nmcli 静态方式添加IP地址

[root@ansible02:/root]
> ip a 
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:90:8b:c4 brd ff:ff:ff:ff:ff:ff
    inet 192.168.31.177/24 brd 192.168.31.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe90:8bc4/64 scope link 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:90:8b:ce brd ff:ff:ff:ff:ff:ff
    inet 192.168.31.171/24 brd 192.168.31.255 scope global dynamic eth1
       valid_lft 21570sec preferred_lft 21570sec
    inet6 fe80::6d0f:bac3:5118:56cd/64 scope link 
       valid_lft forever preferred_lft forever



[root@ansible02:/root]
> ls /etc/sysconfig/network-scripts/ifcfg-eth*
/etc/sysconfig/network-scripts/ifcfg-eth0



[root@ansible02:/root]
> nmcli connection show 
NAME                UUID                                  TYPE            DEVICE 
System eth0         5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03  802-3-ethernet  eth0   
Wired connection 1  828f2e47-127c-33c7-887a-5880973f604c  802-3-ethernet  eth1   

[root@ansible02:/root]
> nmcli connection add con-name eth1 type ethernet ifname eth1 ip4 192.168.31.22/24 gw4 192.168.31.1
Connection 'eth1' (d6ae65d0-77b2-4e99-ae4a-5bf047513f2b) successfully added.

[root@ansible02:/root]
> ls /etc/sysconfig/network-scripts/ifcfg-eth*
/etc/sysconfig/network-scripts/ifcfg-eth0  /etc/sysconfig/network-scripts/ifcfg-