文章来源:http://sofar.blog.51cto.com/353572/1601552
==========================================================================================
一、基础介绍
==========================================================================================
1、背景描述
目前我们的高可用DB的代理层采用的是360开源的Atlas,从上线以来,已稳定运行2个多月。无论是从性能上,还是稳定性上,相比其他开源组件(amoeba、cobar、MaxScale、MySQL-Proxy等),还是很出色的。
当初我们之所以选择Atlas,主要看中它有以下优点:
(1)、基于mysql-proxy-0.8.2进行修改,代码完全开源;
(2)、比较轻量级,部署配置也比较简单;
(3)、支持DB读写分离;
(4)、支持从DB读负载均衡,并自动剔除故障从DB;
(5)、支持平滑上下线DB;
(6)、具备较好的安全机制(IP过滤、账号认证);
(7)、版本更新、问题跟进、交流圈子都比较活跃。
在测试期间以及线上问题排查过程中,得到了360 Atlas作者朱超的热心解答,在此表示感谢。有关更多Atlas的介绍,我就不一一例举,可以参考以下链接:
https://github.com/Qihoo360/Atlas/blob/master/README_ZH.md
2、总体架构图
3、系统环境
CentOS 6.3 x86_64
==========================================================================================
二、安装部署
==========================================================================================
1、需注意的地方
(1)、本次安装不使用系统默认的glib库,之前的yum安装只是为了先解决依赖库的问题;
(2)、LUA库的版本不能太高,为5.1.x即可;
(3)、glib库的版本也不能太高,为glib-2.32.x即可;
(4)、对于编译不成功的情况,注意查看下面的说明。
2、GLIB依赖的基础库安装
# yum -y install *glib*
3、LUA库安装
http://ftp.gnu.org/pub/gnu/ncurses/ncurses-5.9.tar.gz
# tar xvzf ncurses-5.9.tar.gz
# cd ncurses-5.9
# ./configure --prefix=/usr/local
# make && make install
ftp://ftp.gnu.org/gnu/readline/readline-6.2.tar.gz
# tar xvzf readline-6.2.tar.gz
# cd readline-6.2
# ./configure --prefix=/usr/local
# make && make install
http://www.lua.org/ftp/lua-5.1.5.tar.gz
# tar xvzf lua-5.1.5.tar.gz
# cd lua-5.1.5
# make linux install
注意:
修改当前目录下的“Makefile”中的 INSTALL_TOP= /usr/local为 INSTALL_TOP= /usr/local/lua
主要是为了避免与系统自带的lua库发生冲突的可能
在“src/Makefile”文件中加入“-lncurses”,完整内容如下:
linux:
$(MAKE) $(ALL) SYSCFLAGS="-DLUA_USE_LINUX" SYSLIBS="-Wl,-E -ldl -lncurses -lreadline"
4、GLIB库安装
ftp://sourceware.org/pub/libffi/libffi-3.0.13.tar.gz
# tar xvzf libffi-3.0.13.tar.gz
# cd libffi-3.0.13
# ./configure --prefix=/usr/local
# make && make install
http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.14.tar.gz
# tar xvzf libiconv-1.14.tar.gz
# cd libiconv-1.14
# ./configure --prefix=/usr/local
# make && make install
http://tukaani.org/xz/xz-5.0.5.tar.gz
# tar xvzf xz-5.0.5.tar.gz
# cd xz-5.0.5
# ./configure --prefix=/usr/local
# make && make install
# /sbin/ldconfig
http://ftp.gnome.org/pub/gnome/sources/glib/2.32/glib-2.32.4.tar.xz
# xz -d glib-2.32.4.tar.xz
# tar -xvf glib-2.32.4.tar
# cd glib-2.32.4
# ./configure --prefix=/usr/local/glib-2.32.4 \
--with-libiconv=/usr/local \
LIBFFI_CFLAGS="-I/usr/local/include" \
LIBFFI_LIBS="-L/usr/local/lib -lffi"
# make && make install
注意:编译报错处理
(1)、configure阶段
# vim ./glib/gconvert.c
注释掉第26、28行的内容
注释掉从61行到67行的内容
# vim ./configure
在7880行之上添加如下内容:
found_iconv=yes
(2)、make阶段
# ln -s /usr/local/lib/libffi-3.0.13/include/ffi.h /usr/local/include
# ln -s /usr/local/lib/libffi-3.0.13/include/ffitarget.h /usr/local/include
glib库需要安装在单独的目录“/usr/local/glib-2.32.4”,也是为了避免与系统自带的glib库发生冲突的可能
5、Atlas安装
(1)、其他基础组件安装
https://github.com/downloads/libevent/libevent/libevent-2.0.21-stable.tar.gz
# tar xvzf libevent-2.0.21-stable.tar.gz
# cd libevent-2.0.21-stable
# ./configure --prefix=/usr/local
# make && make install
http://www.openssl.org/source/openssl-1.0.1h.tar.gz
# tar xvzf openssl-1.0.1h.tar.gz
# cd openssl-1.0.1h
# ./config shared --prefix=/usr/local
# make && make install
(2)、MySQL安装(无需启动)
http://wwwNaNake.org/files/v2.8/cmake-2.8.10.2.tar.gz
# tar -xvzf cmake-2.8.10.2.tar.gz
# cd cmake-2.8.10.2
# ./bootstrap --prefix=/usr/local
# gmake --jobs=`grep processor /proc/cpuinfo | wc -l`
# gmake install
http://downloads.mysql.com/archives/get/file/mysql-5.5.24.tar.gz
# tar -xvzf mysql-5.5.24.tar.gz
# cd mysql-5.5.24
# rm-f CMakeCache.txt
# cmake -DCMAKE_INSTALL_PREFIX=/usr/local/mysql \
-DMYSQL_UNIX_ADDR=/var/run/mysql/mysql.sock \
-DDEFAULT_CHARSET=utf8 \
-DDEFAULT_COLLATION=utf8_general_ci \
-DEXTRA_CHARSETS=all \
-DWITH_MYISAM_STORAGE_ENGINE=1 \
-DWITH_INNOBASE_STORAGE_ENGINE=1 \
-DWITH_READLINE=1 \
-DENABLED_LOCAL_INFILE=1 \
-DWITH_EMBEDDED_SERVER=1 \
-DMYSQL_DATADIR=/data/dbdata/data \
-DMYSQL_TCP_PORT=3306
# make --jobs=`grep processor /proc/cpuinfo | wc -l`
# make install
(3)、DB中间件安装
https://github.com/Qihoo360/Atlas/archive/2.2.1.tar.gz
# tar xvzf Atlas-2.2.1.tar.gz
# cd Atlas-2.2.1
# ./configure --prefix=/usr/local/mysql-proxy \
--with-lua=/usr/local/lua \
--with-mysql=/usr/local/mysql \
GLIB_CFLAGS="-I/usr/local/glib-2.32.4/include/glib-2.0" \
GLIB_LIBS="-L/usr/local/glib-2.32.4/lib/glib-2.0 -lglib-2.0" \
GMODULE_CFLAGS="-I/usr/local/glib-2.32.4/include" \
GMODULE_LIBS="-L/usr/local/glib-2.32.4/lib -lgmodule-2.0" \
GTHREAD_CFLAGS="-I/usr/local/glib-2.32.4/include" \
GTHREAD_LIBS="-L/usr/local/glib-2.32.4/lib -lgthread-2.0" \
LUA_CFLAGS="-I/usr/local/lua/include" \
LUA_LIBS="-L/usr/local/lua/lib -llua-5.1" \
CFLAGS="-DHAVE_LUA_H -O2" \
LDFLAGS="-L/usr/local/lib -L/usr/local/lib64 -lm -ldl -lcrypto"
# make && make install
注意:
编译报错处理
# ln -s /usr/local/glib-2.32.4/lib/glib-2.0/include/glibconfig.h /usr/local/glib-2.32.4/include/glib-2.0
# cd /usr/local
# mv mysql-proxy atlas-2.2.1 && ln -s atlas-2.2.1 mysql-proxy
6、DB中间层配置
(1)、主配置
# vim /usr/local/mysql-proxy/conf/mysql-proxy.cnf
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
|
[mysql-proxy]
admin-username = sysadmin
admin-password = admin2356!@()
proxy-backend-addresses = 10.222.5.224:3306
proxy-read-only-backend-addresses = 10.240.95.107:3306,10.240.95.108:3306
pwds = health_check1:/iZxz+0GRoA=,health_check2:/iZxz+0GRoA=
daemon = true
keepalive = true
event-threads = 16
log-level = message
log-path = /usr/local/mysql-proxy/log
sql-log = ON
proxy-address = 0.0.0.0:3306
admin-address = 10.209.6.101:3307
charset = utf8
|
(2)、启动脚本
# vim /etc/init.d/mysql-proxy
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
|
#!/bin/sh
#
# mysql-proxy This script starts and stops the mysql-proxy daemon
#
# chkconfig: - 78 30
# processname: mysql-proxy
# description: mysql-proxy is a proxy daemon to mysql
# config: /usr/local/mysql-proxy/conf/mysql-proxy.cnf
# pidfile: /usr/local/mysql-proxy/log/mysql-proxy.pid
#
PATH=
/usr/local/sbin
:
/usr/local/bin
:
/sbin
:
/bin
:
/usr/sbin
:
/usr/bin
DAEMON=
"/usr/local/mysql-proxy/bin/mysql-proxy"
CONFIGFILE=
"/usr/local/mysql-proxy/conf/mysql-proxy.cnf"
PIDFILE=
"/usr/local/mysql-proxy/log/mysql-proxy.pid"
LOCKFILE=
"/var/lock/subsys/mysql-proxy"
PROG=`
basename
$DAEMON`
RETVAL=0
start() {
echo
-n $
"Starting ${PROG}......"
[ -x $DAEMON ] ||
exit
5
[ -f $CONFIGFILE ] ||
exit
6
${DAEMON} --defaults-
file
=${CONFIGFILE} ||
echo
-n
"${PROG} already running"
RETVAL=$?
echo
[[ $RETVAL -
eq
0 ]] &&
touch
$LOCKFILE
return
$RETVAL
}
stop() {
echo
-n $
"Stopping ${PROG}......"
if
[[ `
ps
aux |
grep
bin
/mysql-proxy
|
grep
-
v
grep
|
wc
-l` -gt 0 ]];
then
kill
-TERM `
ps
-A -oppid,pid,cmd |
grep
bin
/mysql-proxy
|
grep
-
v
grep
|
awk
'{print $2}'
`
fi
RETVAL=$?
echo
[[ $RETVAL -
eq
0 ]] &&
rm
-f $LOCKFILE $PIDFILE
return
$RETVAL
}
restart() {
stop
sleep
1
start
}
case
"$1"
in
start)
start
;;
stop)
stop
;;
restart)
restart
;;
condrestart)
[[ -e $LOCKFILE ]] && restart
;;
*)
echo
"Usage: $0 {start|stop|restart|condrestart}"
RETVAL=1
;;
esac
exit
$RETVAL
|
# chmod +x /etc/init.d/mysql-proxy
# chmod 0660 /usr/local/mysql-proxy/conf/mysql-proxy.cnf
# service mysql-proxy start
# ps aux | grep mysql-prox[y]
7、Atlas高可用【Keepalived】环境安装
http://rpm5.org/files/popt/popt-1.14.tar.gz
# tar xvzf popt-1.14.tar.gz
# cd popt-1.14
# ./configure --prefix=/usr/local
# make && make install
http://www.carisma.slowglass.com/~tgr/libnl/files/libnl-3.2.24.tar.gz
# tar xvzf libnl-3.2.24.tar.gz
# cd libnl-3.2.24
# ./configure --prefix=/usr/local
# make && make install
# ln -s /usr/local/include/libnl3/netlink /usr/local/include
# /sbin/ldconfig
http://www.keepalived.org/software/keepalived-1.2.10.tar.gz
# tar xvzf keepalived-1.2.10.tar.gz
# cd keepalived-1.2.10
# ./configure --prefix=/usr/local/keepalived
# make && make install
# ln -s /usr/local/keepalived/sbin/keepalived /usr/sbin
# ln -s /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig
# ln -s /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d
# chkconfig --add keepalived
8、Atlas高可用【Keepalived】配置
# mkdir –p /etc/keepalived /data/scripts
(1)、主节点配置
# vim /etc/keepalived/keepalived.conf
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
|
global_defs {
notification_email {
lovezym5@126.com
}
notification_email_from lovezym5@126.com
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id dbproxy1
}
vrrp_script chk_mysql_proxy_health {
script "/data/scripts/keepalived_check_mysql_proxy.sh"
interval 1
weight -2
}
vrrp_instance VI_1 {
state MASTER
interface eth1
virtual_router_id 51
priority 100
advert_int 1
smtp_alert
authentication {
auth_type PASS
auth_pass 123456
}
virtual_ipaddress {
10.209.6.115
}
track_script {
chk_mysql_proxy_health
}
notify_master "/data/scripts/notify.sh master"
notify_bakcup "/data/scripts/notify.sh backup"
notify_fault "/data/scripts/notify.sh fault"
}
|
(2)、备用节点配置
# vim /etc/keepalived/keepalived.conf
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
|
global_defs {
notification_email {
lovezym5@126.com
}
notification_email_from lovezym5@126.com
smtp_server 127.0.0.1
smtp_connect_timeout 30
router_id dbproxy2
}
vrrp_script chk_mysql_proxy_health {
script "/data/scripts/keepalived_check_mysql_proxy.sh"
interval 1
weight -2
}
vrrp_instance VI_1 {
state BACKUP
interface eth1
virtual_router_id 51
priority 90
advert_int 1
smtp_alert
authentication {
auth_type PASS
auth_pass 123456
}
virtual_ipaddress {
10.209.6.115
}
track_script {
chk_mysql_proxy_health
}
notify_master "/data/scripts/notify.sh master"
notify_bakcup "/data/scripts/notify.sh backup"
notify_fault "/data/scripts/notify.sh fault"
}
|
(3)、VIP切换通知脚本
# vim /data/scripts/notify.sh
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
|
#!/bin/sh
PATH=
/sbin
:
/bin
:
/usr/sbin
:
/usr/bin
:
/usr/local/bin
:
/usr/local/sbin
KEEPALIVE_CONF=
"/etc/keepalived/keepalived.conf"
VIP=`
grep
-A 1 virtual_ipaddress ${KEEPALIVE_CONF} |
tail
-1 |
sed
's/\t//g; s/ //g'
`
ETH1_ADDR=`
/sbin/ifconfig
eth1 |
awk
'/inet addr:/{print $2}'
|
awk
-F:
'{print $2}'
`
MONITOR=
"/usr/local/oms/agent/alarm/BusMonitorAgent"
TOKEN=
"ha_monitor"
function
notify() {
TITLE=
"$ETH1_ADDR to be $1: $VIP floating"
CONTENT=
"vrrp transition, $ETH1_ADDR changed to be $1"
${MONITOR} -c 2 -f ${TOKEN} -t
"${TITLE}"
-i
"${CONTENT}"
}
case
"$1"
in
master)
notify master
exit
0
;;
backup)
notify backup
exit
0
;;
fault)
notify fault
exit
0
;;
*)
echo
'Usage: `basename $0` {master|backup|fault}'
exit
1
;;
esac
|
(4)、DB中间层进程检查脚本
# vim /data/scripts/keepalived_check_mysql_proxy.sh
1
2
3
4
5
6
7
|
#!/bin/sh
PATH=
/sbin
:
/bin
:
/usr/sbin
:
/usr/bin
:
/usr/local/bin
:
/usr/local/sbin
if
[[ `pgrep mysql-proxy |
wc
-l` -
eq
0 ]];
then
/sbin/service
mysql-proxy start &&
sleep
5
[[ -z `pgrep mysql-proxy` ]] &&
/sbin/service
keepalived stop
fi
|
# chmod +x /data/scripts/*.sh
# service keepalived start
# ip addr show eth1
# ps aux | grep keepalive[d]
==========================================================================================
三、其他设置
==========================================================================================
1、Atlas服务监控
# vim /usr/local/mysql-proxy/bin/check_service.sh
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
|
#!/bin/sh
PATH=
/sbin
:
/bin
:
/usr/sbin
:
/usr/bin
:
/usr/local/bin
:
/usr/local/sbin
[[ $
# -ne 3 ]] && echo "$0 端口号 协议类型 服务名" && exit 1
SRV_PORT=$1
## 端口号
SRV_PROT=$2
## 协议类型
SRV_NAME=$3
## 服务名
MONITOR=
"/usr/local/oms/agent/alarm/BusMonitorAgent"
TOKEN=
"ha_monitor"
TITLE=
"${SRV_NAME}服务异常监控"
CONTENT=
"${SRV_NAME}服务发生异常,已自动拉起!"
## 是否已正确扫描
SCAN_FLAG=0
function
RESTART_SRV_AND_ALERT()
{
local
CUR_SRV_NAME
[[ $
# -ne 1 ]] && exit 1
CUR_SRV_NAME=$1
TMP_SRV_NAME=`
echo
${CUR_SRV_NAME} |
tr
'[A-Z]'
'[a-z]'
`
[[ ! -f
/etc/init
.d/${TMP_SRV_NAME} ]] && TMP_SRV_NAME=
"${TMP_SRV_NAME}d"
killall -9 ${TMP_SRV_NAME}
if
[[ -z `
ps
aux |
grep
${TMP_SRV_NAME} |
grep
-
v
grep
` ]];
then
/sbin/service
${TMP_SRV_NAME} start >
/dev/null
2>&1
fi
${MONITOR} -c 2 -f ${TOKEN} -t
"${TITLE}"
-i
"${CONTENT}"
rm
-f `
pwd
`
/connect_error
.log
}
ETH1_ADDR=`
/sbin/ifconfig
eth1 |
awk
-F
':'
'/inet addr/{print $2}'
|
sed
's/[a-zA-Z ]//g'
`
TMP_SRV_PROT=`
echo
${SRV_PROT} |
tr
'[A-Z]'
'[a-z]'
`
if
[[
"${TMP_SRV_PROT}"
==
"tcp"
]];
then
PROT_OPT=
"S"
elif
[[
"${TMP_SRV_PROT}"
==
"udp"
]];
then
PROT_OPT=
"U"
else
echo
"未知的协议类型!"
&&
exit
1
fi
## 最多扫描3次,成功一次即可,以避免网络抖动而导致误判
for
((i=0; i<3; i++));
do
RETVAL=`
/usr/bin/nmap
-n -s${PROT_OPT} -p ${SRV_PORT} ${ETH1_ADDR} |
grep
open
`
[[ -n
"${RETVAL}"
]] && SCAN_FLAG=1;
break
||
sleep
10
done
## 1、针对Atlas服务端口不通的情况,也就是服务彻底挂掉
[[ ${SCAN_FLAG} -
ne
1 ]] && RESTART_SRV_AND_ALERT ${SRV_NAME}
## 2、检查Atlas服务是否正常工作,也就是服务端口正常,但访问异常的情况【高权限DB用户】
mysqladmin -h${ETH1_ADDR} -uhealth_check1 -p123456 --connect-timeout=15 --
shutdown
-timeout=15
ping
[[ $? -
ne
0 ]] && RESTART_SRV_AND_ALERT ${SRV_NAME}
## 3、检查Atlas服务是否正常工作,也就是服务端口正常,高权限DB用户访问也正常,但低权限
## DB用户访问异常的情况【低权限DB用户】
mysqladmin -h${ETH1_ADDR} -uhealth_check2 -p123456 --connect-timeout=15 --
shutdown
-timeout=15
ping
[[ $? -
ne
0 ]] && RESTART_SRV_AND_ALERT ${SRV_NAME}
|
2、Atlas访问日志切割
# vim /data/scripts/cut_and_clear_access_log.sh
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
|
#!/bin/sh
# 切割Atlas的访问日志,同时清理15天之前的日志
#
PATH=
/sbin
:
/bin
:
/usr/sbin
:
/usr/bin
:
/usr/local/bin
:
/usr/local/sbin
## mysql-proxy日志路径
LOGPATH=
"/usr/local/mysql-proxy/log"
[[ `
/sbin/ip
addr show eth1 |
grep
inet |
wc
-l` -
eq
2 ]] ||
exit
1
cd
${LOGPATH}
## 日志切割
HISTORY_LOG_PATH=`
date
-d
'-1 hour'
+
"%Y-%m-%d/sql_mysql-proxy_%H.log"
`
[[ -d `
dirname
${HISTORY_LOG_PATH}` ]] ||
mkdir
-p `
dirname
${HISTORY_LOG_PATH}`
cp
-a sql_mysql-proxy.log ${HISTORY_LOG_PATH}
echo
> sql_mysql-proxy.log
## 日志清理
HISTORY_LOG_PATH=`
date
-d
'15 days ago'
+
'%Y-%m-%d'
`
[[ -d ${HISTORY_LOG_PATH} ]] &&
rm
-rf ${HISTORY_LOG_PATH}
|
3、crontab内容添加
# touch /var/lock/check_service.lock
# echo 'touch /var/lock/check_service.lock' >> /etc/rc.d/rc.local
# crontab -uroot -e
1
2
|
* * * * * (flock --timeout=0 /var/lock/check_service.lock /usr/local/mysql-proxy/bin/check_service.sh 3306 tcp mysql-proxy >/dev/null 2>&1)
00 * * * * /data/scripts/cut_and_clear_access_log.sh >/dev/null 2>&1
|
4、平滑设置功能
# mysql -h10.209.6.101 -P3307 -usysadmin -p'admin2356!@()'