Installing docker.io on centos 6.4 (64-bit)_centos6.4离线安装docker-CSDN博客

NOTES: epel has another package called docker (which is a KDE docking application and is not related to this). So, you will get an error performing these steps, if you have that package already installed.

UPDATE-1: Docker version-0.6.1 is released. Upgrade instructions are available here

UPDATE-2: Docker version-0.6.2 is released.

Docker.io is the lightweight "container engine + image repository" built on top of LXC (linux lightweight containers) to ship any application.

At the core of docker.io there are

an application "/usr/bin/docker"
set of pre-created operating-system/application images hosted with "docker.io"
AUFS (Another Union filesystem) to take care of snapshots, diffs, ro/rw requirements
LXC (Linux lightweight containers)
cgroups (for resource management and namespacing)

As of writing this blog, the latest version is 0.5.3 . The project is actively being developed and things can change in near future.

Follow these instructions to get docker.io installed on your system.

0. Install centos 6.x

1. Disable selinux as it interferes with functionality of LXC

[root@localhost ~]# cat /etc/selinux/config 
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#       enforcing - SELinux security policy is enforced.
#       permissive - SELinux prints warnings instead of enforcing.
#       disabled - SELinux is fully disabled.
SELINUX=disabled
# SELINUXTYPE= type of policy in use. Possible values are:
#       targeted - Only targeted network daemons are protected.
#       strict - Full SELinux protection.
SELINUXTYPE=targeted

2. Download and setup Fedora EPEL Repository

sudo yum install http://ftp.riken.jp/Linux/fedora/epel/6/i386/epel-release-6-8.noarch.rpm

3. Setup hop5.in repository

cd /etc/yum.repos.d
sudo wget http://www.hop5.in/yum/el6/hop5.repo

4. Install docker-io package

[root@localhost ~]# yum install docker-io
Loaded plugins: fastestmirror, security
Loading mirror speeds from cached hostfile
 * base: centos.excellmedia.net
 * epel: kartolo.sby.datautama.net.id
 * extras: centos.excellmedia.net
 * updates: centos.excellmedia.net
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package docker-io.x86_64 0:0.5.3-4.el6 will be installed
--> Processing Dependency: lxc >= 0.8.0 for package: docker-io-0.5.3-4.el6.x86_64
--> Processing Dependency: kernel-ml-aufs >= 3.10.5 for package: docker-io-0.5.3-4.el6.x86_64
--> Running transaction check
---> Package kernel-ml-aufs.x86_64 0:3.10.5-3.el6 will be installed
---> Package lxc.x86_64 0:0.8.0-3.el6 will be installed
--> Processing Dependency: liblxc.so.0()(64bit) for package: lxc-0.8.0-3.el6.x86_64
--> Running transaction check
---> Package lxc-libs.x86_64 0:0.8.0-3.el6 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

============================================================================================
 Package                   Arch              Version                  Repository       Size
============================================================================================
Installing:
 docker-io                 x86_64            0.5.3-4.el6              hop5            1.2 M
Installing for dependencies:
 kernel-ml-aufs            x86_64            3.10.5-3.el6             hop5             33 M
 lxc                       x86_64            0.8.0-3.el6              hop5             81 k
 lxc-libs                  x86_64            0.8.0-3.el6              hop5             75 k

Transaction Summary
============================================================================================
Install       4 Package(s)

Total download size: 34 M
Installed size: 159 M
Is this ok [y/N]: y
Downloading Packages:
(1/4): docker-io-0.5.3-4.el6.x86_64.rpm                              | 1.2 MB     00:03     
(2/4): kernel-ml-aufs-3.10.5-3.el6.x86_64.rpm                        |  33 MB     00:33     
(3/4): lxc-0.8.0-3.el6.x86_64.rpm                                    |  81 kB     00:00     
(4/4): lxc-libs-0.8.0-3.el6.x86_64.rpm                               |  75 kB     00:00     
--------------------------------------------------------------------------------------------
Total                                                       896 kB/s |  34 MB     00:39     
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
  Installing : lxc-libs-0.8.0-3.el6.x86_64                                              1/4 
  Installing : lxc-0.8.0-3.el6.x86_64                                                   2/4 
  Installing : kernel-ml-aufs-3.10.5-3.el6.x86_64                                       3/4 
  Installing : docker-io-0.5.3-4.el6.x86_64                                             4/4 
  Verifying  : kernel-ml-aufs-3.10.5-3.el6.x86_64                                       1/4 
  Verifying  : lxc-0.8.0-3.el6.x86_64                                                   2/4 
  Verifying  : lxc-libs-0.8.0-3.el6.x86_64                                              3/4 
  Verifying  : docker-io-0.5.3-4.el6.x86_64                                             4/4 

Installed:
  docker-io.x86_64 0:0.5.3-4.el6                                                            

Dependency Installed:
  kernel-ml-aufs.x86_64 0:3.10.5-3.el6               lxc.x86_64 0:0.8.0-3.el6              
  lxc-libs.x86_64 0:0.8.0-3.el6                     

Complete!
[root@localhost ~]#

5. See the package is installed correctly

[root@localhost ~]# docker -h
Usage of docker:
  -D=false: Debug mode
  -H=[unix:///var/run/docker.sock]: tcp://host:port to bind/connect to or unix://path/to/socket to use
  -api-enable-cors=false: Enable CORS requests in the remote api.
  -b="": Attach containers to a pre-existing network bridge. Use 'none' to disable container networking
  -d=false: Daemon mode
  -dns="": Set custom dns servers
  -g="/var/lib/docker": Path to graph storage base dir.
  -p="/var/run/docker.pid": File containing process PID
  -r=false: Restart previously running containers

6. Add cgroup filesystem to /etc/fstab , so that docker will work correctly

[root@localhost ~]# echo "none                    /sys/fs/cgroup          cgroup  defaults        0 0" >> /etc/fstab

[root@localhost ~]# mount /sys/fs/cgroup

Per "Peter Zimmerman" a reboot is needed to actually mount /sys/fs/cgroup (due to the kernel doesn't have cgroup support). So, the above mount step is not really needed. As its used only upon reboot.

7. Reboot the system ; make sure to select "3.10.5-3.el6.x86_64" kernel version while booting.

8. Once system is up and running, make sure you are on right kernel

[root@localhost ~]# uname -r
3.10.5-3.el6.x86_64

[root@localhost ~]# grep aufs /proc/filesystems 
nodev   aufs

9. Start the docker.io in daemon mode (in a different terminal)

[root@localhost ~]# docker -d 
2013/08/21 07:47:07 WARNING: Your kernel does not support cgroup swap limit.
2013/08/21 07:47:07 Listening for HTTP on /var/run/docker.sock (unix)

10. Print hello world from a centos 6.4 container.

[root@localhost ~]# docker run centos:6.4 echo "hello world"
2013/08/21 07:48:41 POST /v1.4/containers/create
2013/08/21 07:48:41 POST /v1.4/containers/c6bc9e80097e/start
2013/08/21 07:48:41 POST /v1.4/containers/c6bc9e80097e/attach?logs=1&stderr=1&stdout=1&stream=1
hello world

11. Ping from inside the container

[root@localhost ~]# docker -dns '8.8.8.8' run centos:6.4 ping -c 3 yahoo.com
2013/08/21 08:02:15 POST /v1.4/containers/create
2013/08/21 08:02:15 POST /v1.4/containers/c40a1244f9bc/start
2013/08/21 08:02:15 POST /v1.4/containers/c40a1244f9bc/attach?logs=1&stderr=1&stdout=1&stream=1
PING yahoo.com (98.138.253.109) 56(84) bytes of data.
64 bytes from ir1.fp.vip.ne1.yahoo.com (98.138.253.109): icmp_seq=1 ttl=48 time=323 ms
64 bytes from ir1.fp.vip.ne1.yahoo.com (98.138.253.109): icmp_seq=2 ttl=48 time=329 ms
64 bytes from ir1.fp.vip.ne1.yahoo.com (98.138.253.109): icmp_seq=3 ttl=49 time=302 ms

--- yahoo.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2304ms
rtt min/avg/max/mdev = 302.032/318.318/329.656/11.807 ms

TROUBLESHOOTING

"DNS/Networking Errors inside the docker"

[root@localhost ~]# docker -dns="8.8.8.8" run centos:6.4 yum install hiphop-php
2013/08/21 07:53:05 POST /v1.4/containers/create
2013/08/21 07:53:05 POST /v1.4/containers/6d9fef14bd1a/start
2013/08/21 07:53:05 POST /v1.4/containers/6d9fef14bd1a/attach?logs=1&stderr=1&stdout=1&stream=1
Loaded plugins: fastestmirror
Error: Cannot retrieve repository metadata (repomd.xml) for repository: base. Please verify its path and try again
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os error was
14: PYCURL ERROR 6 - "Couldn't resolve host 'mirrorlist.centos.org'"

Please issue the following commands, so that docker and its environment will be reset and above issue will be taken care of.

pkill docker
iptables -t nat -F
ifconfig docker0 down
brctl delbr docker0
docker -d

following commands:

pkill docker
iptables -t nat -F
ifconfig docker0 down
brctl delbr docker0
docker -d

It will force docker to recreate the bridge and reinit all the network rules

CREDITS: Thanks to sciurus for doing the hardwork in creating the spec file for kernel-ml-aufs.

原文地址

初始化脚本一个:

!/bin/bash
 
### BEGIN INIT INFO
# INIT INFO
# Provides:          docker
# Required-Start:    networking
# Required-Stop:     networking
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: docker
# Description:       docker
### END INIT INFO
 
. /etc/init.d/functions
 
NAME=docker
PID_FILE="/var/run/${NAME}.pid"
DELAY=0
 
status_q() {
  status -p $PID_FILE $NAME > /dev/null
  return $?
}
 
start_app() {
   nohup /usr/bin/docker -d >/var/log/docker.log 2>&1 </dev/null &
   return $?
}
 
start() {
        status_q; res=$?
 
  if [ $res -eq 3 ]; then
           echo -n $"$NAME starting..."
 
           start_app
 
           echo $! > $PID_FILE
 
           [ $DELAY -gt 0 ] && sleep $DELAY
           status_q; res=$?
 
           [ $res -eq 0 ] && success || failure
           echo
        elif [ $res -eq 0 ]; then
           success; echo "$NAME is already running"
        else
           failure; echo "$NAME is not running, res: $res"
        fi
        return $res
}
 
 
stop() {
        status_q; res=$?
        if [ $res -eq 3 ]; then
           success && echo "$NAME is not running"
        else
           killproc -p $PID_FILE; res=$?
 
           if [ $res -eq 0 ]; then
             rm -f PID_FILE
             success && echo "$NAME has been stopped"
           else
             failure && echo "$NAME cannot be stopped ($res)"
           fi
        fi
 
        return $res
}
 
case $1 in
  start)
           start
           exit $?
  ;;
  stop)
           stop
           exit $?
  ;;
  status)
     echo -n $"$NAME running..."
           status_q; res=$?
 
     [ $res -eq 0 ] && success || failure
     echo
           exit $res
  ;;
  restart)
           stop
           start
           exit $?
  ;;
  *)
    echo "Usage: $0 {start|stop|restart|status}"
    exit 2
    ;;
esac

其他链接:

http://qing.blog.sina.com.cn/2294942122/88ca09aa33003ydp.html