Necessary Knowledge of Cone Crusher Operation

We all know that the mining crusher refers to the crushing machinery whose content is   more than 50% of the total content, the row compound particle size is greater than three millimeters. It is invented by British Hengan. according to the feeding and nesting size, the crushing operations are often divided into coarse crushing, medium crushing and crushing. The commonly used equipments are compound crusher, single stage hammer breaker, vertical crusher, gyratory crusher, roll crusher machines, double roll crusher, combo crusher, and so on.
 
When the operators  operate the  the crusher, they must contain  certain important skills, only in this way, can they  ensure maximum machine production, and also to be able to ensure that the machine will not wear out quickly. So what exactly is the cone crusher operation knowledge the operator should  master ? Now let us look together :
1. Before starting the cone crusher ,we must check whether crushing chamber for raw materials on the inside, if the raw materials, will burn out the motor start overload. Lead to burn out the motor there to feed on the allocation of disk material uneven. This is because when the feed too much, because it exceeds the load of the crusher will burn out the motor.
2. When feeding the cone crusher , we need to pay attention to the specifications of the raw materials can not exceed the standard requirements, generally speaking, the experience will not exceed 80 percent of the required standard. This is because if the material specification is too large, it will occupy the the crushing cavity space, result in a slowdown of the machine operation and affect the production yield. Also makes the raw card to damage the internal parts in the crushing chamber.
3. the experienced cone crusher operator will stop feeding before stopping the cone crusher . This is because the stop crusher, when the machine is running slow, the added material and did not decrease, this will cause damage to the inside of the machine parts. Another to stop Crusher, be sure to clean up the remaining clean crushing chamber of a small amount of raw materials, these raw materials in it, the next time you turn it will damage the machine.

Crusher operator must maintenance machine regularly , only in this way,  the machine will always  work at its best condition , the production amount can be higher. Cone crusher, but also pay special attention to the machine's hydraulic system, check for leakage and other phenomena.

original link: http://778125535yaling.blog.com/
 

Sand washer : http://www.best-crushers.com/sandwasher.htm
Ball mills : http://www.best-crushers.com/ballmill.htm

转载于:https://www.cnblogs.com/dvbcxb/archive/2012/09/26/2703981.html