zookeeper+kafka+storm集群搭建--详细步骤--附带官网连接

Zookeeper3.8.4搭建

tar xf apache-zookeeper-3.8.4-bin.tar.gz -C /usr/local/

mv apache-zookeeper-3.8.4-bin/ zookeeper

mv conf/zoo_sample.cfg conf/zoo.cfg

vim conf/zoo.cfg

# The number of milliseconds of each tick

tickTime=2000

# The number of ticks that the initial

# synchronization phase can take

initLimit=10

# The number of ticks that can pass between

# sending a request and getting an acknowledgement

syncLimit=5

# the directory where the snapshot is stored.

# do not use /tmp for storage, /tmp here is just

# example sakes.

dataDir=/usr/local/zookeeper/data

zookeeper.log.dir=/usr/local/zookeeper/logs

# the port at which the clients will connect

clientPort=2181

# the maximum number of client connections.

# increase this if you need to handle more clients

#maxClientCnxns=60

# Be sure to read the maintenance section of the

# administrator guide before turning on autopurge.

# https://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance

# The number of snapshots to retain in dataDir

#autopurge.snapRetainCount=3

# Purge task interval in hours

# Set to "0" to disable auto purge feature

#autopurge.purgeInterval=1

## Metrics Providers

# https://prometheus.io Metrics Exporter

#metricsProvider.className=org.apache.zookeeper.metrics.prometheus.PrometheusMetricsProvider

#metricsProvider.httpHost=0.0.0.0

#metricsProvider.httpPort=7000

#metricsProvider.exportJvmInfo=true

server.1=10.3.66.230:2888:3888

server.2=10.3.66.238:2888:3888

server.3=10.3.67.6:2888:3888

mkdir data

mkdir logs

echo 1 >> data/myid

scp -r /usr/local/zookeeper rtm5:/usr/local/

scp -r /usr/local/zookeeper rtm6:/usr/local/

切换到rtm5，

cd /usr/local/zookeeper

echo 2 > data/myid

同理rtm6

启停命令

./bin/zkServer.sh start/stop/status

storm集群搭建

tar xf apache-storm-2.4.0.tar.gz

mv apache-storm-2.4.0 /usr/local/storm

cd /usr/local/storm/

mkdir data

vim conf/storm.yaml

storm.zookeeper.servers:

- "kfk1"

- "kfk2"

- "kfk3"

nimbus.seeds: ["ncos", "rtm5", "rtm6"]

storm.local.dir: "/usr/local/storm/data"

supervisor.slots.ports:

- 6700

- 6701

- 6702

- 6703

其他两台机器同理

启动命令

cd bin/

使用storm的后台启动命令启动nimbus节点：

nohup storm nimbus &

使用storm的后台启动命令启动supervisor节点：

nohup storm supervisor &

使用storm的后台启动命令启动ui界面：

nohup storm ui &

使用storm的后台启动命令启动logviewer日志查看器：

nohup storm logviewer &

其他两台机器不用启动ui其他一致

kafka集群搭建

tar -xf kafka_2.13-3.6.0.tgz -C /usr/local/

mv kafka_2.13-3.6.0/ kafka

cd kafka

mkdir logs

vim config/server/properties

# Licensed to the Apache Software Foundation (ASF) under one or more

# contributor license agreements. See the NOTICE file distributed with

# this work for additional information regarding copyright ownership.

# The ASF licenses this file to You under the Apache License, Version 2.0

# (the "License"); you may not use this file except in compliance with

# the License. You may obtain a copy of the License at

# http://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software

# distributed under the License is distributed on an "AS IS" BASIS,

# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

# See the License for the specific language governing permissions and

# limitations under the License.

# This configuration file is intended for use in ZK-based mode, where Apache ZooKeeper is required.

# See kafka.server.KafkaConfig for additional details and defaults

############################# Server Basics #############################

# The id of the broker. This must be set to a unique integer for each broker.

broker.id=0

############################# Socket Server Settings #############################

# The address the socket server listens on. If not configured, the host name will be equal to the value of

# java.net.InetAddress.getCanonicalHostName(), with PLAINTEXT listener name, and port 9092.

# FORMAT:

# listeners = listener_name://host_name:port

# EXAMPLE:

# listeners = PLAINTEXT://your.host.name:9092

listeners=PLAINTEXT://10.3.66.237:9092

# Listener name, hostname and port the broker will advertise to clients.

# If not set, it uses the value for "listeners".

#advertised.listeners=PLAINTEXT://10.3.66.237:9092

# Maps listener names to security protocols, the default is for them to be the same. See the config documentation for more details

#listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL

# The number of threads that the server uses for receiving requests from the network and sending responses to the network

num.network.threads=3

# The number of threads that the server uses for processing requests, which may include disk I/O

num.io.threads=8

# The send buffer (SO_SNDBUF) used by the socket server

socket.send.buffer.bytes=102400

# The receive buffer (SO_RCVBUF) used by the socket server

socket.receive.buffer.bytes=102400

# The maximum size of a request that the socket server will accept (protection against OOM)

socket.request.max.bytes=104857600

############################# Log Basics #############################

# A comma separated list of directories under which to store log files

log.dirs=/usr/local/kafka/logs

# The default number of log partitions per topic. More partitions allow greater

# parallelism for consumption, but this will also result in more files across

# the brokers.

num.partitions=2

# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.

# This value is recommended to be increased for installations with data dirs located in RAID array.

num.recovery.threads.per.data.dir=1

############################# Internal Topic Settings #############################

# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state"

# For anything other than development testing, a value greater than 1 is recommended to ensure availability such as 3.

offsets.topic.replication.factor=1

transaction.state.log.replication.factor=1

transaction.state.log.min.isr=1

############################# Log Flush Policy #############################

# Messages are immediately written to the filesystem but by default we only fsync() to sync

# the OS cache lazily. The following configurations control the flush of data to disk.

# There are a few important trade-offs here:

# 1. Durability: Unflushed data may be lost if you are not using replication.

# 2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.

# 3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to excessive seeks.

# The settings below allow one to configure the flush policy to flush data after a period of time or

# every N messages (or both). This can be done globally and overridden on a per-topic basis.

# The number of messages to accept before forcing a flush of data to disk

#log.flush.interval.messages=10000

# The maximum amount of time a message can sit in a log before we force a flush

#log.flush.interval.ms=1000

############################# Log Retention Policy #############################

# The following configurations control the disposal of log segments. The policy can

# be set to delete segments after a period of time, or after a given size has accumulated.

# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens

# from the end of the log.

# The minimum age of a log file to be eligible for deletion due to age

log.retention.hours=168

# A size-based retention policy for logs. Segments are pruned from the log unless the remaining

# segments drop below log.retention.bytes. Functions independently of log.retention.hours.

#log.retention.bytes=1073741824

# The maximum size of a log segment file. When this size is reached a new log segment will be created.

#log.segment.bytes=1073741824

# The interval at which log segments are checked to see if they can be deleted according

# to the retention policies

log.retention.check.interval.ms=300000

############################# Zookeeper #############################

# Zookeeper connection string (see zookeeper docs for details).

# This is a comma separated host:port pairs, each corresponding to a zk

# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".

# You can also append an optional chroot string to the urls to specify the

# root directory for all kafka znodes.

zookeeper.connect=10.3.66.237:2181,10.3.66.236:2181,10.3.66.234:2181

# Timeout in ms for connecting to zookeeper

zookeeper.connection.timeout.ms=60000

############################# Group Coordinator Settings #############################

# The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial consumer rebalance.

# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to a maximum of max.poll.interval.ms.

# The default value for this is 3 seconds.

# We override this to 0 here as it makes for a better out-of-the-box experience for development and testing.

# However, in production environments the default value of 3 seconds is more suitable as this will help to avoid unnecessary, and potentially expensive, rebalances during application startu

group.initial.rebalance.delay.ms=0

kafka启动命令

./bin/kafka-server-start.sh -daemon config/server,properties

./bin/kafka-server-stop.sh