如题,记录一下安装的主要难点。
- RST转换到AHCI(参考文章底下链接)
- 关闭安全启动
- 修改启动顺序
防止链接失效
- Right-click the Windows Start Menu. Choose Command Prompt (Admin).If you don’t see Command Prompt listed, it’s because you have already been updated to a later version of Windows. If so, use this method instead to get to the Command Prompt:
a. Click the Start Button and type cmd
b. Right-click the result and select Run as administrator - Type this command and press ENTER:
bcdedit /set {current} safeboot minimal
If this command does not work for you, try
bcdedit /set safeboot minimal
- Restart the computer and enter BIOS Setup (the key to press varies between systems).
- Change the SATA Operation mode to AHCI from either IDE or RAID (again, the language varies).
- Save changes and exit Setup and Windows will automatically boot to Safe Mode.
- Right-click the Windows Start Menu once more. Choose Command Prompt (Admin).
- Type this command and press ENTER:
bcdedit /deletevalue {current} safeboot
If you had to try the alternate command above, you will likely need to do so here also:
bcdedit /deletevalue safeboot
Reboot once more and Windows will automatically start with AHCI drivers enabled.