cisco思科交换机恢复出厂设置清除配置的方法

转载：https://blog.51cto.com/304514244/1555230

方法1：

开机状态下

F3-2F#erase startup-config

Erasing the nvram filesystem will remove all configuration files! Continue? [confirm]

[OK]

Erase of nvram: complete

*Mar 1 00:04:19.946: %IP_SNMP-4-NOTRAPIP: SNMP trap source FastEthernet0/1 has no ip address

*Mar 1 00:04:21.204: %SYS-7-NV_BLOCK_INIT: Initialized the geometry of nvram

F3-2F#reload

Proceed with reload? [confirm]

*Mar 1 00:04:44.893: %SYS-5-RELOAD: Reload requested by console. Reload reason: Reload command

*Mar 1 00:04:44.902: %IP_SNMP-4-NOTRAPIP: SNMP trap source FastEthernet0/1 has no ip address

Boot Sector Filesystem (bs) installed, fsid: 2

Base ethernet MAC Address: cc:d5:39:02:80:00

Xmodem file system is availa