---- 一、先解释一些要用到的数据常量和数据结构。
const RAS_MaxDeviceType = 16;//设备类型名称长度 RAS_MaxEntryName = 256;//连接名称最大长度 RAS_MaxDeviceName = 128;//设备名称最大长度 RAS_MaxIpAddress = 15;//IP地址的最大长度 RASP_Pppip = $8021;//拨号连接的协议类型,该数值表示PPP连接 type HRASCONN = Dword;//拨号连接句柄的类型 RASCONN = record//活动的拨号连接的句柄和设置信息 dwSize : DWORD;//该结构所占内存的大小(Bytes), 一般设置为SizeOf(RASCONN) hrasconn : HRASCONN;//活动连接的句柄 szEntryName : array[0..RAS_MaxEntryName] of char; //活动连接的名称 szDeviceType : array[0..RAS_MaxDeviceType] of char; //活动连接的所用的设备类型 szDeviceName : array[0..RAS_MaxDeviceName] of char; //活动连接的所用的设备名称 end; TRASPPPIP = record//活动的拨号连接的动态IP地址信息 dwSize : DWORD;//该结构所占内存的大小(Bytes), 一般设置为SizeOf(TRASPPPIP) dwError : DWORD;//错误类型标识符 szIpAddress : array[ 0..RAS_MaxIpAddress ] of char; //活动的拨号连接的IP地址 end;
---- 二、接着要解释要用到的两个RAS函数。
//获取所有活动的拨号连接的信息(连接句柄和设置信息) function RasEnumConnections( var lprasconn : RASCONN ; //接收活动连接的缓冲区的指针 var lpcb: DWORD;//缓冲区大小 var lpcConnections : DWORD//实际的活动连接数 ) : DWORD; stdcall; function RasEnumConnections;external 'Rasapi32.dll' name 'RasEnumConnectionsA'; //获取指定活动的拨号连接的动态IP信息 function RasGetProjectionInfo( hrasconn : HRasConn;//指定活动连接的句柄 rasprojection : DWORD;//RAS连接类型 var lpprojection : TRASPPPIP;//接收动态IP信息的缓冲区 var lpcb : DWord//接收缓冲区的大小 ) : DWORD;stdcall; function RasGetProjectionInfo;external 'Rasapi32.dll' name 'RasGetProjectionInfoA';
这两个函数的返回值为0时表示执行成功,非0表示错误代码。
---- 三、下面要讨论如何用上面的两个RAS函数获取拨号连接的动态IP地址
---- 首先,要用函数RasEnumConnections列出已建立的活动拨号连接的信息,其中包括连接名称、连接句柄、连接设备类型和设备名称;然后根据连接句柄用函数RasGetProjectionInfo获取连接对应的一个TRASPPPIP结构,其中包括一个成员属性szIpAddress即为动态IP地址。具体请参见以下程序片段和注释信息。
procedure TForm1.Button1Click(Sender: Tobject); const MaxConnections = 10;//假设最多有10个活动的拨号连接 var connections : array[0..MaxConnections-1] of RASCONN; //拨号连接数组 longSize : dword; intAvailabelConnections : dword; //活动的拨号连接的实际数目 intIndex : integer; strTemp : string; dwResult : DWORD; dwSize : DWORD; RASpppIP : TRASPPPIP; //活动的拨号连接的动态IP地址信息 begin connections[ 0 ].dwSize := sizeof(RASCONN); longSize := MaxConnections * connections[ 0 ].dwSize; //接收活动连接的缓冲区大小 intAvailabelConnections := 0; //获取所有活动的拨号连接的信息(连接句柄和设置信息) dwResult := RasEnumConnections( connections[ 0 ], longSize,intAvailabelConnections ); if 0 < > dwResult then memo1.lines.add( '错误:' + inttostr( dwResult ) ) else begin memo1.lines.add( '现有的活动连接有' + IntToStr( intAvailabelConnections ) + '个'); //显示所有活动的拨号连接的信息(设置信息和动态IP地址) for intIndex := 0 to intAvailabelConnections - 1 do begin //显示一个活动的拨号连接的设置信息 strTemp := '连接名称:' + StrPAS( connections[ intIndex ].szEntryName ) + ',设备类型:' + StrPAS( connections[ intIndex ].szDeviceType ) + ',设备名称:' + StrPAS( connections[ intIndex ].szDeviceName ); memo1.lines.add( strTemp ); //显示一个活动的拨号连接的动态IP地址 dwSize := SizeOf(RASpppIP); RASpppIP.dwSize := dwSize; dwResult := RASGetProjectionInfo ( connections[ intIndex ].hRasConn, RASP_PppIp,RasPPPIP,dwSize);//获取动态IP地址 if 0 < > dwResult then memo1.lines.add( '错误:' + inttostr( dwResult )) else memo1.lines.add( '动态地址:' + StrPas(RASpppIP.szIPAddress)); end; end; end;
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/10752019/viewspace-985671/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/10752019/viewspace-985671/