/* * Initial Author: ryand1011 (https://github.com/ryand1011) * * Reads data written by a program such as "rfid_write_personal_data.ino" * * See: https://github.com/miguelbalboa/rfid/tree/master/examples/rfid_write_personal_data * * Uses MIFARE RFID card using RFID-RC522 reader * Uses MFRC522 - Library * ----------------------------------------------------------------------------------------- * MFRC522 Arduino Arduino Arduino Arduino Arduino * Reader/PCD Uno/101 Mega Nano v3 Leonardo/Micro Pro Micro * Signal Pin Pin Pin Pin Pin Pin * ----------------------------------------------------------------------------------------- * RST/Reset RST 9 5 D9 RESET/ICSP-5 RST * SPI SS SDA(SS) 10 53 D10 10 10 * SPI MOSI MOSI 11 / ICSP-4 51 D11 ICSP-4 16 * SPI MISO MISO 12 / ICSP-1 50 D12 ICSP-1 14 * SPI SCK SCK 13 / ICSP-3 52 D13 ICSP-3 15 */ #include <SPI.h> #include <MFRC522.h> #define RST_PIN 9 // #define SS_PIN 10 // MFRC522 mfrc522(SS_PIN, RST_PIN); // MFRC522实例创建 //*****************************************************************************************// void setup() { Serial.begin(115200); // Initialize serial communications with the PC SPI.begin(); // 初始化SPI总线 mfrc522.PCD_Init(); // init mfrc522卡 Serial.println(F("Read personal data on a MIFARE PICC:")); //显示在串口,它准备读 } //*****************************************************************************************// void loop() { // Prepare key - all keys are set to FFFFFFFFFFFFh at chip delivery from the factory.
//准备关键所有按键都设置在芯片ffffffffffff H从工厂交货。
MFRC522::MIFARE_Key key; for (byte i = 0; i < 6; i++) key.keyByte[i] = 0xFF; //some variables we need我们需要一些变量 byte block; byte len; MFRC522::StatusCode status; //------------------------------------------- // Look for new cards寻找新卡 if ( ! mfrc522.PICC_IsNewCardPresent()) { return; } // Select one of the cards选择其中一张牌 if ( ! mfrc522.PICC_ReadCardSerial()) { return; } Serial.println(F("**Card Detected:**")); //------------------------------------------- mfrc522.PICC_DumpDetailsToSerial(&(mfrc522.uid)); //dump some details about the card把一些关于卡的细节 //mfrc522.PICC_DumpToSerial(&(mfrc522.uid)); //uncomment this to see all blocks in hex注释掉这看到六块 //------------------------------------------- Serial.print(F("Name: ")); byte buffer1[18]; block = 4; len = 18; //------------------------------------------- GET FIRST NAME获得名 status = mfrc522.PCD_Authenticate(MFRC522::PICC_CMD_MF_AUTH_KEY_A, 4, &key, &(mfrc522.uid)); //line 834 of MFRC522.cpp file834号线mfrc522.cpp文件 if (status != MFRC522::STATUS_OK) { Serial.print(F("Authentication failed: ")); Serial.println(mfrc522.GetStatusCodeName(status)); return; } status = mfrc522.MIFARE_Read(block, buffer1, &len); if (status != MFRC522::STATUS_OK) { Serial.print(F("Reading failed: ")); Serial.println(mfrc522.GetStatusCodeName(status)); return; } //PRINT FIRST NAME打印的名字 for (uint8_t i = 0; i < 16; i++) { if (buffer1[i] != 32) { Serial.write(buffer1[i]); } } Serial.print(" "); //---------------------------------------- GET LAST NAME得姓 byte buffer2[18]; block = 1; status = mfrc522.PCD_Authenticate(MFRC522::PICC_CMD_MF_AUTH_KEY_A, 1, &key, &(mfrc522.uid)); //line 834 if (status != MFRC522::STATUS_OK) { Serial.print(F("Authentication failed: ")); Serial.println(mfrc522.GetStatusCodeName(status)); return; } status = mfrc522.MIFARE_Read(block, buffer2, &len); if (status != MFRC522::STATUS_OK) { Serial.print(F("Reading failed: ")); Serial.println(mfrc522.GetStatusCodeName(status)); return; } //PRINT LAST NAME for (uint8_t i = 0; i < 16; i++) { Serial.write(buffer2[i] ); } //---------------------------------------- Serial.println(F("\n**End Reading**\n")); delay(1000); //change value if you want to read cards faster如果你想读卡速度变化值 mfrc522.PICC_HaltA(); mfrc522.PCD_StopCrypto1(); } //*****************************************************************************************//