ubuntu下安装codeblocks

ubuntu下安装codeblocks

code::blocks在ubuntu下的安装。安装步骤：

1、安装必要组件

代码:

sudo apt-get install build-essential

代码:

sudo apt-get install gdb

2、更新源

代码:

gksudo gedit /etc/apt/sources.list

添加（以feisty为例）：

代码:

deb http://apt.tt-solutions.com/ubuntu/ feisty main

3、获取密钥

代码:

wget http://www.tt-solutions.com/vz/key.asc

代码:

sudo apt-key add key.asc

4、安装最新 wxWidgets 库

代码:

sudo apt-get update

代码:

sudo apt-get install libwxgtk2.8-0 libwxgtk2.8-dev wx2.8-headers wx-common

5、设置 wxWidgets 默认版本

代码:

sudo update-alternatives --config wx-config

从列表中选择一项即可。
6、下载 Code::Blocks 每夜构建版本
下载地址：http://forums.codeblocks.org/index.php/board,20.0.html
7、安装 Code::Blocks

代码:

sudo dpkg -i CB_20070608_rev4078_Ubuntu6.10+7.04_wx2.8.4.deb

其中，CB_20070608_rev4078_Ubuntu6.10+7.04_wx2.8.4.deb是2007年6月8日最新版本，以此类推。

在这里注意的是最后一步，若在安装最后一步时出错，那么将文件解压后一个文件一文件的安装。

参考 http://wiki.codeblocks.org/

Installing Code::Blocks nightly build on Ubuntu

From CodeBlocks

Jump to: navigation, search

This is a quick guide to get Code::Blocks up and running on your Ubuntu based Linux distribution. It is also going to make sure you can develop wxWidgets applications on your box as well. Look at the bottom of this guide for a complete command line that will install all the packages in one operation.

First be sure you have the necessary software to compile and debug programs.

1. Install the compiler.

sudo apt-get install build-essential

2. Install the debugger.

sudo apt-get install gdb

You'll need to install wxWidgets to use Codeblocks. Revisions prior to revision 4051 use wxWidgets 2.6 and revisions from 4051 and after use wxWidgets 2.8.4. If you want to install a revision prior to revision 4051, make sure you have your universe and multiverse repositories enabled and install the following packages.

3. Install wxWidgets library. (This package is all that is needed to run any application that uses wxWidgets. ie. Code::Blocks)

sudo apt-get install libwxgtk2.6-0

4. Install the wxWidgets developement packages. (This is used to develop wxWidgets applications of your own.)

sudo apt-get install libwxgtk2.6-dev wx2.6-headers wx-common

5. (OPTIONAL) Install the wxWidgets documentation.

sudo apt-get install wx2.6-doc

To install wxWidgets 2.8.4 you need to be using Ubuntu 6.10 (Edgy Eft) or Ubuntu 7.04 (Feisty Fawn) and you need to add the wxWidget repository to your sources.list. You can install wxWidgets 2.8.4 on Ubuntu 6.06 (Dapper Drake), but the nightly builds are not made to run on Dapper.

1. Backup your current sources.list first for precaution.

sudo cp /etc/apt/sources.list /etc/apt/sources.list.bak

2. Open your sources.list in a text editor to edit it.

gksudo gedit /etc/apt/sources.list

3. Add the correct repository for the Ubuntu version you are running to the end of the file. The repository listed below is referenced on the wxWidgets.org download page and appears to be for the stable version.

deb http://apt.tt-solutions.com/ubuntu/ edgy main

or

deb http://apt.tt-solutions.com/ubuntu/ feisty main

4. Save and close the file.

5. Add the key for tt-solutions.com.

wget http://www.tt-solutions.com/vz/key.asc sudo apt-key add key.asc

Alternate wxWidgets repository. Some users of Code::Blocks have received critical errors related to libwxgtk when using the above repository packages. They were able to solve their problems by installing newer packages available from an alternate repository from wxWidgets.org. To use these packages make the following changes to the above directions:

Add deb http://apt.wxwidgets.org/ edgy-wx main or deb http://apt.wxwidgets.org/ feisty-wx main to your sources.list.

Download the gpg key using wget http://apt.wxwidgets.org/key.asc and install the same as above.

6. Update your sources.list and run upgrade to make sure everything is up-to-date.

sudo apt-get update
sudo apt-get dist-upgrade

7. Now you're finally ready to install wxWidgets 2.8.4.

sudo apt-get install libwxgtk2.8-0 libwxgtk2.8-dev wx2.8-headers wx-common

8. Set wxWidgets 2.8 as default version for your machine. Select number for the wxgtk2.8 version.

sudo update-alternatives --config wx-config

Now go get the nightly build and install it. All dependencies should now be met.

1. Get the latest nigtly build of Code::Blocks from the nightly builds forum.

2. Install Code::Blocks.

sudo dpkg -i <Name_Of_Daily_Build.deb>

NOTE: Since revision 4281 and after, the nightly builds are made differently. Codeblocks is now packaged into separate Debian packages and the packages are archived together in a tar.gz file.

1. Download the tar.gz file to your computer and extract the files to an empty directory, such as one called temp for example.

tar xvf CB_date-of-build_revision-number_Ubuntu6.10+7.04_wx2.8.4.tar.gz

2. Install all the packages at the same time.

sudo dpkg -i *.deb

The packages can be installed individually, if you prefer not to install everything. The first package to install is libcodeblocks0 followed by the codeblocks package. All the other packages are optional. If you want to install the wxsmith and/or contrib packages, you must install the libwxsmithlib0 package first.

---

NOTE: Here is a complete command line for the above steps. Watch for word wrap. Replace wx2.6 with wx2.8 when needed.

sudo apt-get install build-essential gdb libwxgtk2.6-0 libwxgtk2.6-dev wx2.6-headers wx2.6-doc wx-common

Without optional steps:

sudo apt-get install build-essential gdb libwxgtk2.6-0 libwxgtk2.6-dev wx2.6-headers wx-common