Matters Need to Note When the Concentrator Works

Composition and features of the beneficiation equipment concentrator (concentrator) :

The concentrator  is generally composed of concentrated pool, Crust frame , gear devices, Crust frame  lifting device  , the feeding device, discharge device and signal safety devices.

The main features of high efficiency concentrator (High Efficiency Concentrator) is to add a certain amount of flocculant in the concentrated slurry ,make the mineral particles in the slurry to form floc ,accelerate its settling velocity, and thus achieve the purpose of improving concentration efficiency .
 Applications range of the mineral processing equipment efficient enrichment machine    :
Efficient concentrator mineral processing equipment(a kind of ore beneficiation) is widely used in metallurgy, mining, coal, chemicals, building materials, environmental protection and the other departments for the process of slime, waste water, waste residue, which can improve wastewater utilization, Base flow transport concentration , and protect environment. 

Matters need to note when the beneficiation equipment concentrator (concentrator) works :
I . Things must be done before starting the concentrator  (1) clear out the debris on the top and around , check whether the rack raceway have obstacles or not . Transmission parts and the lubrication parts must be in good condition, forbid sick functioning. (2) Inspect whether the unit mining pipe or tank, the overflow outlet is smooth, the rake is good  or not ,  the underflow gates should works smoothly , closed tight(spare gate should be equipped) ,the coaming should be without defect.  (3) check whether the plastic pump  screws are loose or not, and the  V-belt tightness. (4) Check  the trommel situation of  screening particles. after confirming these above four-points, we can start the machine.

II. Things need to be done when the concentrators works  (1) Close the underflow gates, empty load car, and then feed the ore. (2) The machine is not allowed to fall into the debris, Bottom exile ore gate  must be work flexible, and a spare gate must be equipped. (3) Check  the operation situations of   concentrator center, transmission ministries glue pump . The packing mine leakage must be  timely processed, the lubricating parts need to be lubricated timely. (4)   maintain the safety device, the signal is in good condition.

III . Things need to be done when the concentrators stop working (1) before stopping the machine, the tailings must be finished,  minimize the load , closed the ore discharging gate. (2) clean-up the debris in the feeder channel,do the equipment sanitation,     hang warning signs , improve  civilization production   .
 

Cement machinery : http://www.china-crusher.com/48.htm
hammer crusher : http://www.best-crushers.com/hammer-mill.html
 

Stone crushing plant : http://www.crusher-export.com/rock-line.html
Rotary kiln : http://www.best-crushers.com/rotarykiln.htm

转载于:https://www.cnblogs.com/dvbcxb/archive/2012/09/05/2671961.html