Concrete mixing station's electrical system the some wiring part of the installation, the installation process is as follows:
1. In the few days of installation before the installation work must understand the working process of the concrete mixing plant and the entire electrical system control mode and principle, and to understand the distribution of the electrical system and some of the key control elements;
2. Before in the arrangement of cables to carefully check the cable for damage;
3. Connection control lines and power lines, peripheral control first adopt a two-core cable, rubber cable power lines, electrical components intact to firmly fixed, welding can not fall off, corrosion;
4.To review the general plan and in accordance with the principle of electronically controlled electrical cabinets, console and motors, solenoid valves, etc., according to the wiring diagram of the electrical system of concrete mixing station connected;
5.Reliable access to zero or ground protection. According to the on-site power supply system, the installation site should have a good protection.
Installation Notes:
1. To do before installing the cable layout, make the appropriate path;
2 .To do mine-resistant measures;
3 .After the sensor mounted to be welded, the sensor with a copper shorting, close to the welding point of the welding ground, away from the sensor, to prevent the current generated when the welding destroyed sensors.
Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows: aggregate batching system, concrete batching plants, concrete mixer,blocking making machine,concrete pump,etc.来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/28610507/viewspace-764242/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/28610507/viewspace-764242/