由于管理员的策略 ,该磁盘处于脱机状态

o pen a command prompt and type “ diskpart.exe ”.

You will now receive a diskpart-prompt:
Diskpart>

Now type “ san ”. This will provide you with the current configured SAN policy:

SAN Policy : Offline Shared


In the diskpart-prompt, type “ san policy=OnlineAll ”.
This will result in the following message:
Diskpart successfully changed the SAN policy for the current operating system.

Now type “ list disk ”, which will give this message:
Disk ### Status Size Free Dyn Gpt
Disk 0 Online 30 GB 0 B
Disk 1 Offline 50 GB 1024 KB

In my case, disk 1 was offline so I typed “ select disk 1 ” which provided:
Disk 1 is now the selected disk

Now type “ attributes disk clear readonly ”.
Disk attributes cleared successfully.
And to check if all the settings are now correct, type “ attributes disk ”.
This will give an output something like:
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No

After the last check has been successful, type “ online disk ” to bring the disk online.

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/27042095/viewspace-775354/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/27042095/viewspace-775354/