/sdb1目录上。
4. 回环设备对应的文件为/srv/swift-disk。
5. 四个存储节点对应的实际存储空间（即共享上述回环设备）——/mnt/sdb1/1、/mnt/sdb1/2、/mnt/sdb1/3、/mnt/sdb1/4。
6. 四个存储节点指向实际存储空间的软链接——/srv/1、/srv/2、/srv/3、/srv/4。
7. 四个存储节点的对应的虚拟挂载点——/srv/1/node/sdb1、/srv/2/node/sdb2、/srv/2/node/sdb2、/srv/2/node/sdb2。
8. Swift运行时所需目录/var/run/swift，用于存放各个服务进程的pid文件等内容。
9. Swift临时缓存的目录（姑且这么理解）——/var/cache/swift、/var/cache/swift2、/var/cache/swift3、/var/cache/swift4。
10. /etc/swift目录中存放Swift自身的配置文件。
/etc/swift/object-server目录中存放四个存储节点的Object Server配置文件。
/etc/swift/container-server目录中存放四个存储节点的Container Server配置文件。
/etc/swift/account-server目录中存放四个存储节点的Account Server配置文件。
/etc/swift/proxy-server.conf为Proxy Server的配置文件。
/etc/swift/swift.conf为Swift哈希后缀的配置文件。
backups目录、*.builder文件和*.ring.rz文件都是Ring的相关文件，其中*.ring.rz文件记录了生成的Ring。
test.conf文件是Swift单元测试所需的文件。
11. /var/log/swift目录下存放rsyslog独立日志工具输出的日志文件。
12. 其他被创建的文件：
/etc/rsyncd.conf，作为rsync数据镜像备份工具的配置文件。
/etc/rsyslog.d/10-swift.conf，作为rsyslog独立日志工具的配置文件。
13. 其他被修改的文件：
/etc/fstab，回环设备挂载相关配置文件。
/etc/rc.local，使得系统在启动时自动创建一些Swift所需的目录，这些目录可能在系统关闭后丢失。
/etc/default/rsync，使rsync能开机启动。
/etc/rsyslog.conf，改变rsyslog工具所在的Group。
~/.bashrc，使新增的环境变量生效。
参考：
http://docs.openstack.org/developer/swift/development_saio.html
4781
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
