实现与研华PCI采集卡通讯

如果使用过PCI采集卡的盆友应该对“研华”这个品牌不陌生,可以说研华还是很强大的。最近因为工作需要,使用一块研华的PCI1714UL型号的采集卡,去高速采集电压信号,学习了几天后分享给各位。

采集卡

首先介绍一下这块采集卡。品牌:研华Advantech,型号:PCI1714UL,基本参数:4通道,12位精度,采样频率:10MS/s,采样:8192/通道,可采集电压范围有:±5、±2.5、±1、±0.5,每个范围对应的绝对精度不同,所以视情况来决定需要什么样的采样范围。支持PCI总线控制DMA数据传输。

工作方式

这块采集卡有两种工作模式:BufferedAI、InstantAI。

BufferedAI:使用PC的一个存储块,可以实现总线控制数据采集,不需要占用CPU;

InstantAI:瞬时值,采样率相对没那么高,适合一些对数据要求不算太高的场合。

资料下载

官网   资料

驱动安装

研华提供了一款DAQNavi软件(见“资料下载”去官网下载),有一个Navigator,可以直接打开可以看到所有支持的卡,选中你需要的卡右键就可以安装驱动了。并且这款软件也提供数据采集展示。

 

软件二次开发:接口函数---Automation.BDaq4(见“资料下载”去官网下载)

一、使用研华提供的控件进行二次开发

研华提供了相关控件:

 WaveformAiCtrl用于BufferedAI读取,InstantAiCtr用于InstantAI读取。 

二、自己从底层开发

瞬时电压读取比较简单,直接创建InstantAiCtrl,传递一个设备名称:instantAiCtrl.SelectedDevice = new DeviceInformation(deviceCode);初始化:instantAiCtrl.Initialized,就可以开始读取数据了:instantAiCtrl.Read(channelIndex,out data[channelIndex])。

BufferedAI代码量多一点:首先需要创建一个线程,用于将采集卡数据读取到内存中,再开一个线程专门见内存中的数据往本地写入(因为数据量太大不能一下处理),最后开一个线程用于将本地的数据读取出来,进行数据处理、分析、展示。

代码展示

1. 创建一个AnalogCard父类,利于再添加采集卡型号的时候进行扩展

using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading;
using System.Threading.Tasks;
using System.IO;

namespace AdvantechPCIDemo
{
    /// <summary>
    /// 数据读取策略:
    /// 采集卡读取速度极快(10MS/s、30MS/s),因此现将采集卡数据保存至指定文件,多线程同步将数据读取
    /// 再对数据进行处理、显示
    /// </summary>
    public class AnalogCard
    {
        protected int channelCount;//通道数
        protected uint readLength;//数据一次读取长度
        protected uint readCount;

        protected ManualResetEventSlim readEvent = new ManualResetEventSlim(false);
        protected ManualResetEventSlim writeEvent = new ManualResetEventSlim(false);
        protected ManualResetEventSlim readADEvent = new ManualResetEventSlim(false);

        protected Task writeTask;//任务:将内存Queue数据写入指定文件
        protected Task readTask;//任务:将指定文件数据读入内存Queue
        protected Task readADTask;//任务:将采集卡数据读取进内存Queue

        protected Queue<ushort[]> dataQueue = new Queue<ushort[]>(1000);//先进先出队列,定义初始长度,不足自动增长
        protected CancellationTokenSource source = new CancellationTokenSource();//线程是否取消
        protected string fileName = string.Format("Data\\Data-{0}.txt", DateTime.Now.ToString("yy-MM-dd-HH-mm-ss"));//定义数据保存与读取文件名
        protected Action<ushort[][]> ChannelDataAction { get; set; }

        public AnalogCard()
        {
            //将内存Queue数据写入指定文件
            writeTask = Task.Factory.StartNew(() =>
            {
                using (FileStream fs = new FileStream(fileName, FileMode.OpenOrCreate, FileAccess.Write, FileShare.Read))
                {
                    while (true)
                    {
                        writeEvent.Wait(source.Token);//等待开启写入任务
                        if (source.IsCancellationRequested) return;

                        if (dataQueue.Count == 0) continue; ;
                        ushort[] us = dataQueue.Dequeue();//将第一个数据去除并移除
                        if (dataQueue.Count > 1000) { dataQueue.Clear(); }

                        byte[] bt = new byte[readLength * 2];

                        for (int i = 0, j = 0; i < us.Length; i++)
                        {
                            ushort temp = us[i];
                            bt[j++] = (byte)(temp >> 8);//取高八位
                            bt[j++] = (byte)temp;//取低八位
                        }
                        fs.Write(bt, 0, bt.Length);
                    }
                }
            }, source.Token, TaskCreationOptions.LongRunning, TaskScheduler.Default);

            Thread.Sleep(500);

            //将指定文件的数据流写入内存队列Queue
            readTask = Task.Factory.StartNew(() =>
            {
                using (FileStream fs = new FileStream(fileName, FileMode.Open, FileAccess.Read, FileShare.Write))
                {
                    int currentLength = 0;
                    byte[] bt=null;
                    while (true)
                    {
                        readEvent.Wait(source.Token);//等待开启读取
                        if (source.IsCancellationRequested) break;//任务被取消

                        if (bt == null)
                        {
                            bt = new byte[readLength * 2];//byte数组为需要读取数据的两倍:两个字节转换为一个字符
                        }
                        
                        if (currentLength < bt.Length)
                        {
                            currentLength = fs.Read(bt, currentLength, bt.Length - currentLength);
                        }
                        else
                        {
                            currentLength = 0;

                            if (ChannelDataAction == null)
                                throw new Exception("无通道数据接收方法!");

                            ushort[][] us;
                            if (!GetChannelData(bt, out us))
                                throw new Exception("");

                            ChannelDataAction(us);//将读取到的数据向上传递
                        }
                    }
                }
            });
        }

        protected virtual void StartWriteReadTxt()
        {
            writeEvent.Set();
            readEvent.Set();
            readADEvent.Set();

            dataQueue.Clear();
        }

        protected virtual void StopWriteReadTxt()
        {
            writeEvent.Reset();
            readEvent.Reset();
            readADEvent.Reset();
        }

        public virtual void CancelWriteReadTxt()
        {
            source.Cancel();
        }

        /// <summary>
        /// 将读取的数据分到各通道
        /// 数据顺序:temp[0]+temp[1]=ch1va1;temp[2]+temp[3]=ch2va1...
        /// </summary>
        /// <param name="temp"></param>
        /// <returns></returns>
        private bool GetChannelData(byte[] temp, out ushort[][] us)
        {
            us = new ushort[channelCount][];

            int index = 0;
            for (int i = 0; i < temp.Length; i+=2*channelCount)
            {
                
                for (int j = 0; j < channelCount; j++)
                {
                    if (us[j] == null)
                    {
                        us[j] = new ushort[readLength / channelCount];
                    }

                    us[j][index] = (ushort)((temp[i + j * 2] << 8) + temp[i + j * 2 + 1]);
                }
                index++;
            }
            return true;
        }


    }
}
View Code

在父类设置卡的一些基本字段,并创建了两个线程:writeTask、readTask,分别是将内存Queue中数据写入本地txt,将本地txt文件读取进内存Queue。用ManualResetEventSlim对象现将该线程堵塞,等待开启。

2. 创建一个PCI1714UL子类

using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Automation.BDaq;
using System.Threading;
using System.Threading.Tasks;

namespace AdvantechPCIDemo
{
    public class PCI1714UL:AnalogCard
    {
        private string deviceCode = "";
        private const int bufferLength = 2048;
        private int channelMax=0;
        private BufferedAiCtrl bufferedCtrl = null;
        private InstantAiCtrl instantAiCtrl = null;
        private ManualResetEventSlim readADInternal = new ManualResetEventSlim(false);//有数据再开启
        private ushort[] data;
        private object locker = new object();

        public PCI1714UL(string deviceCode):base()
        {
            this.deviceCode = deviceCode;
        }

        public void StartBufferedAI(int channelCount,Action<ushort[][]> channelDataAction)
        {
            bufferedCtrl = new BufferedAiCtrl();
            bufferedCtrl.SelectedDevice = new DeviceInformation(deviceCode);
            
            this.channelCount = channelCount;
            this.readLength = (uint)(bufferLength * channelCount);
            this.readCount = bufferLength;
            this.data = new ushort[readLength];
            this.ChannelDataAction = channelDataAction;

            ScanChannel channel = bufferedCtrl.ScanChannel;
            channel.ChannelCount = channelCount;
            channel.ChannelStart = 0;
            channel.IntervalCount = bufferLength; // each channel 触发DataReady事件的采样个数,即到了指定个数之后便触发DataReady事件,可以跟windows的定时器控件类似
            channel.Samples = bufferLength;//采样的个数。例如,我设定采样个数为1024个,Rate是1024/s,那么也就是说采样经过了1秒   

            bufferedCtrl.DataReady += new EventHandler<BfdAiEventArgs>(BufferedReady);
            this.channelMax = bufferedCtrl.Features.ChannelCountMax;
            bufferedCtrl.Streaming = false;
            ErrorCode ret = bufferedCtrl.Prepare();//初始化所选设备,准备开始
            if (ret != ErrorCode.Success) throw new InvalidOperationException("Failed to prepare AD!");

            //将采集卡数据读取到Queue
            readADTask = Task.Factory.StartNew(() =>
            {
                while (true)
                {
                    readADEvent.Wait(source.Token);//等待开启
                    if (source.IsCancellationRequested) return;

                    if (!StartDevice()) return;//查看设备是否已运行
                    readADInternal.Wait(source.Token);//先等待,有数据传递触发BufferedReady后再开启

                    if (dataQueue.Count > 1000) dataQueue.Clear();

                    dataQueue.Enqueue(data);
                }
            }, source.Token, TaskCreationOptions.LongRunning, TaskScheduler.Default);

            StartWriteReadTxt();
        }

        public void StopBufferedAI()
        {
            bufferedCtrl.Stop();
            //bufferedCtrl.Dispose();
            StopWriteReadTxt();
        }

        public double[] StartInstantAI()
        {
            instantAiCtrl = new InstantAiCtrl();
            instantAiCtrl.SelectedDevice = new DeviceInformation(deviceCode);
            if (!instantAiCtrl.Initialized)
            {
                throw new Exception("No device be selected or device open failed!");
            }
            double[] data=new double[4] ;
            ErrorCode er0 = instantAiCtrl.Read(0,out data[0]);
            ErrorCode er1 = instantAiCtrl.Read(1, out data[1]);
            ErrorCode er2 = instantAiCtrl.Read(2, out data[2]);
            ErrorCode er3 = instantAiCtrl.Read(3, out data[3]);

            return data;
        }

        public void StopInstantAI()
        {
            if (instantAiCtrl.State == ControlState.Running)
            {
                instantAiCtrl.Dispose(); ;
            }
        }

        private bool StartDevice()
        {
            ErrorCode ret;
            if (bufferedCtrl.State != ControlState.Running)
            {
                readADInternal.Reset();

                ret = bufferedCtrl.Start();
                //Thread.Sleep(500);
                if (ret != ErrorCode.Success)
                {
                    //log.ErrorFormat("Failed to start PCI1714 first time! ErrorCode is {0}.", ret);

                    ret = bufferedCtrl.Stop();
                    if (ret != ErrorCode.Success)
                    {
                        //log.ErrorFormat("Failed to stop PCI1714! ErrorCode is {0}.", ret);
                    }

                    Thread.Sleep(500);

                    ret = bufferedCtrl.Start();
                    if (ret != ErrorCode.Success)
                    {
                        //log.ErrorFormat("Failed to start PCI1714 second time! ErrorCode is {0}.", ret);
                        return false;
                    }
                }

            }
            return true;
        }

        public void BufferedReady(object e,BfdAiEventArgs b)
        {
            short[] data = new short[b.Count];
            ErrorCode ret = bufferedCtrl.GetData(b.Count, data);//data存放的是从采集卡得到的数据
            if (ret != ErrorCode.Success)
            {                
                lock (locker)
                {
                    this.data = null;
                    readADInternal.Set();
                }
            }

            lock (locker)
            {
                this.data = data.Select(o => (ushort)o).ToArray();
                readADInternal.Set();
            }
        }
    }
}
View Code

在这个类里,先继承上面的AnalogCard,再设置一些板卡信息。并提供两种方式的数据读取:StartBufferedAI,StartInstantAI。

主要说明StartBufferedAI:

在这里需要再创建一个线程readADTask,用于将采集卡数据读取进内存Queue,同样现将该线程堵塞等待开启。定义一个BufferedReady事件,并进行绑定:bufferedCtrl.DataReady += new EventHandler<BfdAiEventArgs>(BufferedReady);这样采集卡有数据后会自动触发该事件,在该事件中将采集卡数据读取出来。

3. 桌面数据显示

参考研华的数据采集样式,根据数据实时画出数据曲线图。

using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Windows.Forms;
using System.Windows.Forms.DataVisualization.Charting;
using Automation.BDaq;

namespace AdvantechPCIDemo
{
    public partial class FrmMain : Form
    {
        private ushort[][] us;//接受PCI发生来的数据
        private string deviceName = "PCI-1714UL,BID#13";
        public FrmMain()
        {
            InitializeComponent();

            OperateCustomBtn(false);

            DrawGrid(this.pbBuffCh1);
            DrawGrid(this.pbBuffCh2);
            DrawGrid(this.pbBuffCh3);
            DrawGrid(this.pbBuffCh4);

            DrawGrid(this.pbIstantCh1);
            DrawGrid(this.pbIstantCh2);
            DrawGrid(this.pbIstantCh3);
            DrawGrid(this.pbIstantCh4);
        }

        #region 数据列表定义
        private List<Point[]> pointFromBuffAI = new List<Point[]>();
        private List<double[]> dataFromBuffAI = new List<double[]>();

        private List<Point[]> pointFromInstantAI = new List<Point[]>();
        private List<double[]> dataFromInstantAI = new List<double[]>();
        #endregion

        #region 画网格和曲线
        /// <summary>
        /// 画网格
        /// </summary>
        /// <param name="pb"></param>
        private void DrawGrid(PictureBox pb)
        {
            int width = pb.Width, height = pb.Height;
            int cellWidth = height / 4;
            Color color = Color.Green;//绿色线条

            Bitmap bp = new Bitmap(width, height);
            Graphics objG = Graphics.FromImage(bp);
            objG.FillRectangle(new SolidBrush(Color.Black), 0, 0, width, height);//黑色背景

            //网格列
            for (int i = 0; i < width; i += cellWidth)
            {
                objG.DrawLine(new Pen(new SolidBrush(color)), i + cellWidth, 0, i + cellWidth, height);
            }

            //网格行
            for (int i = 0; i < width; i += cellWidth)
            {
                objG.DrawLine(new Pen(new SolidBrush(color)), 0, i + cellWidth, width, i + cellWidth);
            }

            pb.Image = bp;
        }


        /// <summary>
        /// 画动态曲线
        /// </summary>
        /// <param name="channelIndex"></param>
        /// <param name="pb"></param>
        private void DrawBufferedAICurve()
        {
            for (int channel = 0; channel < 4; channel++)
            {
                PictureBox pbTemp = null;
                switch (channel)
                {
                    case 0:
                        pbTemp = this.pbBuffCh1; break;
                    case 1:
                        pbTemp = this.pbBuffCh2; break;
                    case 2:
                        pbTemp = this.pbBuffCh3; break;
                    case 3:
                        pbTemp = this.pbBuffCh4; break;
                }

                int width = pbTemp.Width, height = pbTemp.Height;

                if (pointFromBuffAI.Count == 0)
                {
                    for (int i = 0; i < 4; i++)
                    {
                        pointFromBuffAI.Add(new Point[width]);
                    }
                }
                lock (locker)
                {


                    while (dataFromBuffAI.Count >= width + 2)
                    {
                        dataFromBuffAI.RemoveAt(0);
                    }
                }

                int count = dataFromBuffAI.Count;

                if (count != 0)
                {
                    pointFromBuffAI[channel] = new Point[count];
                }

                for (int i = 0; i < width + 1; i++)
                {
                    if (i >= count) break;

                    if (dataFromBuffAI[i] == null) continue;

                    pointFromBuffAI[channel][i] = new Point(i, (int)(height - ((dataFromBuffAI[i][channel] + 5) * height) / 10));//从负到正                                                                                                                   //prData[channelIndex][i] = new Point(i, (int)(((Math.Abs(showData[i][channelIndex])) * height) / 10));//全负数
                }

                pbTemp.Refresh();
            }
        }

        private void ClearBufferedAICurve()
        {
            Graphics g = Graphics.FromImage(this.pbBuffCh1.Image);
            g.Clear(this.pbBuffCh1.BackColor);

            //DrawGrid(this.pbBuffCh1);
            //DrawGrid(this.pbBuffCh2);
            //DrawGrid(this.pbBuffCh3);
            //DrawGrid(this.pbBuffCh4);
        }

        private void DrawInstantAICurve()
        {
            for (int channel = 0; channel < 4; channel++)
            {
                PictureBox pbTemp = null;
                switch (channel)
                {
                    case 0:
                        pbTemp = this.pbIstantCh1; break;
                    case 1:
                        pbTemp = this.pbIstantCh2; break;
                    case 2:
                        pbTemp = this.pbIstantCh3; break;
                    case 3:
                        pbTemp = this.pbIstantCh4; break;
                }

                int width = pbTemp.Width, height = pbTemp.Height;

                if (pointFromInstantAI.Count == 0)
                {
                    for (int i = 0; i < 4; i++)
                    {
                        pointFromInstantAI.Add(new Point[width]);
                    }
                }
                lock (locker)
                {
                    while (dataFromInstantAI.Count >= width + 2)
                    {
                        dataFromInstantAI.RemoveAt(0);
                    }
                }

                int count = dataFromInstantAI.Count;

                if (count != 0)
                {
                    pointFromInstantAI[channel] = new Point[count];
                }

                for (int i = 0; i < width + 1; i++)
                {
                    if (i >= count) break;

                    if (dataFromInstantAI[i] == null) continue;

                    pointFromInstantAI[channel][i] = new Point(i, (int)(height - ((dataFromInstantAI[i][channel] + 5) * height) / 10));//从负到正                                                                                                                   //prData[channelIndex][i] = new Point(i, (int)(((Math.Abs(showData[i][channelIndex])) * height) / 10));//全负数
                }

                pbTemp.Refresh();
            }
        }

        private List<int> data = new List<int>();

        private Pen redPen = new Pen(Color.Red, 1);
        private void pBCh_Paint(object sender, PaintEventArgs e)
        {
            PictureBox pb = (PictureBox)sender;
            string pbName = pb.Name;

            if (pbName.Contains("pbBuffCh"))
            {
                if (pointFromBuffAI.Count == 4)
                {
                    switch (pbName)
                    {
                        case "pbBuffCh1":
                            if (pointFromBuffAI[0].Count() < 3) break;//画曲线至少需要三个点
                            e.Graphics.DrawCurve(redPen, pointFromBuffAI[0]); break;
                        case "pbBuffCh2":
                            if (pointFromBuffAI[1].Count() < 3) break;
                            e.Graphics.DrawCurve(redPen, pointFromBuffAI[1]); break;
                        case "pbBuffCh3":
                            if (pointFromBuffAI[2].Count() < 3) break;
                            e.Graphics.DrawCurve(redPen, pointFromBuffAI[2]); break;
                        case "pbBuffCh4":
                            if (pointFromBuffAI[3].Count() < 3) break;
                            e.Graphics.DrawCurve(redPen, pointFromBuffAI[3]); break;
                    }
                }
            }
            else if (pbName.Contains("pbIstantCh"))
            {
                if (pointFromInstantAI.Count == 4)
                {
                    switch (pbName)
                    {
                        case "pbIstantCh1":
                            if (pointFromInstantAI[0].Count() < 3) break;//画曲线至少需要三个点
                            e.Graphics.DrawCurve(redPen, pointFromInstantAI[0]); break;
                        case "pbIstantCh2":
                            if (pointFromInstantAI[1].Count() < 3) break;
                            e.Graphics.DrawCurve(redPen, pointFromInstantAI[1]); break;
                        case "pbIstantCh3":
                            if (pointFromInstantAI[2].Count() < 3) break;
                            e.Graphics.DrawCurve(redPen, pointFromInstantAI[2]); break;
                        case "pbIstantCh4":
                            if (pointFromInstantAI[3].Count() < 3) break;
                            e.Graphics.DrawCurve(redPen, pointFromInstantAI[3]); break;
                    }
                }
            }


        }
        #endregion

        #region 界面按钮控制
        private void OperateCustomBtn(bool b)
        {
            this.btnCustomBufferedAI.Enabled = b;
            this.btnCustomInstantAI.Enabled = b;
        }

        private void OperateCtrBtn(bool b)
        {
            this.btnControlInstantAI.Enabled = b;
            this.btnControlBufferedAI.Enabled = b;
        }
        #endregion

        #region 自定义BufferedAI
        PCI1714UL objPCI1714 = null;
        private void btnConfirm_Click(object sender, EventArgs e)
        {
            try
            {
                objPCI1714 = new PCI1714UL(deviceName);
                
                OperateCustomBtn(true);
            }
            catch (Exception ex)
            {
                MessageBox.Show(ex.Message);
            }         
        }

        private void btnStartRead_Click(object sender, EventArgs e)
        {
            try
            {
                //ClearBufferedAICurve();

                objPCI1714.StartBufferedAI(4, ChannelDataAction);
                OperateCtrBtn(false);
                OperateCustomBtn(false);

                bufferedAITimer.Start();
            }
            catch (Exception ex)
            {
                MessageBox.Show(ex.Message);
            }
        }

        private void btnStopCusBuffAI_Click(object sender, EventArgs e)
        {
            try
            {                
                //if (objPCI1714 != null)
                //{
                //    objPCI1714.StopBufferedAI();
                //    //objPCI1714 = null;
                //    bufferedAITimer.Stop();

                //    OperateCustomBtn(true);
                //    OperateCtrBtn(true);
                //}
            }
            catch (Exception ex)
            {
                MessageBox.Show(ex.Message);
            }
        }

        private void ChannelDataAction(ushort[][] us)//动作方法:接受与处理数据,并交给数据展示列表
        {
            this.us = us;

            if (us == null || us[0] == null) return;

            dataFromBuffAI.Add(this.us.Select(u1 =>
            {
                return GetVoltage(u1.Select(u => (double)u).ToList().Average());
            }).ToArray());
        }

        private double GetVoltage(double data)
        {
            return data * 10 / 4095 - 5.0190516943459;
        }


        private void customBufferedAI_Tick(object sender, EventArgs e)
        {
            DrawBufferedAICurve();
        }
        #endregion

        #region 自定义InstantAI
        private void btnCustomInstantAI_Click(object sender, EventArgs e)
        {
            try
            {
                customInstantAI.Start();

                OperateCustomBtn(false);
                OperateCtrBtn(false);
            }
            catch (Exception ex)
            {
                MessageBox.Show(ex.Message);
            }
            
        }

        private void btnStopCusInstantAI_Click(object sender, EventArgs e)
        {
            try
            {
                //if (objPCI1714 != null)
                //{
                //    objPCI1714.StopInstantAI();
                //    objPCI1714 = null;
                //    customInstantAI.Stop();
                //}
            }
            catch (Exception ex)
            {
                MessageBox.Show(ex.Message);
            }
        }

        private void customInstantAI_Tick(object sender, EventArgs e)
        {
            dataFromInstantAI.Add(objPCI1714.StartInstantAI());

            DrawInstantAICurve();
        }
        #endregion

        #region 控件BufferedAI
        //private double[] d;
        private void btnControlBufferedAI_Click(object sender, EventArgs e)
        {
            try
            {
                waveformAiCtrl1.SelectedDevice = new DeviceInformation(deviceName);
                if (!waveformAiCtrl1.Initialized)
                {
                    MessageBox.Show("No device be selected or device open failed!");
                    return;
                }

                int channelCount = waveformAiCtrl1.Conversion.ChannelCount;
                int sectionLength = waveformAiCtrl1.Record.SectionLength;

                //d = new double[channelCount*sectionLength];

                waveformAiCtrl1.Prepare();
                ErrorCode er=ErrorCode.Success;
                if (waveformAiCtrl1.State != ControlState.Running)
                {
                    er = waveformAiCtrl1.Start();
                }
                 
                if (er != ErrorCode.Success)
                {
                    MessageBox.Show("设备打开失败!");
                    return;
                }

                OperateCtrBtn(false);
                OperateCustomBtn(false);

                bufferedAITimer.Start();
            }
            catch (Exception ex)
            {
                MessageBox.Show(ex.Message);
            }
           
        }

        private void btnStopCtrBuffAI_Click(object sender, EventArgs e)
        {
            //if (waveformAiCtrl1.State == ControlState.Idle)
            //{
            //    return;//has been disposed
            //}
            //waveformAiCtrl1.Stop();
            //waveformAiCtrl1.Dispose();
        }

        private object locker = new object();
        private void waveformAiCtrl1_DataReady(object sender, BfdAiEventArgs e)
        {
            double[] data = new double[e.Count];
            ErrorCode er = waveformAiCtrl1.GetData(e.Count, data);
            if (er != ErrorCode.Success)
            {
                return;
            }

            lock (locker)
            {
                for (int i = 0; i < data.Length; i += 4)
                {
                    double[] temp = new double[4];
                    for (int j = 0; j < 4; j++)
                    {
                        temp[j] = data[i + j];
                    }
                    dataFromBuffAI.Add(temp);
                }
            }
        }
        #endregion

        #region 控件InstantAI

        private void btnControlInstantAI_Click(object sender, EventArgs e)
        {
            try
            {
                instantAiCtrl1.SelectedDevice = new DeviceInformation(deviceName);
                if (!instantAiCtrl1.Initialized)
                {
                    MessageBox.Show("No device be selected or device open failed!");
                    return;
                }

                OperateCtrBtn(false);
                OperateCustomBtn(false);

                ctrInstant.Start();
            }
            catch (Exception ex)
            {
                MessageBox.Show(ex.Message);
            }          
        }

        private void btnStopCtrInstantAI_Click(object sender, EventArgs e)
        {
            try
            {
                //ctrInstant.Stop();
            }
            catch (Exception ex)
            {
                MessageBox.Show( ex.Message);
            }
        }

        private void ctrInstant_Tick(object sender, EventArgs e)
        {
            double[] data = new double[4]; ;
            ErrorCode er0 = instantAiCtrl1.Read(0, out data[0]);
            ErrorCode er1 = instantAiCtrl1.Read(1, out data[1]);
            ErrorCode er2 = instantAiCtrl1.Read(2, out data[2]);
            ErrorCode er3 = instantAiCtrl1.Read(3, out data[3]);

            dataFromInstantAI.Add(data);

            DrawInstantAICurve();           
        }
        #endregion              
    }
}
View Code

样式如下图所示:

 

 GitHub

欢迎各位留言讨论!

转载于:https://www.cnblogs.com/EasonDongH/p/8818829.html

  • 3
    点赞
  • 0
    评论
  • 23
    收藏
  • 一键三连
    一键三连
  • 扫一扫,分享海报

表情包
插入表情
评论将由博主筛选后显示,对所有人可见 | 还能输入1000个字符
©️2021 CSDN 皮肤主题: 编程工作室 设计师:CSDN官方博客 返回首页
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、C币套餐、付费专栏及课程。

余额充值