Virtual machine is assigned an invalid IP address after a reboot (2012646)

原始链接:http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2012646


To resolve this issue, perform one of these options:
  • Reconnecting the network can remove issues with the virtual connection:
    1. Edit the settings on the virtual machine.
    2. Select Network Adapter.
    3. Deselect Connected.
    4. Click OK to apply the settings.
    5. Navigate to Edit Settings.
    6. Select Network Adapter.
    7. Select Connected.
    8. Click OK to apply the settings.
  • If the above steps did not resolve the issue you need to change the registry in the virtual machine:
Note: This procedure modifies the Windows registry. Before making any registry modifications, ensure that you have a current and valid backup of the registry and the virtual machine. For more information on backing up and restoring the registry, see the Microsoft Knowledge Base article 136393.

The preceding link was correct as of July 21, 2014. If you find the link is broken, provide feedback and a VMware employee will update the link.

To manually edit the registry:
    1. Click Start > Run , type regedit, and click OK. The Registry Editor window opens.
    2. Navigate to the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Tcpip\Parameters\Interfaces registry key.
    3. Select each GUID under Interfaces until you see the 169.254.x.x IP address. This is the value that must be edited.

      Note: GUID is a placeholder for the Globally Unique Identifier of the network adapter that is experiencing this issue. For example, {25892e17-80f6-415f-9c65-7395632f0223}

    4. Change or add these strings:

      Note: To add a new value right-click, select New > String Value. To confirm the version of Windows, clickStart > Run, type winver, and click OK.

      In Windows 2008:

      • Name = ActiveConfigurations
        Type = REG_SZ
        Data = Alternate_{GUID}
      • Name = IPAddress
        Type = REG_SZ
        Data = IP address
      • Name = SubnetMask
        Type = REG_SZ
        Data = Subnet mask
In Windows 2008 R2:
      • Name = IPAddress
        Type = REG_SZ
        Data = IP address of the virtual machine
      • Name = SubnetMask
        Type = REG_SZ
        Data = Subnet mask of the virtual machine
      • Name = DefaultGateway
        Type = REG_SZ
        Data = Gateway address of the virtual machine
Note: Double-click the name to enter the data value.
Note: For more information, see IPv4 Alternate Configuration Tab.

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值