mini2440之2.6.34内核编译

 

mini2440之2.6.34内核编译 (2010-05-23 09:46)

分类：  ARM-Linux研究

最近linux-2.6.34内核已经发布，我就download下来编译，基本没有太多的修改，只需要修该Makefile两行
ARCH        ?= arm
CROSS_COMPILE    ?= arm-linux- //这个是交叉编译工具
然后运行 make mini2440_defconfig
修改arch/arm/mach-s3c2440/mach-mini2440.c

+#include <linux/irq.h>
 static void __init mini2440_map_io(void)
 {
+    unsigned int value; //tekkaman for dm9000
     s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
     s3c24xx_init_clocks(12000000);
     s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
 
+
+//******************************tekkaman for dm9000********************************
+//config the bwscon for bank 4
+    value = __raw_readl(S3C2410_BWSCON);
+    value &= ~(S3C2410_BWSCON_WS4|
+           S3C2410_BWSCON_ST4|
+           S3C2410_BWSCON_DW4_32);
+    value |= (S3C2410_BWSCON_ST4|
+          S3C2410_BWSCON_DW4_16);
+    __raw_writel(value, S3C2410_BWSCON);
+
+//config the bankcon4
+    value = 0;
+    value = (S3C2410_BANKCON_Tacs4|
+         S3C2410_BANKCON_Tcos4|
+         S3C2410_BANKCON_Tacc14|
+         S3C2410_BANKCON_Tcoh4|
+         S3C2410_BANKCON_Tcah4|
+         S3C2410_BANKCON_Tacp6|
+         S3C2410_BANKCON_PMCnorm);
+    __raw_writel(value,S3C2410_BANKCON4);
+
+//config the irq pin (for mini2440' dm9000 )
+    set_irq_type(IRQ_EINT7,IRQ_TYPE_LEVEL_HIGH);
+    s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPF7_EINT7);
+    s3c2410_gpio_pullup(S3C2410_GPF(7), 0);
+//******************************tekkaman for dm9000********************************
 }
 
再make，十分钟飘过，内核就OK 了。
测试我用uboot+NFS启动。

 

 

转自：http://blog.chinaunix.net/space.php?uid=20854037&do=blog&cuid=2239164

但是好像背光及触摸不正常！

 

如果提示dm9000 Ethernet Driver, V1.31 dm9000 dm9000: eth%d: Invalid ethernet MAC address. Please set using ifconfig 

则编辑 device/net/dm9000.c，插入一行代码如下：

1587 if (!is_valid_ether_addr(ndev->dev_addr)) { 1588 /* try reading from mac */ 1589 1590 mac_src = "chip"; 1591 for (i = 0; i < 6; i++) 1592 ndev->dev_addr[i] = ior(db, i+DM9000_PAR); 1593 } 1594 1595 + memcpy(ndev->dev_addr, "/x08/x90/x90/x90/x90/x90",6); 1596 1597 if (!is_valid_ether_addr(ndev->dev_addr)) 1598 dev_warn(db->dev, "%s: Invalid ethernet MAC address. Please " 1599 "set using ifconfig/n", ndev->name);