在http://www.uclinux.org/pub/uClinux/arm-elf-tools/ 下载arm-elf-tools-20030314.sh
在http://www.uclinux.org/pub/uClinux/dist/ 下载uClinux-dist-20041215.tar.gz
执行./arm-elf-tools-20030314.sh，安装工具链，执行tar zxvf uClinux-dist-20041215.tar.gz并进入uClinux-dist目录。
l 在linux-2.4.x/arch/armnommu/vmlinux-armv.lds.in文件中找到以下行:
*(got) /* Global Offset table */
在其之后添加如下语句：
romfs_data = .;
romfs.o
romfs_data_end = .;
注意，等号两边都要有空格。
l 在vendors/Samsung/4510B/Makefile 文件中添加image目标的第三行，增加一条语句：arm-elf-ld -r -o $(ROOTDIR)/$(LINUXDIR)/romfs.o -b binary $(ROMFSIMG)
如下为增加之后：
image:
[ -d $(IMAGEDIR) ] || mkdir -p $(IMAGEDIR)
genromfs -v -V "ROMdisk" -f $(ROMFSIMG) -d $(ROMFSDIR)
arm-elf-ld –r –o /root/uclinux/uClinux-dist/linux-2.4.x/romfs.o –b binary /root/uclinux/uClinux-dist/images/romfs.img
(/root/uclinux是我存放uClinux-dist的目录)
l 修改linux-2.4.x/drivers/char/serial_samsung.c, 找到uart_config数组,把如下项：
{ "S3C4510B", 1, 0}, /* Samsung S3C4510B uart support */
修改为：
{ "S3C4510B", 128, 0}, /* Samsung S3C4510B uart support */
l 执行make menuconfig
此处设置成S3C44B0X
l 修改config/.config，注释掉CONFIG_USER_OLD_PASSWORDS
l 执行make dep
l 执行make lib_only
l 执行make user_only
l 执行make romfs
l 修改linux-2.4.x/arch/armnommu/mach-S3C44B0X/arch.c
将23行的S3C44B0X改为S3C44B0
在代码末尾添加”}”
修改linux-2.4.x/arch/armnommu/kernel/head-armv.S
将206行以及439行的S3C44B0X改为S3C44B0
l 执行make
make成功后，uClinux-dist目录里将出现一个images目录。
在编译过程中并没有出现错误。
| 代码: |
*********************************************************************** **** **** **** SkyEye Simulator Ver 0.9.5 with GDB/Insight 5.3 Interface **** **** **** *********************************************************************** GNU gdb 5.3 Copyright 2002 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This SkyEye was configured as "--host=i686-pc-linux-gnu --target=arm-elf"... (SkyEye) target sim cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0 mach info: name at91, mach_init addr 0x8160154 nic[0] info: state=1, ethmod num=1, mac addr=0:5:3:2:1:f, hostip=192.168.0.99 nic_init_begin tapif_init begin tapif_init: fd 6 tapif_init: system("ifconfig tap0 inet 192.168.0.99"); tapif_init end nic_init_end SKYEYE: use arm7100 mmu ops Loaded ROM ./boot.rom Connected to the simulator. (SkyEye) load Loading section .init, size 0xa000 vma 0x1000000 Loading section .text, size 0xd72e8 vma 0x100a000 Loading section .data, size 0x9b30 vma 0x10e2000 Start address 0x1000000 Transfer rate: 7696576 bits in <1 sec. (SkyEye) r Starting program: /root/uClinux/Source/uclinux/uClinux-dist/linux-2.4.x/linux Linux version 2.4.24-uc0 (root@TEST) (gcc version 2.95.3 20010315 (release)) #11 Fri Jul 1 15:35:29 CST 2005 Processor: Atmel AT91M40xxx revision 0 Architecture: EB01 On node 0 totalpages: 1024 zone(0): 0 pages. zone(1): 1024 pages. zone(2): 0 pages. Kernel command line: root=/dev/rom0 Calibrating delay loop... 15.82 BogoMIPS Memory: 4MB = 4MB total Memory: 2952KB available (860K code, 185K data, 40K init) Dentry cache hash table entries: 512 (order: 0, 4096 bytes) Inode cache hash table entries: 512 (order: 0, 4096 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 1024 (order: 0, 4096 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Atmel USART driver version 0.99 ttyS0 at 0xfffd0000 (irq = 2) is a builtin Atmel APB USART ttyS1 at 0xfffcc000 (irq = 3) is a builtin Atmel APB USART Blkmem copyright 1998,1999 D. Jeff Dionne Blkmem copyright 1998 Kenneth Albanowski Blkmem 1 disk images: 0: 1400000-15103FF [VIRTUAL 1400000-15103FF] (RO) RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize pktgen.c: v1.3: Packet Generator for packet performance testing. pktgen: Error: your machine does not have working cycle counter. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 512 bind 512) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (romfs filesystem) readonly. BINFMT_FLAT: reloc outside program 0x74790000 (0 - 0x1bb5c/0x6d50), killing init! BINFMT_FLAT: reloc outside program 0x74790000 (0 - 0x1bb5c/0x6d50), killing init! BINFMT_FLAT: reloc outside program 0x74790000 (0 - 0x1bb5c/0x6d50), killing init! BINFMT_FLAT: reloc outside program 0x74790000 (0 - 0x1bb5c/0x6d50), killing init! BINFMT_FLAT: reloc outside program 0x84340100 (0 - 0x14248/0x10950), killing sh! BINFMT_FLAT: reloc outside program 0x84340100 (0 - 0x14248/0x10950), killing sh! Kernel panic: No init found. Try passing init= option to kernel. |
| 代码: |
#skyeye config file sample cpu: arm7tdmi mach: at91 mem_bank: map=M, type=RW, addr=0x00000000, size=0x00004000 mem_bank: map=M, type=RW, addr=0x01000000, size=0x00400000 mem_bank: map=M, type=R, addr=0x01400000, size=0x00400000, file=./boot.rom #romfs.img并没有超过这个size mem_bank: map=M, type=RW, addr=0x02000000, size=0x00400000 mem_bank: map=M, type=RW, addr=0x02400000, size=0x00008000 mem_bank: map=M, type=RW, addr=0x04000000, size=0x00400000 mem_bank: map=I, type=RW, addr=0xf0000000, size=0x10000000 #set nic info state=on/off mac=xx:xx:xx:xx:xx:xx ethmod=tuntap/vnet hostip=dd.dd.dd.dd net: state=on, mac=0:5:3:2:1:f, ethmod=tuntap, hostip=192.168.0.99 |
| 代码: |
http://www.uclinux.org/pub/uClinux/arm-tools/RPMS/ arm-elf-binutils-2.12.1-5.i386.rpm arm-elf-gcc-2.95.3-5.i386.rpm arm-elf-gdb-5.2-0.i386.rpm arm-elf-uClibc-0.9.20-2.i386.rpm |
操作系统是FC1 for x86
skyeye的版本是0.9.5
可能是tool-chain中的rpm包又问题
我换了一个tool-chain(arm-elf-tools-20030314.sh)可以正常运行了。。
4015
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
