某个功能被编译到so文件中,那么如何通过php来调用它?一个方法是写一个php模块(php extension),在php中调用该模块内的函数,再通过该模块来调用so中的函数。下面做一个简单的例子,使用的操作系统是Fedora Core 6。
* hello.c
* To compile, use following commands:
* gcc - O - c - fPIC - o hello.o hello.c
* gcc - shared - o libhello.so hello.o
*/
int hello_add( int a, int b)
{
return a + b;
}
然后将它编译成.so文件并放到系统中:
$ gcc - O - c - fPIC - o hello.o hello.c
$ gcc - shared - o libhello.so hello.o
$ su
# echo / usr / local / lib > / etc / ld.so.conf.d / local .conf
# cp libhello.so / usr / local / lib
# / sbin / ldconfig写段小程序来验证其正确性:
/**
* hellotest.c
* To compile, use following commands:
* gcc - o hellotest - lhello hellotest.c
*/
#include < stdio.h >
int main()
{
int a = 3 , b = 4 ;
printf( " %d + %d = %d\n " , a, b, hello_add(a,b));
return 0 ;
}
$ . / hellotest
3 + 4 = 7OK,
$ cd php - 5.2 . 9 / ext然后通过下面的命令建立一个名为 test 的模块。
$ . / ext_skel -- extname = test
PHP_FUNCTION(confirm_hello_compiled); /* For testing, remove later. */
PHP_FUNCTION(test_add);打开 hello.c,在 PHP_FE(confirm_test_compiled, NULL ) 下方加入以下内容。
zend_function_entry test_functions[] = {
PHP_FE(confirm_test_compiled, NULL ) /* For testing, remove later. */
PHP_FE(test_add, NULL ) /* For testing, remove later. */
{ NULL , NULL , NULL } /* Must be the last line in test_functions[] */
};
{
long int a, b;
long int result;
if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, " ll " , & a, & b) == FAILURE) {
return;
}
result = test_add(a, b);
RETURN_LONG(result);
}
# cp modules / test.so / usr / lib / php / modules然后在 / www / web / 下建立一个 test.php 文件,内容如下:
< ?php
dl( " test.so " );
echo test_add( 1 , 2 );
? >
首先做一个简单的so文件:
/*** hello.c
* To compile, use following commands:
* gcc - O - c - fPIC - o hello.o hello.c
* gcc - shared - o libhello.so hello.o
*/
int hello_add( int a, int b)
{
return a + b;
}
然后将它编译成.so文件并放到系统中:
$ gcc - O - c - fPIC - o hello.o hello.c
$ gcc - shared - o libhello.so hello.o
$ su
# echo / usr / local / lib > / etc / ld.so.conf.d / local .conf
# cp libhello.so / usr / local / lib
# / sbin / ldconfig写段小程序来验证其正确性:
/**
* hellotest.c
* To compile, use following commands:
* gcc - o hellotest - lhello hellotest.c
*/
#include < stdio.h >
int main()
{
int a = 3 , b = 4 ;
printf( " %d + %d = %d\n " , a, b, hello_add(a,b));
return 0 ;
}
编译并执行:
$ gcc - o hellotest - lhello hellotest.c$ . / hellotest
3 + 4 = 7OK,
下面我们来制作PHP模块。首先确保你安装了 php-devel 包,没有的话请自行从安装光盘上找。然后下载php源代码。我使用的是php-5.2.9.tar.gz,解压缩。
$ tar xzvf php - 5.2 . 9 .tar.gz$ cd php - 5.2 . 9 / ext然后通过下面的命令建立一个名为 test 的模块。
$ . / ext_skel -- extname = test
执行该命令之后它会提示你应当用什么命令来编译模块,可惜那是将模块集成到php内部的编译方法。如果要编译成可动态加载的 php_test.so,方法要更为简单。
$ cd test首先编辑 config.m4 文件,去掉第16行和第18行的注释(注释符号为 dnl 。)
16: PHP_ARG_ENABLE(test, whether to enable test support,
17: dnl Make sure that the comment is aligned:
18: [ --enable-test Enable test support])然后执行 phpize ()程序,生成configure脚本:
$ phpize然后打开 php_test.h,在 PHP_FUNCTION(confirm_test_compiled); 之下加入函数声明:
PHP_FUNCTION(confirm_hello_compiled); /* For testing, remove later. */
PHP_FUNCTION(test_add);打开 hello.c,在 PHP_FE(confirm_test_compiled, NULL ) 下方加入以下内容。
zend_function_entry test_functions[] = {
PHP_FE(confirm_test_compiled, NULL ) /* For testing, remove later. */
PHP_FE(test_add, NULL ) /* For testing, remove later. */
{ NULL , NULL , NULL } /* Must be the last line in test_functions[] */
};
然后在 test.c 的最末尾书写test_add函数的内容:
PHP_FUNCTION(test_add){
long int a, b;
long int result;
if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, " ll " , & a, & b) == FAILURE) {
return;
}
result = test_add(a, b);
RETURN_LONG(result);
}
保存退出,编译并安装:
$ . / configure -- enable - jinzhesheng_module -- with - apxs =/ usr / local / apache / bin / apxs -- with - php - config =/ usr / local / php / bin / php - config$ make# cp modules / test.so / usr / lib / php / modules然后在 / www / web / 下建立一个 test.php 文件,内容如下:
< ?php
dl( " test.so " );
echo test_add( 1 , 2 );
? >
然后在浏览器中打开test.php文件,如果显示3,则说明函数调用成功了。