树莓派3上编译运行UEFI

安装依赖软件：
sudo apt-get install iasl uuid-dev acpica-tools
首先下载相关代码仓：

git clone https://git.linaro.org/uefi/uefi-tools.git
git clone https://github.com/tianocore/edk2.git
git submodule update --init
git clone https://github.com/tianocore/edk2-non-osi.git
git clone https://github.com/tianocore/edk2-platforms.git
git clone https://github.com/ARM-software/arm-trusted-firmware.git

开始编译：

./uefi-tools/edk2-build.sh --arm-tf-dir arm-trusted-firmware --edk2-dir edk2 -b DEBUG rpi3

最后生成镜像：

Fd File Name:RPI_EFI (/home/jun/uefi/Build/RPi3/DEBUG_GCC5/FV/RPI_EFI.fd)

Generate Region at Offset 0x0
   Region Size = 0x10000
   Region File Name = /home/jun/uefi/edk2-non-osi/Platform/RaspberryPi/RPi3/TrustedFirmware/bl1.bin

Generate Region at Offset 0x10000
   Region Size = 0x10000
   Region Name = DATA

Generate Region at Offset 0x20000
   Region Size = 0x10000
   Region File Name = /home/jun/uefi/edk2-non-osi/Platform/RaspberryPi/RPi3/TrustedFirmware/fip.bin

Generate Region at Offset 0x30000
   Region Size = 0x1B0000
   Region Name = FV

Generating FVMAIN_COMPACT FV

Generating FVMAIN FV

Generate Region at Offset 0x1E0000
   Region Size = 0xE000
   Region Name = DATA

Generate Region at Offset 0x1EE000
   Region Size = 0x1000
   Region Name = None

Generate Region at Offset 0x1EF000
   Region Size = 0x1000
   Region Name = DATA

Generate Region at Offset 0x1F0000
   Region Size = 0x10000
   Region Name = None

GUID cross reference file can be found at /home/jun/uefi/Build/RPi3/DEBUG_GCC5/FV/Guid.xref

FV Space Information
FVMAIN [99%Full] 6846080 total, 6846040 used, 40 free
FVMAIN_COMPACT [56%Full] 1769472 total, 1002848 used, 766624 free

- Done -
Build end time: 06:40:43, Sep.01 2019
Build total time: 00:00:12

Platform 'rpi3' is not configured to build ARM Trusted Firmware.
------------------------------------------------------------
                         Raspberry Pi 3 (AARCH64) DEBUG pass
------------------------------------------------------------
pass    1
fail    0

将https://github.com/raspberrypi/firmware/tree/master/boot目录里面的下面三个拷贝到FAT32格式sd卡里面

• bootcode.bin
• fixup.dat
• start.elf
  最后将后上面编译生成的RPI_EFI.fd拷贝到sd卡里面，在sd卡里面创建config.txt，内容如下：

arm_64bit

bootcode_delay=3
boot_delay=3
boot_delay_ms=0

start_file=start.elf
fixup_file=fixup.dat

dtdebug=1
enable_uart=1

arm_control=0x200
armstub=RPI_EFI.fd
disable_commandline_tags=1