6410 booting log

<6>Initializing cgroup subsys cpu
<5>Linux version 2.6.36-FriendlyARM (chenqiang@chenqiang-laptop) (gcc version 4.5.1 (ctng-1.8.1-FA) ) #3 PREEMPT Mon Apr 22 21:50:33 CST 2013
<4>CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
<4>CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
<4>Machine: MINI6410
<4>MINI6410: S70 selected
<4>Memory policy: ECC disabled, Data cache writeback
<4>CPU S3C6410 (id 0x36410101)
<7>s3c6410_init_clocks: initialising clocks
<6>S3C24XX Clocks, Copyright 2004 Simtec Electronics
<3>camera: no parent clock specified
<7>s3c6400_setup_clocks: registering clocks
<7>s3c6400_setup_clocks: clkdiv0 = 01043310
<7>s3c6400_setup_clocks: xtal is 12000000
<6>S3C64XX: PLL settings, A=532000000, M=532000000, E=24000000
<6>S3C64XX: HCLK2=266000000, HCLK=133000000, PCLK=66500000
<6>mout_apll: source is fout_apll (1), rate is 532000000
<6>mout_epll: source is epll (1), rate is 24000000
<6>mout_mpll: source is mpll (1), rate is 532000000
<6>mmc_bus: source is mout_epll (0), rate is 24000000
<6>mmc_bus: source is mout_epll (0), rate is 24000000
<6>mmc_bus: source is mout_epll (0), rate is 24000000
<6>usb-bus-host: source is clk_48m (0), rate is 48000000
<7>s3c64xx_clk_doutmpll_get_rate: parent is 532000000
<6>uclk1: source is dout_mpll (1), rate is 66500000
<6>spi-bus: source is mout_epll (0), rate is 24000000
<6>spi-bus: source is mout_epll (0), rate is 24000000
<6>audio-bus: source is mout_epll (0), rate is 24000000
<6>audio-bus: source is mout_epll (0), rate is 24000000
<6>audio-bus: source is mout_epll (0), rate is 24000000
<6>irda-bus: source is mout_epll (0), rate is 24000000
<3>camera: no parent clock specified
<6>s3c64xx: 6291456 bytes SDRAM reserved for fimc at 0x5f9f8000
<6>s3c64xx: 8388608 bytes SDRAM reserved for pp at 0x5f1f8000
<6>s3c64xx: 8388608 bytes SDRAM reserved for tv at 0x5e9f8000
<6>s3c64xx: 2097152 bytes SDRAM reserved for jpeg at 0x5e7f8000
<6>s3c64xx: 16777216 bytes SDRAM reserved for pmem at 0x5d7f8000
<6>s3c64xx: 33554432 bytes SDRAM reserved for pmem_gpu1 at 0x5b7f8000
<6>s3c64xx: 8388608 bytes SDRAM reserved for pmem_adsp at 0x5aff8000
<7>On node 0 totalpages: 65536
<7>free_area_init_node: node 0, pgdat c07023c8, node_mem_map c07ba000
<7>  Normal zone: 512 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 65024 pages, LIFO batch:15
<4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
<5>Kernel command line: root=ubi0:FriendlyARM-root ubi.mtd=2 rootfstype=ubifs  init=/linuxrc console=ttySAC0,115200 androidboot.console=s3c2410_serial0 lcd=S70
<6>PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Memory: 256MB = 256MB total
<5>Memory: 170044k/170044k available, 92100k reserved, 0K highmem
<5>Virtual kernel memory layout:
<5>    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>    DMA     : 0xff600000 - 0xffe00000   (   8 MB)
<5>    vmalloc : 0xd0800000 - 0xe0000000   ( 248 MB)
<5>    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
<5>    modules : 0xbf000000 - 0xc0000000   (  16 MB)
<5>      .init : 0xc0008000 - 0xc0165000   (1396 kB)
<5>      .text : 0xc0165000 - 0xc06a4000   (5372 kB)
<5>      .data : 0xc06c6000 - 0xc07029e0   ( 243 kB)
<6>SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>Hierarchical RCU implementation.
<6>    RCU-based detection of stalled CPUs is disabled.
<6>    Verbose stalled-CPUs detection is disabled.
<6>NR_IRQS:246
<7>s3c64xx_init_irq: initialising interrupts
<6>VIC @f4000000: id 0x00041192, vendor 0x41
<6>VIC @f4010000: id 0x00041192, vendor 0x41
<4>High resolution timer: rate = 66500000, HZ = 100
<4>Console: colour dummy device 80x30
<6>console [ttySAC0] enabled
<6>Calibrating delay loop... 530.84 BogoMIPS (lpj=2654208)
<6>pid_max: default: 32768 minimum: 301
<4>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys debug
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys freezer
<6>CPU: Testing write buffer coherency: ok
<6>NET: Registered protocol family 16
<6>s3c64xx_dma_init: Registering DMA channels
<6>s3c64xx_dma_init1: registering DMA 0 (d0808100)
<6>s3c64xx_dma_init1: registering DMA 1 (d0808120)
<6>s3c64xx_dma_init1: registering DMA 2 (d0808140)
<6>s3c64xx_dma_init1: registering DMA 3 (d0808160)
<6>s3c64xx_dma_init1: registering DMA 4 (d0808180)
<6>s3c64xx_dma_init1: registering DMA 5 (d08081a0)
<6>s3c64xx_dma_init1: registering DMA 6 (d08081c0)
<6>s3c64xx_dma_init1: registering DMA 7 (d08081e0)
<6>PL080: IRQ 73, at d0808000
<6>s3c64xx_dma_init1: registering DMA 8 (d080c100)
<6>s3c64xx_dma_init1: registering DMA 9 (d080c120)
<6>s3c64xx_dma_init1: registering DMA 10 (d080c140)
<6>s3c64xx_dma_init1: registering DMA 11 (d080c160)
<6>s3c64xx_dma_init1: registering DMA 12 (d080c180)
<6>s3c64xx_dma_init1: registering DMA 13 (d080c1a0)
<6>s3c64xx_dma_init1: registering DMA 14 (d080c1c0)
<6>s3c64xx_dma_init1: registering DMA 15 (d080c1e0)
<6>PL080: IRQ 74, at d080c000
<4>S3C6410: Initialising architecture
<4>bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>s3c-i2c s3c2440-i2c: slave address 0x10
<6>s3c-i2c s3c2440-i2c: bus frequency set to 377 KHz
<6>s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
<6>Advanced Linux Sound Architecture Driver Version 1.0.23.
<6>Bluetooth: Core ver 2.15
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>Switching to clocksource clock_source_timer2
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 8192 bind 8192)
<6>TCP reno registered
<6>UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>ashmem: initialized
<6>squashfs: version 4.0 (2009/01/31) Phillip Lougher
<7>yaffs built Apr 22 2013 21:19:42 Installing.
<6>io scheduler noop registered (default)
<6>io scheduler cfq registered
<4>S3C_LCD clock got enabled :: 133.000 Mhz
<6>LCD TYPE :: Mini6410 will be initialized
<4>Window[0] - FB1: map_video_memory: clear ff600000:00177000
<4>            FB1: map_video_memory: dma=5a000000 cpu=ff600000 size=00177000
<4>Window[0] - FB2: map_video_memory: clear ff6bb800:000bb800
<4>            FB2: map_video_memory: dma=5a0bb800 cpu=ff6bb800 size=000bb800
<4>Console: switching to colour frame buffer device 100x30
<6>fb0: s3cfb frame buffer device
<4>Window[1] - FB1: map_video_memory: clear ff800000:00177000
<4>            FB1: map_video_memory: dma=5a200000 cpu=ff800000 size=00177000
<4>Window[1] - FB2: map_video_memory: clear ff8bb800:000bb800
<4>            FB2: map_video_memory: dma=5a2bb800 cpu=ff8bb800 size=000bb800
<6>fb1: s3cfb frame buffer device
<4>backlight    initialized
<4>leds    initialized
<4>pwm    initialized
<4>adc    initialized
<6>s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
<6>s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
<6>s3c6400-uart.2: s3c2410_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10
<6>s3c6400-uart.3: s3c2410_serial3 at MMIO 0x7f005c00 (irq = 28) is a S3C6400/10
<6>loop: module loaded
<6>pmem: 1 init
<6>pmem_gpu1: 0 init
<6>pmem_adsp: 0 init
<4>S3C NAND Driver, (c) 2008 Samsung Electronics
<4>MLC nand initialized, 2011 ported by FriendlyARM
<4>S3C NAND Driver is using hardware ECC.
<6>NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V 8-bit)
<5>Creating 3 MTD partitions on "NAND 2GiB 3,3V 8-bit":
<5>0x000000000000-0x000000400000 : "Bootloader"
<5>0x000000400000-0x000000c00000 : "Kernel"
<5>0x000000c00000-0x000080000000 : "File System"
<5>UBI: attaching mtd2 to ubi0
<5>UBI: physical eraseblock size:   1048576 bytes (1024 KiB)
<5>UBI: logical eraseblock size:    1032192 bytes
<5>UBI: smallest flash I/O unit:    8192
<5>UBI: VID header offset:          8192 (aligned 8192)
<5>UBI: data offset:                16384
<5>UBI: max. sequence number:       51
<5>UBI: attached mtd2 to ubi0
<5>UBI: MTD device name:            "File System"
<5>UBI: MTD device size:            2036 MiB
<5>UBI: number of good PEBs:        2033
<5>UBI: number of bad PEBs:         3
<5>UBI: max. allowed volumes:       128
<5>UBI: wear-leveling threshold:    4096
<5>UBI: number of internal volumes: 1
<5>UBI: number of user volumes:     1
<5>UBI: available PEBs:             0
<5>UBI: total number of reserved PEBs: 2033
<5>UBI: number of PEBs reserved for bad PEB handling: 20
<5>UBI: max/mean erase counter: 2/0
<5>UBI: image sequence number:  1378164781
<5>UBI: background thread "ubi_bgt0d" started, PID 619
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>dm9000 Ethernet Driver, V1.31
<6>eth0: dm9000a at d0930000,d0e00004 IRQ 108 MAC: 08:90:90:90:90:90 (chip)
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<7>ohci_hcd: block sizes: ed 64 td 64
<7>s3c2410-ohci s3c2410-ohci: s3c2410_start_hc:
<6>s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
<7>drivers/usb/core/inode.c: creating file 'devices'
<7>drivers/usb/core/inode.c: creating file '001'
<6>s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
<6>s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000
<7>s3c2410-ohci s3c2410-ohci: created debug files
<7>s3c2410-ohci s3c2410-ohci: OHCI controller state
<7>s3c2410-ohci s3c2410-ohci: OHCI 1.0, NO legacy support registers
<7>s3c2410-ohci s3c2410-ohci: control 0x083 HCFS=operational CBSR=3
<7>s3c2410-ohci s3c2410-ohci: cmdstatus 0x00000 SOC=0
<7>s3c2410-ohci s3c2410-ohci: intrstatus 0x00000004 SF
<7>s3c2410-ohci s3c2410-ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
<7>s3c2410-ohci s3c2410-ohci: hcca frame #0005
<7>s3c2410-ohci s3c2410-ohci: roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2(2)
<7>s3c2410-ohci s3c2410-ohci: roothub.b 00000000 PPCM=0000 DR=0000
<7>s3c2410-ohci s3c2410-ohci: roothub.status 00008000 DRWE
<7>s3c2410-ohci s3c2410-ohci: roothub.portstatus [0] 0x00010101 CSC PPS CCS
<7>s3c2410-ohci s3c2410-ohci: roothub.portstatus [1] 0x00000100 PPS
<7>usb usb1: default language 0x0409
<7>usb usb1: udev 1, busnum 1, minor = 0
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: S3C24XX OHCI
<6>usb usb1: Manufacturer: Linux 2.6.36-FriendlyARM ohci_hcd
<6>usb usb1: SerialNumber: s3c24xx
<7>usb usb1: usb_probe_device
<7>usb usb1: configuration #1 chosen from 1 choice
<7>usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>hub 1-0:1.0: usb_probe_interface
<7>hub 1-0:1.0: usb_probe_interface - got id
<6>hub 1-0:1.0: USB hub found
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa006,0x2900,0x0000,ca827ba8,000f)
<6>hub 1-0:1.0: 2 ports detected
<7>hub 1-0:1.0: standalone hub
<7>hub 1-0:1.0: no power switching (usb 1.0)
<7>hub 1-0:1.0: no over-current protection
<7>hub 1-0:1.0: power on to power good time: 4ms
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa000,0x0000,0x0000,ca827b58,0004)
<7>hub 1-0:1.0: local power source is good
<7>hub 1-0:1.0: trying to enable port power on non-switchable hub
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0x2303,0x0008,0x0001,ca827b30,0000)
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0x2303,0x0008,0x0002,ca827b30,0000)
<7>drivers/usb/core/inode.c: creating file '001'
<6>usbcore: registered new interface driver usbserial
<6>USB Serial support registered for generic
<6>usbcore: registered new interface driver usbserial_generic
<6>usbserial: USB Serial Driver core
<6>USB Serial support registered for GSM modem (1-port)
<6>usbcore: registered new interface driver option
<6>option: v0.7.2:USB Driver for GSM modems
<6>USB Serial support registered for aircable
<6>usbcore: registered new interface driver aircable
<6>USB Serial support registered for ark3116
<6>usbcore: registered new interface driver ark3116
<6>ark3116:v0.6:USB ARK3116 serial/IrDA driver
<6>USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
<6>usbcore: registered new interface driver belkin
<6>belkin_sa: v1.3:USB Belkin Serial converter driver
<6>USB Serial support registered for ch341-uart
<6>usbcore: registered new interface driver ch341
<6>USB Serial support registered for cp210x
<6>usbcore: registered new interface driver cp210x
<6>cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
<6>USB Serial support registered for Reiner SCT Cyberjack USB card reader
<6>usbcore: registered new interface driver cyberjack
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0001,ca84fe18,0004)
<7>s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
<7>hub 1-0:1.0: port 1: status 0101 change 0001
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0x2301,0x0010,0x0001,ca84fe48,0000)
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca84fe18,0004)
<6>cyberjack: v1.01 Matthias Bruestle
<6>cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
<6>USB Serial support registered for DeLorme Earthmate USB
<6>USB Serial support registered for HID->COM RS232 Adapter
<6>USB Serial support registered for Nokia CA-42 V2 Adapter
<6>usbcore: registered new interface driver cypress
<6>cypress_m8: v1.10:Cypress USB to Serial Driver
<6>USB Serial support registered for debug
<6>usbcore: registered new interface driver debug
<6>USB Serial support registered for Digi 2 port USB adapter
<6>USB Serial support registered for Digi 4 port USB adapter
<6>usbcore: registered new interface driver digi_acceleport
<6>digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver
<6>USB Serial support registered for Edgeport 2 port adapter
<6>USB Serial support registered for Edgeport 4 port adapter
<6>USB Serial support registered for Edgeport 8 port adapter
<6>USB Serial support registered for EPiC device
<6>usbcore: registered new interface driver io_edgeport
<6>io_edgeport: v2.7:Edgeport USB Serial Driver
<6>USB Serial support registered for Edgeport TI 1 port adapter
<7>hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0001,ca8b1e18,0004)
<7>hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0x2303,0x0004,0x0001,ca8b1db8,0000)
<6>USB Serial support registered for Edgeport TI 2 port adapter
<6>usbcore: registered new interface driver io_ti
<6>io_ti: v0.7mode043006:Edgeport USB Serial Driver
<6>USB Serial support registered for empeg
<6>usbcore: registered new interface driver empeg
<6>empeg: v1.3:USB Empeg Mark I/II Driver
<6>USB Serial support registered for FTDI USB Serial Device
<6>usbcore: registered new interface driver ftdi_sio
<6>ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
<6>USB Serial support registered for funsoft
<6>usbcore: registered new interface driver funsoft
<6>USB Serial support registered for Garmin GPS usb/tty
<6>usbcore: registered new interface driver garmin_gps
<6>garmin_gps: v0.33:garmin gps driver
<6>USB Serial support registered for hp4X
<6>usbcore: registered new interface driver hp4X
<6>hp4x: v1.00:HP4x (48/49) Generic Serial driver
<6>USB Serial support registered for PocketPC PDA
<6>usbcore: registered new interface driver ipaq
<6>ipaq: v1.0:USB PocketPC PDA driver
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0001,ca8b1d88,0004)
<7>s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
<6>USB Serial support registered for IPWireless converter
<6>usbcore: registered new interface driver ipwtty
<6>ipw: v0.4:IPWireless tty driver
<6>USB Serial support registered for IR Dongle
<6>usbcore: registered new interface driver ir-usb
<6>ir_usb: v0.5:USB IR Dongle driver
<6>USB Serial support registered for iuu_phoenix
<6>usbcore: registered new interface driver iuu_phoenix
<6>iuu_phoenix: v0.12:Infinity USB Unlimited Phoenix driver
<6>USB Serial support registered for Keyspan - (without firmware)
<6>USB Serial support registered for Keyspan 1 port adapter
<6>USB Serial support registered for Keyspan 2 port adapter
<6>USB Serial support registered for Keyspan 4 port adapter
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0x2301,0x0014,0x0001,ca8b1db8,0000)
<6>usb 1-1: new full speed USB device using s3c2410-ohci and address 2
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0x2303,0x0004,0x0001,ca8b1db8,0000)
<6>usbcore: registered new interface driver keyspan
<6>keyspan: v1.1.5:Keyspan USB to Serial Converter Driver
<6>USB Serial support registered for Keyspan PDA
<6>USB Serial support registered for Keyspan PDA - (prerenumeration)
<6>USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
<6>usbcore: registered new interface driver keyspan_pda
<6>keyspan_pda: v1.1:USB Keyspan PDA Converter driver
<6>USB Serial support registered for KL5KUSB105D / PalmConnect
<6>usbcore: registered new interface driver kl5kusb105d
<6>kl5kusb105: v0.4:KLSI KL5KUSB105 chipset USB->Serial Converter driver
<6>USB Serial support registered for KOBIL USB smart card terminal
<6>usbcore: registered new interface driver kobil
<6>kobil_sct: 21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental)
<6>USB Serial support registered for MCT U232
<6>usbcore: registered new interface driver mct_u232
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0001,ca8b1d88,0004)
<7>s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
<6>mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver
<6>USB Serial support registered for Moschip 2 port adapter
<6>mos7720: 2.1:Moschip USB Serial Driver
<6>usbcore: registered new interface driver moschip7720
<6>USB Serial support registered for Moschip 7840/7820 USB Serial Driver
<6>mos7840: 1.3.2:Moschip 7840/7820 USB Serial Driver
<6>usbcore: registered new interface driver mos7840
<6>USB Serial support registered for moto-modem
<6>usbcore: registered new interface driver moto-modem
<6>USB Serial support registered for navman
<6>usbcore: registered new interface driver navman
<6>USB Serial support registered for ZyXEL - omni.net lcd plus usb
<6>usbcore: registered new interface driver omninet
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0x2301,0x0014,0x0001,ca8b1db8,0000)
<6>omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
<6>USB Serial support registered for opticon
<6>usbcore: registered new interface driver opticon
<6>USB Serial support registered for oti6858
<6>usbcore: registered new interface driver oti6858
<6>USB Serial support registered for pl2303
<6>usbcore: registered new interface driver pl2303
<7>usb 1-1: ep0 maxpacket = 8
<6>pl2303: Prolific PL2303 USB to serial adaptor driver
<6>USB Serial support registered for qcaux
<6>usbcore: registered new interface driver qcaux
<6>USB Serial support registered for Qualcomm USB modem
<7>usb 1-1: default language 0x0409
<6>usbcore: registered new interface driver qcserial
<6>safe_serial: v0.1:USB Safe Encapsulated Serial
<6>USB Serial support registered for safe_serial
<7>usb 1-1: udev 2, busnum 1, minor = 1
<6>usb 1-1: New USB device found, idVendor=05e3, idProduct=0606
<6>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 1-1: Product: USB Hub 2.0
<7>usb 1-1: usb_probe_device
<7>usb 1-1: configuration #1 chosen from 1 choice
<7>usb 1-1: adding 1-1:1.0 (config #1, interface 0)
<6>usbcore: registered new interface driver safe_serial
<7>hub 1-1:1.0: usb_probe_interface
<7>hub 1-1:1.0: usb_probe_interface - got id
<6>hub 1-1:1.0: USB hub found
<6>USB Serial support registered for siemens_mpi
<6>usbcore: registered new interface driver siemens_mpi
<6>Driver for Siemens USB/MPI adapter
<6>hub 1-1:1.0: 4 ports detected
<7>hub 1-1:1.0: standalone hub
<7>hub 1-1:1.0: individual port power switching
<7>hub 1-1:1.0: individual port over-current protection
<7>hub 1-1:1.0: power on to power good time: 44ms
<6>Version 0.1 09/26/2005 Thomas Hergenhahn@web.de http://libnodave.sf.net
<6>USB Serial support registered for Sierra USB modem
<7>hub 1-1:1.0: local power source is good
<7>hub 1-1:1.0: enabling power on all ports
<6>usbcore: registered new interface driver sierra
<6>sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
<6>USB Serial support registered for SPCP8x5
<6>usbcore: registered new interface driver spcp8x5
<6>spcp8x5: v0.10:SPCP8x5 USB to serial adaptor driver
<6>USB Serial support registered for Quatech SSU-100 USB to Serial Driver
<7>drivers/usb/core/inode.c: creating file '002'
<7>hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0001,ca8b1e18,0004)
<6>usbcore: registered new interface driver ssu100
<6>ssu100: v0.1:Quatech SSU-100 USB to Serial Driver
<6>USB Serial support registered for symbol
<6>usbcore: registered new interface driver symbol
<6>USB Serial support registered for TI USB 3410 1 port adapter
<6>USB Serial support registered for TI USB 5052 2 port adapter
<6>usbcore: registered new interface driver ti_usb_3410_5052
<6>ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
<6>USB Serial support registered for Handspring Visor / Palm OS
<6>USB Serial support registered for Sony Clie 3.5
<6>USB Serial support registered for Sony Clie 5.0
<6>usbcore: registered new interface driver visor
<6>visor: USB HandSpring Visor / Palm OS driver
<6>USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
<6>USB Serial support registered for Connect Tech - WhiteHEAT
<6>usbcore: registered new interface driver whiteheat
<6>whiteheat: v2.0:USB ConnectTech WhiteHEAT driver
<6>USB Serial support registered for vivopay-serial
<6>usbcore: registered new interface driver vivopay-serial
<6>vivopay_serial: v1.0:ViVOpay USB Serial Driver
<6>USB Serial support registered for zio
<6>usbcore: registered new interface driver zio
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
<6>s3c-udc : version 15 March 2009 (DMA Mode)
<7>hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
<6>android init
<6>android_probe pdata: c06ccc40
<6>android_bind
<7>android_bind_config
<6>android_usb gadget: android_usb ready
<7>hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<7>s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0x2301,0x0010,0x0002,ca8b1e48,0000)
<7>hub 1-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<7>Registered gadget driver 'android_usb'
<6>f_adb init
<6>android_register_function adb
<6>f_mass_storage init
<6>fsg_probe pdev: c06cc860, pdata: c06ccbc8
<6>android_register_function usb_mass_storage
<6>android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>android_usb gadget: Number of LUNs=1
<6> lun0: LUN: removable file: (no medium)
<6>adb_bind_config
<4>mice: could not register psaux device, error: -16
<6>mice: PS/2 mouse device common for all mice
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<7>s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0x2301,0x0010,0x0002,ca8b1e48,0000)
<6>input: gpio-keys as /devices/platform/gpio-keys/input/input0
<6>S3C Touchscreen driver, (c) 2010 FriendlyARM
<6>touchscreen got loaded successfully : 12 bits
<4>touchscreen-1wire    initialized
<4>backlight-1wire    initialized
<6>input: TouchScreen Pipe as /devices/virtual/input/input1
<4>ts-if    initialized
<4>one_wire_status: 4
<4>S3C24XX RTC, (c) 2004,2006 Simtec Electronics
<6>s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
<6>using rtc device, s3c, for alarms
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<6>s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
<6>i2c /dev entries driver
<6>Linux video capture interface: v2.00
<6>usbcore: registered new interface driver usbvision
<6>USBVision USB Video Device Driver for Linux : 0.9.10
<6>usbcore: registered new interface driver pvrusb2
<6>pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner
<6>pvrusb2: Debug mask is 31 (0x1f)
<6>usbcore: registered new interface driver zr364xx
<6>zr364xx: Zoran 364xx
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<6>usbcore: registered new interface driver stkwebcam
<6>gspca: main v2.10.0 registered
<6>usbcore: registered new interface driver hdpvr
<4>one_wire_status: 4
<6>usbcore: registered new interface driver s2255
<6>s3c-fimc: controller 0 registered successfully
<6>s3c-fimc: controller 1 registered successfully
<4>FIMC Driver, 2010 ported by FriendlyARM http://www.arm9.net
<4>ov965x: probe
<3>s3c-fimc: i2c transfer error
<3>s3c-fimc: i2c transfer error
<3>s3c-fimc: i2c transfer error
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<3>s3c-fimc: i2c transfer error
<6>s3c-fimc: ov965x: Product ID fb:fb Manufacturer ID fb:fb
<4>parent clock for camera: 266.000 MHz, divisor: 11
<4>one_wire_status: 2
<4>[CAM]RESET CAM.
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<7>hub 1-0:1.0: debounce: port 2: total 125ms stable 100ms status 0x100
<7>hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<6>S3C PostProcessor Driver v3.12, (c) 2009 Samsung Electronics
<6>S3C6410 TV encoder Driver, (c) 2008 Samsung Electronics
<4> S3C6410 TV encoder Driver init OK.
<6>S3C6410 TV scaler Driver, (c) 2008 Samsung Electronics
<4> S3C6410 TV scaler Driver init OK.
<6>S3C JPEG Driver, (c) 2007 Samsung Electronics
<6>s3c-g2d: Driver loaded succesfully
<6>s3c-g2d: Module initialized.
<4>s3c_g3d: clock enabled
<6>s3c-g3d: detected FIMG-3DSE version 1.5.0
<6>s3c-g3d: Driver loaded succesfully
<6>s3c-g3d: Module initialized.
<6>usbcore: registered new interface driver uvcvideo
<6>USB Video Class driver (v0.1.0)
<6>Bluetooth: HCI UART driver ver 2.2
<6>Bluetooth: HCI H4 protocol initialized
<4>one_wire_status: 4
<6>Bluetooth: HCILL protocol initialized
<6>Bluetooth: Generic Bluetooth USB driver ver 0.6
<6>usbcore: registered new interface driver btusb
<6>sdhci: Secure Digital Host Controller Interface driver
<6>sdhci: Copyright(c) Pierre Ossman
<6>s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz)
<6>s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz)
<6>s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (24000000 Hz)
<4>one_wire_status: 2
<7>Registered led device: mmc0::
<6>mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
<6>s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133000000 Hz)
<6>s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133000000 Hz)
<6>s3c-sdhci s3c-sdhci.1: clock source 2: mmc_bus (24000000 Hz)
<4>one_wire_status: 4
<7>Registered led device: mmc1::
<6>mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
<6>s3c6400_setup_sdhci_cfg_card: CTRL 2=c0004120, 3=80808080
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>logger: created 64K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 64K log 'log_radio'
<6>logger: created 64K log 'log_system'
<6>asoc: AC97 HiFi <-> s3c-ac97 mapping ok
<6>s3c6400_setup_sdhci_cfg_card: CTRL 2=c0004100, 3=00008080
<6>mmc0: new high speed SD card at address b368
<6>mmcblk0: mmc0:b368 SMISD 1.85 GiB
<6> mmcblk0: p1
<6>s3c6400_setup_sdhci_cfg_card: CTRL 2=c0004120, 3=80808080
<6>ALSA device list:
<6>  #0: MINI6410 (WM9713)
<6>TCP cubic registered
<6>NET: Registered protocol family 17
<6>Bluetooth: L2CAP ver 2.15
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO (Voice Link) ver 0.6
<6>Bluetooth: SCO socket layer initialized
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM ver 1.11
<6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<4>one_wire_status: 2
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
<6>s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-24 07:32:24 UTC (948699144)
<6>Freeing init memory: 1396K
<4>qc test log V2: Hello Tiny6410~~
<5>UBIFS: recovery needed
<5>UBIFS: recovery completed
<5>UBIFS: mounted UBI device 0, volume 0, name "FriendlyARM-root"
<5>UBIFS: file system size:   2063351808 bytes (2014992 KiB, 1967 MiB, 1999 LEBs)
<5>UBIFS: journal size:       12517376 bytes (12224 KiB, 11 MiB, 13 LEBs)
<5>UBIFS: media format:       w4/r0 (latest is w4/r0)
<5>UBIFS: default compressor: lzo
<5>UBIFS: reserved for root:  0 bytes (0 KiB)
<4>one_wire_status: 2
<3>init: cannot open '/initlogo.rle'
<4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<6>enabling adb
<6>adb_open
<6>Compat-wireless backport release: compat-wireless-2011-06-28-2-FA
<6>Backport based on linux-next.git next-20110707
<6>cfg80211: Calling CRDA to update world regulatory domain
<6>eth0: link down
<6>eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
<6>libertas_sdio: Libertas SDIO driver
<6>libertas_sdio: Copyright Pierre Ossman
<6>warning: `dhcpcd' uses 32-bit capabilities (legacy support in use)
<6>usbcore: registered new interface driver ath9k_htc
<6>usbcore: registered new interface driver rt73usb
<6>usbcore: registered new interface driver rt2800usb
<4>
<4>rtw driver version=v3.0.1590.20110511
<6>usbcore: registered new interface driver rtl8192cu
<6>usbcore: registered new interface driver zd1211rw
<4>fa_cpu_pfn: module license 'Proprietary' taints kernel.
<4>Disabling lock debugging due to kernel taint
<4>FriendlyARM proprietary driver for mini6410 initialized.
<6>request_suspend_state: wakeup (3->0) at 57419776406 (2000-01-24 07:33:12.560719203 UTC)
<3>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
<7>hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<7>s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0x2301,0x0010,0x0002,ca8b1e48,0000)
<7>hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<7>hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0x2303,0x0004,0x0002,ca8b1db8,0000)
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1d88,0004)
<7>s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [1] = 0x00130100 PRSC PESC CSC PPS
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0x2301,0x0014,0x0002,ca8b1db8,0000)
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0x2301,0x0001,0x0002,ca8b1de0,0000)
<3>hub 1-0:1.0: unable to enumerate USB device on port 2
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0x2301,0x0001,0x0002,ca8b1e38,0000)
<7>hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<7>s3c2410-ohci s3c2410-ohci: GetStatus roothub.portstatus [1] = 0x00030100 PESC CSC PPS
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0x2301,0x0010,0x0002,ca8b1e48,0000)
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0x2301,0x0011,0x0002,ca8b1e48,0000)
<7>hub 1-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<4>s3c-udc: new address 3
<7>s3c2410-ohci s3c2410-ohci: s3c2410_hub_control(caafa400,0xa300,0x0000,0x0002,ca8b1e18,0004)
<7>hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
<6>android_usb gadget: high speed config #1: android