hyper-v 安装linux后,需要安装linux集成服务包和鼠标驱动包。具体安装方法和下载地址如下:
1。 linux集成服务包
必要條件就是要先在linux 虚拟机上安裝好gcc及Kernel-devel
拷贝iso中的内容到某个目录下,运行:
make
make install
reboot
2. 鼠标linux驱动包
http://www.xen.org/download/satori.html
To install the InputVSC driver: (you must be root:)
1. Download and attach the .ISO file to a Hyper-V guest with the Linux Integration Components already installed.
2. Copy the contents of the .ISO to the desired directory
3. Run setup.pl with the inputdriver argument:
# ./setup.pl inputdriver
安装报错,根据报错信息建立相应的文件夹,如果缺少文件,可以直接在包中找到。并将其复制到要求的文件夹即可。
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/24751738/viewspace-709094/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/24751738/viewspace-709094/