1.zabbix编译安装(环境lnmp)

于 2018-03-02 15:00:00 发布
阅读量143 收藏
点赞数
文章标签： 数据库 php 运维
原文链接：http://www.cnblogs.com/hanxiaohui/p/8493285.html
版权

  • zabbix服务端安装

1.使用脚本安装、脚本内容如下。安装完用http://192.168.159.20/zabbix

#!/bin/bash
#使用说明,此版本是针对程序安装路径不在/opt/下的
#installZabbixServer里已经开启了--enable-agent
#1.上传所需的文件到pageDir
    #libiconv-1.14.tar.gz 
    #mysql-5.6.33-linux-glibc2.5-x86_64.tar.gz 
    #php-5.6.21.tar.gz
    #zabbix-3.2.5.tar.gz
    #nginx-1.10.0.tar.gz
    #nginx.conf
    #msyh.ttf
#服务端安装
#    1.修改变量serverIp 为服务端ip
#    2.sh installZabbix_lnV3.sh
#安装端安装
#    1.修改变量serverIp 为服务端ip
#    2.check_server install_zabbixAgent 脚本最末端只留这个，其它注释掉。
#    3.执行 sh installZabbix_lnV3.sh    
pageDir="/opt/tools/"
bdFile="/tmp/bdFile.txt"
webUser="www"
zabbixUser="zabbix"
mysqlData="/home/mysql"
serverIp="192.168.159.20" #安装zabbix-agent时指定zabbix-server ip
dbhost="127.0.0.1"
dbuser='zabbix'
dbname='zabbix'
dbpassword='123456'
installDir="/opt"
installDir2="\/opt"



[ -f /etc/yum.repos.d/epel-6.repo ] || wget -P /etc/yum.repos.d/ http://mirrors.aliyun.com/repo/epel-6.repo
[ -d ${installDir} ] || mkdir -p ${installDir} 
check_ok() {
if [ $? != 0 ]
then
    echo "Error, Check the error log."
    exit 1
fi
}

myum() {
if ! rpm -qa|grep -q "^$1"

then
    yum install -y $1
    check_ok
else
    echo $1 already installed.
fi
}

myum curl

install_libiconv(){
    cd $pageDir
    [ -f libiconv-1.14.tar.gz ] || wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.14.tar.gz
    [ -d libiconv-1.14 ] || tar zxf libiconv-1.14.tar.gz
    cd libiconv-1.14
    ./configure --prefix=${installDir}/libiconv
    check_ok
    make
    check_ok
    make install 
    check_ok
    rm -rf libiconv-1.14
    check_ok
    echo "install_libiconv" >>  "$bdFile"
    echo "libiconv install ok"    
}
install_phpfpm() {
    cd $pageDir
    [ -f php-5.6.21.tar.gz ] || wget http://cn2.php.net/get/php-5.6.21.tar.gz/from/this/mirror
    [ -d php-5.6.21.tar.gz ] || tar zxf php-5.6.21.tar.gz
    
    for p in  libmcrypt libmcrypt-devel libxslt-devel libxslt zlib-devel libxml2-devel libjpeg-turbo-devel freetype-devel libpng-devel gd-devel libcurl-devel mhash mhash-devel
    do
        myum $p
    done
    if ! grep -q "$webUser" /etc/passwd
        then
            useradd -M -s /sbin/nologin "$webUser"
            check_ok
    fi
    cd php-5.6.21
    ./configure \
    --prefix=${installDir}/php-5.6.21 \
    --with-mysql=mysqlnd \
    --with-mysqli=mysqlnd \
    --with-pdo-mysql=mysqlnd \
    --with-iconv-dir=${installDir}/libiconv/ \
    --with-freetype-dir \
    --with-jpeg-dir \
    --with-png-dir \
    --with-zlib \
    --with-libxml-dir=/usr \
    --enable-xml \
    --disable-rpath \
    --enable-bcmath \
    --enable-shmop \
    --enable-sysvsem \
    --enable-inline-optimization \
    --with-curl \
    --enable-mbregex \
    --enable-fpm \
    --enable-mbstring \
    --with-mcrypt \
    --with-gd \
    --with-gettext \
    --enable-gd-native-ttf \
    --with-openssl \
    --with-mhash \
    --enable-pcntl \
    --enable-sockets \
    --with-xmlrpc \
    --enable-zip \
    --enable-soap \
    --enable-short-tags \
    --enable-static \
    --with-xsl \
    --with-fpm-user="$webUser" \
    --with-fpm-group="$webUser" \
    --enable-fpm \
    --enable-ftp \
    --enable-opcache=yes
        
    check_ok
    make && make install
    check_ok
    ln -sv ${installDir}/php-5.6.21 ${installDir}/php
    check_ok
    [ -f ${installDir}/php/etc/php.ini ] || /bin/cp php.ini-production  ${installDir}/php/etc/php.ini
    if ${installDir}/php/bin/php -i |grep -iq 'date.timezone => no value'
        then
        sed -i '/;date.timezone =$/a\date.timezone = "Asia\/Chongqing"'  ${installDir}/php/etc/php.ini
        check_ok
    fi
    [ -f ${installDir}/php/etc/php-fpm.conf ] || cp ${installDir}/php/etc/php-fpm.conf.default ${installDir}/php/etc/php-fpm.conf
    check_ok
    [ -f /etc/init.d/phpfpm ] || /bin/cp sapi/fpm/init.d.php-fpm /etc/init.d/phpfpm
    chmod 755 /etc/init.d/phpfpm
    chkconfig phpfpm on
    service phpfpm start
    check_ok
    cd $pageDir
    rm -rf  php-5.6.21
    echo "phpfpm install ok"
    echo "install_phpfpm" >>  "$bdFile"

}

install_nginx(){
    for i in pcre pcre-devel zlib gcc openssl openssl-devel zlib-devel
    do
        myum  $i
    done
    cd $pageDir
    [ -f nginx-1.10.0.tar.gz ] || wget  http://nginx.org/download/nginx-1.10.0.tar.gz
    [ -d nginx-1.10.0 ] || tar -zxf nginx-1.10.0.tar.gz
    if ! grep -q "^$webUser" /etc/passwd
        then
            useradd -M -s /sbin/nologin "$webUser"
            check_ok
    fi
    cd nginx-1.10.0
    ./configure \
    --user="$webUser" \
    --group="$webUser" \
    --prefix=${installDir}/nginx-1.10.0 \
    --with-pcre \
    --with-http_stub_status_module \
    --with-http_ssl_module
    check_ok
    make
    check_ok
    make install
    check_ok
    ln -sv ${installDir}/nginx-1.10.0 ${installDir}/nginx
    curl http://www.apelearn.com/study_v2/.nginx_init  -o /etc/init.d/nginx
    sed -i "s@/usr/local@${installDir}@g" /etc/init.d/nginx
    chmod 755 /etc/init.d/nginx
    chkconfig nginx on
    #[ -f nginx.conf ] || curl http://www.apelearn.com/study_v2/.nginx_conf -o ${installDir}/nginx/conf/nginx.conf
    mv ${installDir}/nginx/conf/nginx.conf{,.bak} && cp -a $pageDir/nginx.conf ${installDir}/nginx/conf/
    sed -i "s@/usr/local@${installDir}@g" ${installDir}/nginx/conf/nginx.conf
    check_ok
    sed -i 's#fastcgi_pass unix:/tmp/php-fcgi.sock;#fastcgi_pass 127.0.0.1:9000;#' ${installDir}/nginx/conf/nginx.conf
    service nginx start
    check_ok
    echo -e "<?php\n    phpinfo();\n?>" > ${installDir}/nginx/html/index.php
    check_ok
    cd $pageDir
    rm -rf nginx-1.10.0
    check_ok
    echo "nginx install ok"
    echo "install_nginx" >>  "$bdFile"
    
}

install_mysql(){
    cd $pageDir
    [ -f mysql-5.6.33-linux-glibc2.5-x86_64.tar.gz ] || wget http://mirrors.sohu.com/mysql/MySQL-5.6/mysql-5.6.33-linux-glibc2.5-x86_64.tar.gz
    tar zxf mysql-5.6.33-linux-glibc2.5-x86_64.tar.gz
    check_ok
    [ -d ${installDir}/mysql ] && /bin/mv ${installDir}/mysql ${installDir}/mysql_bak
    mv mysql-5.6.33-linux-glibc2.5-x86_64 ${installDir}/mysql-5.6.33
    if ! grep '^mysql:' /etc/passwd
    then
        useradd -M mysql -s /sbin/nologin
    fi
    for i in  compat-libstdc++-33 libaio libaio-devel
    do
        myum $i
    done
    [ -d $mysqlData ] && /bin/mv $mysqlData $mysqlData_bak
    mkdir -p $mysqlData
    chown -R mysql:mysql $mysqlData
    ln -sv ${installDir}/mysql-5.6.33 ${installDir}/mysql
    cd ${installDir}/mysql
    ./scripts/mysql_install_db --user=mysql --datadir="$mysqlData"
    check_ok
    /bin/cp support-files/my-default.cnf /etc/my.cnf
    check_ok
    sed -i "/^\[mysqld\]$/a\datadir = ${mysqlData}" /etc/my.cnf
    /bin/cp support-files/mysql.server /etc/init.d/mysqld
    sed -i "s#^datadir=#datadir=${mysqlData}#" /etc/init.d/mysqld
    sed -i "s@usr/local@${installDir}@g" /etc/init.d/mysqld
    chmod 755 /etc/init.d/mysqld
    chkconfig --add mysqld
    chkconfig mysqld on
    echo "mysql install ok"
    echo "install_mysql" >>  "$bdFile"
    service mysqld start
    check_ok
    
}

install_zabbixServer(){
    myum net-snmp-devel
    myum mysql-devel
    echo "${installDir}/mysql/lib/" >> /etc/ld.so.conf
    ldconfig
    check_ok
    cd $pageDir
    [ -f zabbix-3.2.5.tar.gz ] || wget http://repo.zabbix.com/zabbix/3.0/ubuntu/pool/main/z/zabbix/zabbix-3.2.5.tar.gz 
    [ -d zabbix-3.2.5 ] || tar zxf zabbix-3.2.5.tar.gz
    if ! grep -q "^$zabbixUser" /etc/passwd
    then
        useradd -M -s /sbin/nologin $zabbixUser 
        check_ok
    fi
    cd zabbix-3.2.5
    ./configure \
    --prefix=${installDir}/zabbix-3.2.5 \
    --enable-server \
    --enable-agent \
    --with-mysql=mysqld \
    --enable-ipv6 --with-net-snmp \
    --with-libcurl --with-libxml2
    check_ok
    make
    check_ok
    make install
    check_ok
    rm -rf ${installDir}/zabbix && ln -sv ${installDir}/zabbix-3.2.5 ${installDir}/zabbix
    check_ok
    
    [ -d ${installDir}/nginx/html/zabbix ] || mkdir -p ${installDir}/nginx/html/zabbix
    cp -R frontends/php/* ${installDir}/nginx/html/zabbix/
    chown -R $webUser.$webUser ${installDir}/nginx/html/zabbix
    check_ok
    rm -f /etc/init.d/zabbix*
    cp misc/init.d/fedora/core/zabbix_server /etc/rc.d/init.d/zabbix_server
    cp misc/init.d/fedora/core/zabbix_agentd /etc/rc.d/init.d/zabbix_agentd
    
    sed -i "s#BASEDIR=/usr/local#BASEDIR=${installDir}/zabbix#" /etc/init.d/zabbix_server
    sed -i "/BASEDIR=${installDir2}\/zabbix$/a\BASECONF=${installDir2}\/zabbix\/etc\/zabbix_server.conf" /etc/init.d/zabbix_server
    sed -i 's/action $"Starting $BINARY_NAME: " $FULLPATH/action $"Starting $BINARY_NAME: " $FULLPATH -c $BASECONF/' /etc/init.d/zabbix_server
    
    sed -i "s/# DBHost=localhost/DBHost=${dbhost}/" ${installDir}/zabbix/etc/zabbix_server.conf
    sed -i "s/# DBPassword=/DBPassword=${dbpassword}/" ${installDir}/zabbix/etc/zabbix_server.conf

    if  ${installDir}/mysql/bin/mysql -uroot  -e "show databases" | grep -q ${dbname} ;then
        ${installDir}/mysql/bin/mysql -uroot  -e "drop database ${dbname};"
    fi
    ${installDir}/mysql/bin/mysql -uroot  -e "create database ${dbname} default character set utf8;"
    check_ok

    if ! ${installDir}/mysql/bin/mysql -uroot  -e "select user from mysql.user where user='${dbuser}';" | grep -q ${dbuser};then
        ${installDir}/mysql/bin/mysql -uroot -e "grant all privileges on ${dbname}.* to '${dbuser}'@'${dbhost}' identified by '${dbpassword}';flush privileges;"
        check_ok
    fi
    
    cd $pageDir
    cd zabbix-3.2.5
    
    ${installDir}/mysql/bin/mysql -u${dbuser} -p${dbpassword} -h ${dbhost} ${dbname} < database/mysql/schema.sql
    check_ok
    ${installDir}/mysql/bin/mysql -u${dbuser} -p${dbpassword} -h ${dbhost} ${dbname} < database/mysql/images.sql
    check_ok
    ${installDir}/mysql/bin/mysql -u${dbuser} -p${dbpassword} -h ${dbhost} ${dbname} < database/mysql/data.sql
    check_ok
    
    
    sed -i 's/post_max_size = 8M/post_max_size = 16M/' ${installDir}/php/etc/php.ini
    sed -i 's/max_execution_time = 30/max_execution_time = 300/' ${installDir}/php/etc/php.ini
    sed -i 's/max_input_time = 60/max_input_time = 300/' ${installDir}/php/etc/php.ini
    sed -i 's/;always_populate_raw_post_data = -1/always_populate_raw_post_data = -1/' ${installDir}/php/etc/php.ini
    if ${installDir}/php/bin/php -i |grep -iq 'date.timezone => no value'
        then
        sed -i '/;date.timezone =$/a\date.timezone = "Asia\/Chongqing"'  ${installDir}/php/etc/php.ini
        check_ok
    fi
    sed -i 's@php_fpm_CONF=${prefix}/etc/php-fpm.conf@php_fpm_CONF=${prefix}/etc/php.ini@' /etc/init.d/phpfpm
    sed -i 's/php_opts="--fpm-config $php_fpm_CONF --pid $php_fpm_PID"/php_opts="-c $php_fpm_CONF --pid $php_fpm_PID"/' /etc/init.d/phpfpm
    
    /etc/init.d/phpfpm restart
    check_ok
    /etc/init.d/zabbix_server start
    check_ok
    chkconfig --add zabbix_server
    check_ok
    chkconfig zabbix_server on
    check_ok 
    
    echo "install zabbix_server ok"
    echo "install_zabbixServer" >>  "$bdFile"


    #客户端

    sed -i "s@BASEDIR=/usr/local@BASEDIR=${installDir}/zabbix@g" /etc/init.d/zabbix_agentd
    sed -i "/BASEDIR=${installDir2}\/zabbix$/a\BASECONF=${installDir2}\/zabbix\/etc\/zabbix_agentd.conf" /etc/init.d/zabbix_agentd
    sed -i 's/action $"Starting $BINARY_NAME: " $FULLPATH/action $"Starting $BINARY_NAME: " $FULLPATH -c $BASECONF/' /etc/init.d/zabbix_agentd
    # Include=/usr/local/etc/zabbix_agentd.conf.d/*.conf
    sed -i "s/Server=127.0.0.1/Server=$serverIp/" ${installDir}/zabbix/etc/zabbix_agentd.conf
    sed -i "s@#\ Include=/usr/local/etc/zabbix_agentd.conf.d/\*.conf@Include=${installDir}/zabbix/etc/zabbix_agentd.conf.d/\*.conf@g" ${installDir}/zabbix/etc/zabbix_agentd.conf
    sed -i 's/ServerActive=127.0.0.1/ServerActive=0.0.0.0:10050/' ${installDir}/zabbix/etc/zabbix_agentd.conf
    sed -i 's/# UnsafeUserParameters=0/UnsafeUserParameters=1/g' ${installDir}/zabbix/etc/zabbix_agentd.conf
    /etc/init.d/zabbix_agentd start
    check_ok
    chkconfig --add zabbix_agentd
    check_ok
    chkconfig zabbix_agentd on
    check_ok 
    echo "install_zabbixAgent install ok"
    echo "install_zabbixAgent" >> "$bdFile"
    
    
}

install_zabbixAgent(){
    if ! grep -q "^$zabbixUser" /etc/passwd
        then
                useradd -M -s /sbin/nologin $zabbixUser
                check_ok
        fi
    cd $pageDir
    [ -f zabbix-3.2.5.tar.gz ] || wget http://repo.zabbix.com/zabbix/3.0/ubuntu/pool/main/z/zabbix/zabbix-3.2.5.tar.gz 
    [ -d zabbix-3.2.5 ] || tar zxf zabbix-3.2.5.tar.gz
    cd zabbix-3.2.5
    ./configure \
    --prefix=${installDir}/zabbix-3.2.5  --enable-agent  
    check_ok
    make
    check_ok
    make install
    check_ok
    [ -l ${installDir}/zabbix ] || ln -sv ${installDir}/zabbix-3.2.5 ${installDir}/zabbix
    cp misc/init.d/fedora/core/zabbix_agentd /etc/rc.d/init.d/zabbix_agentd
    sed -i "s@BASEDIR=/usr/local@BASEDIR=${installDir}/zabbix@g" /etc/init.d/zabbix_agentd
    sed -i "/BASEDIR=${installDir2}\/zabbix$/a\BASECONF=${installDir2}\/zabbix\/etc\/zabbix_agentd.conf" /etc/init.d/zabbix_agentd
    sed -i 's/action $"Starting $BINARY_NAME: " $FULLPATH/action $"Starting $BINARY_NAME: " $FULLPATH -c $BASECONF/' /etc/init.d/zabbix_agentd
    # Include=/usr/local/etc/zabbix_agentd.conf.d/*.conf
    sed -i "s/Server=127.0.0.1/Server=$serverIp/" ${installDir}/zabbix/etc/zabbix_agentd.conf
    sed -i "s@#\ Include=/usr/local/etc/zabbix_agentd.conf.d/\*.conf@Include=${installDir}/zabbix/etc/zabbix_agentd.conf.d/\*.conf@g" ${installDir}/zabbix/etc/zabbix_agentd.conf
    sed -i 's/ServerActive=127.0.0.1/ServerActive=0.0.0.0:10050/' ${installDir}/zabbix/etc/zabbix_agentd.conf
    sed -i 's/# UnsafeUserParameters=0/UnsafeUserParameters=1/g' ${installDir}/zabbix/etc/zabbix_agentd.conf

    #sed -i "s@BASEDIR=/usr/local@BASEDIR=${installDir}/zabbix@g" /etc/init.d/zabbix_agentd
    #sed -i '/BASEDIR='${installDir}'\/zabbix$/a\BASECONF='${installDir}'/zabbix/etc/zabbix_agentd.conf' /etc/init.d/zabbix_agentd
    #sed -i 's/action $"Starting $BINARY_NAME: " $FULLPATH/action $"Starting $BINARY_NAME: " $FULLPATH -c $BASECONF/' /etc/init.d/zabbix_agentd
    
    #sed -i "s/Server=127.0.0.1/Server=$serverIp/" ${installDir}/zabbix/etc/zabbix_agentd.conf
    #sed -i "s/# Include=\/usr\/local\/etc\/zabbix_agentd.conf.d\/*.conf/Include=${installDir}\/zabbix\/etc\/zabbix_agentd.conf.d\/*.conf/" ${installDir}/zabbix/etc/zabbix_agentd.conf
    #sed -i 's/ServerActive=127.0.0.1/ServerActive=0.0.0.0:10050/' ${installDir}/zabbix/etc/zabbix_agentd.conf
    #sed -i 's/# UnsafeUserParameters=0/UnsafeUserParameters=1/g' ${installDir}/zabbix/etc/zabbix_agentd.conf
    /etc/init.d/zabbix_agentd start
    check_ok
    chkconfig --add zabbix_agentd
    check_ok
    chkconfig zabbix_agentd on
    check_ok 
    echo "install_zabbixAgent install ok"
    echo "install_zabbixAgent" >> "$bdFile"
}

check_server(){
        if ! grep -q "$1" "$bdFile"
        then
        "$1"
        fi    
}


check_server install_nginx
check_server install_libiconv
check_server install_phpfpm
check_server install_mysql
check_server install_zabbixServer
#check_server install_zabbixAgent

 2.页面配置

访问http://192.168.159.20/zabbix

点击

 next

 next

Configure DB connection（host:127.0.0.1 port:3306 daname: zabbix user: zabbix password:xxxx） next

配置 zabbix server next

next

finsh

登入默认用户（admin/zabbix）

中文支持 

修改locales.inc.php

          vim /opt/nginx/html/zabbix/include/locales.inc.php

          找到

'zh_CN' => ['name' => _('Chinese (zh_CN)'), 'display' => fales]

            把fales改成true

图片支持中文

         在更换完中文后我们的监控图片会出现乱码因为图片这里不支持中文我们这么做

修改defines.inc.php

#修改第45行改为

define('ZBX_GRAPH_FONT_NAME', 'simkai')

           #修改第93行

define('ZBX_FONT_NAME', 'simkai');

1、从windows下控制面板->字体->选择一种中文字库例如“楷体”

 2、将字体复制到/apps/nginx-1.10.0/html/zabbix/fonts/目录下

3、最后在用户中设置即可

 

 

zabbix_proxy安装和配置

useradd -M -s /sbin/nologin zabbix
yum install mysql-devel net-snmp-devel curl-devel -y
./configure --prefix=/opt/zabbix-proxy --enable-proxy --enable-agent --with-mysql --with-net-snmp --with-libcurl
make && make install

[root@devops etc]# cat zabbix_agentd.conf 
LogFile=/tmp/zabbix_agentd.log
Server=10.200.0.26
ServerActive=127.0.0.1
Hostname=10.200.0.26
Include=/opt/zabbix_proxy/etc/zabbix_agentd.conf.d/*.conf


[root@devops etc]# cat zabbix_proxy.conf
Server=218.70.106.250
Hostname=47.100.217.13
LogFile=/tmp/zabbix_proxy.log
DBHost=218.70.106.250
DBName=zabbix_proxy
DBUser=zabbix_proxy
DBPassword=zabbix@puyi
 DBPort=13306
ConfigFrequency=60
DataSenderFrequency=60
Timeout=4
FpingLocation=/usr/local/sbin/fping
LogSlowQueries=3000


#启动脚本
#!/bin/sh
# chkconfig: 345 95 95
# desctription: Zabbix Proxy
# Zabbix
# Copyright (C) 2001-2013 Zabbix SIA
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.


# Start/Stop the Zabbix agent daemon.
# Place a startup script in /sbin/init.d, and link to it from /sbin/rc[023].d


SERVICE="Zabbix proxy"
DAEMON=/opt/apps/zabbix/zabbix_proxy/sbin/zabbix_proxy
PIDFILE=/tmp/zabbix_proxy.pid
BASEDIR=/opt/apps/zabbix/
ZABBIX_AGENTD=$BASEDIR/zabbix_proxy/sbin/zabbix_proxy
case $1 in
  'start')
    if [ -x ${DAEMON} ]
    then
      $DAEMON
      # Error checking here would be good...
      echo "${SERVICE} started."
    else
echo "Can't find file ${DAEMON}."
      echo "${SERVICE} NOT started."
    fi
  ;;
  'stop')
    if [ -s ${PIDFILE} ]
    then
      if kill `cat ${PIDFILE}` >/dev/null 2>&1
      then
        echo "${SERVICE} terminated."
        rm -f ${PIDFILE}
      fi
    fi
  ;;
  'restart')
    $0 stop
    sleep 10
    $0 start
  ;;
  *)
    echo "Usage: $0 start|stop|restart"
    ;;
esac

控制台添加proxy代理

 

 

centos7 zabbix_agentd启动脚本

[root@devops init.d]# cat /etc/init.d/zabbix_agentd 
#!/bin/bash
#
# chkconfig: - 90 10
# description:  Starts and stops Zabbix Agent using chkconfig
#                Tested on Fedora Core 2 - 5
#                Should work on all Fedora Core versions
#
# @name:    zabbix_agentd
# @author:    Alexander Hagenah <hagenah@topconcepts.com>
# @created:    18.04.2006
#
# Modified for Zabbix 2.0.0
# May 2012, Zabbix SIA
#
# Source function library.
#. /etc/init.d/functions

# Variables
# Edit these to match your system settings

    # Zabbix-Directory
    BASEDIR=/opt/zabbix-proxy
        BASECONF=/opt/zabbix-proxy/etc/zabbix_agentd.conf

    # Binary File
    BINARY_NAME=zabbix_agentd

    # Full Binary File Call
    FULLPATH=$BASEDIR/sbin/$BINARY_NAME

    # PID file
    PIDFILE=/tmp/$BINARY_NAME.pid

    # Establish args
    ERROR=0
    STOPPING=0

#
# No need to edit the things below
#

# application checking status
if [ -f $PIDFILE  ] && [ -s $PIDFILE ]
    then
    PID=`cat $PIDFILE`

    if [ "x$PID" != "x" ] && kill -0 $PID 2>/dev/null && [ $BINARY_NAME == `ps -e | grep $PID | awk '{print $4}'` ]
    then
        STATUS="$BINARY_NAME (pid `pidof $APP`) running.."
        RUNNING=1
    else
        rm -f $PIDFILE
        STATUS="$BINARY_NAME (pid file existed ($PID) and now removed) not running.."
        RUNNING=0
    fi
else
    if [ `ps -e | grep $BINARY_NAME | head -1 | awk '{ print $1 }'` ]
        then
        STATUS="$BINARY_NAME (pid `pidof $APP`, but no pid file) running.."
    else
        STATUS="$BINARY_NAME (no pid file) not running"
    fi
    RUNNING=0
fi

# functions
start() {
    if [ $RUNNING -eq 1 ]
        then
        echo "$0 $ARG: $BINARY_NAME (pid $PID) already running"
    else
        $FULLPATH
        touch /var/lock/subsys/$BINARY_NAME
    fi
}

stop() {
    echo -n $"Shutting down $BINARY_NAME: "
    killproc $BINARY_NAME
    RETVAL=$?
    echo
    [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$BINARY_NAME
    RUNNING=0
}


# logic
case "$1" in
    start)
        start
        ;;
    stop)
        stop
        ;;
    status)
        status $BINARY_NAME
        ;;
    restart)
        stop
        sleep 10
        start
        ;;
    help|*)
        echo $"Usage: $0 {start|stop|status|restart|help}"
        cat <<EOF

            start        - start $BINARY_NAME
            stop        - stop $BINARY_NAME
            status        - show current status of $BINARY_NAME
            restart        - restart $BINARY_NAME if running by sending a SIGHUP or start if not running
            help        - this screen

EOF
    exit 1
    ;;
esac

exit 0

 

 

 

转载于:https://www.cnblogs.com/hanxiaohui/p/8493285.html

aoying5106
关注
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值