【Mysql】安装tokudb引擎

平台支持：

    TokuDB 只能在 64-bit Linux 下使用.
最小内存要求：
    TokuDB 需要至少1GB 的物理内存,当然这里建议最好是 2GB 

安装tokuDB   

      tokuDB内存分配需要jemalloc支持（一般安装percona mysql以后自己就有，如果没有则需要额外安装）    

    

 1 安装jemalloc

1.          yum install jemalloc
        编译安装参考：http://blog.itpub.net/29096438/viewspace-2122906/

    

 2：安装tokudb

1. 二进制包安装：
2. 下载：
3. [root@host-192-168-1-56 plugin]# wget https://www.percona.com/downloads/Percona-Server-5.6/Percona-Server-5.6.24-72.2/binary/tarball/Percona-Server-5.6.24-rel72.2-TokuDB.Linux.x86_64.ssl101.tar.gz

解压拷贝tokudb.so至mysql plugin目录即可
[root@host-192-168-1-56 plugin]# cp ha_tokudb.so /home/data/mysql/lib/plugin/

修改内核配置，禁用transparent_hugepage，不关闭的话可能会导致TokuDB内存泄露（建议写到 /etc/rc.local 中，重启后仍可生效）：
echo never > /sys/kernel/mm/redhat_transparent_hugepage/defrag
echo never > /sys/kernel/mm/redhat_transparent_hugepage/enabled
echo never > /sys/kernel/mm/transparent_hugepage/enabled
echo never > /sys/kernel/mm/transparent_hugepage/defrag

安装即可
mysql> INSTALL PLUGIN tokudb_file_map SONAME 'ha_tokudb.so';
Query OK, 0 rows affected (0.07 sec)


mysql> INSTALL PLUGIN tokudb_fractal_tree_info SONAME 'ha_tokudb.so';
Query OK, 0 rows affected (0.00 sec)


mysql> INSTALL PLUGIN tokudb_fractal_tree_block_map SONAME 'ha_tokudb.so';
Query OK, 0 rows affected (0.00 sec)


mysql> INSTALL PLUGIN tokudb_trx SONAME 'ha_tokudb.so';
Query OK, 0 rows affected (0.00 sec)


mysql> INSTALL PLUGIN tokudb_locks SONAME 'ha_tokudb.so';
Query OK, 0 rows affected (0.00 sec)


mysql> INSTALL PLUGIN tokudb_lock_waits SONAME 'ha_tokudb.so';
Query OK, 0 rows affected (0.00 sec)


mysql> INSTALL PLUGIN tokudb SONAME 'ha_tokudb.so';
Query OK, 0 rows affected (0.38 sec)


mysql> show engines;
+--------------------+---------+----------------------------------------------------------------+--------------+------+------------+
| Engine             | Support | Comment                                                        | Transactions | XA   | Savepoints |
+--------------------+---------+----------------------------------------------------------------+--------------+------+------------+
| MRG_MYISAM         | YES     | Collection of identical MyISAM tables                          | NO           | NO   | NO         |
| CSV                | YES     | CSV storage engine                                             | NO           | NO   | NO         |
| MyISAM             | YES     | MyISAM storage engine                                          | NO           | NO   | NO         |
| BLACKHOLE          | YES     | /dev/null storage engine (anything you write to it disappears) | NO           | NO   | NO         |
| MEMORY             | YES     | Hash based, stored in memory, useful for temporary tables      | NO           | NO   | NO         |
| TokuDB             | YES     | Tokutek TokuDB Storage Engine with Fractal Tree(tm) Technology | YES          | YES  | YES        |
| FEDERATED          | NO      | Federated MySQL storage engine                                 | NULL         | NULL | NULL       |
| ARCHIVE            | YES     | Archive storage engine                                         | NO           | NO   | NO         |
| InnoDB             | DEFAULT | Supports transactions, row-level locking, and foreign keys     | YES          | YES  | YES        |
| PERFORMANCE_SCHEMA | YES     | Performance Schema                                             | NO           | NO   | NO         |
+--------------------+---------+----------------------------------------------------------------+--------------+------+------------+
10 rows in set (0.04 sec)

4 配置文件tokudb参数设置

1. [mysqld_safe]
   malloc-lib=/usr/local/mysql/lib/libjemalloc.so
   plugin-dir =/usr/local/mysql/lib/mysql/plugin/
   
   
2. #tokudb
3. #把TokuDB datadir以及logdir和MySQL的datadir分开，美观点，也可以不分开，注释掉本行以及下面2行即可
   
4. tokudb-data-dir = /data/mysql/zabbix_3306/tokudbData
   
5. tokudb-log-dir = /data/mysql/zabbix_3306/tokudbLog
   
6.  
   
7. #TokuDB的行模式，建议用 FAST 就足够了，如果磁盘空间很紧张，建议用 SMALL
   
8. #tokudb_row_format = tokudb_small
   
9. tokudb_row_format = tokudb_fast
   
10. tokudb_cache_size = 44G
    
11.  
    
12. #其他大部分配置其实可以不用修改的，只需要几个关键配置即可
    
13. tokudb_commit_sync = 0
    
14. tokudb_directio = 1
    
15. tokudb_read_block_size = 128K
    
16. tokudb_read_buf_size = 128K

若将上述参数写在[mysqld]下，则show engines中tokudb引擎不存在了了，失效了
若将上述参数写在[mysqld_safe]下，tokudb引擎还存在，也能建立tokudb表，但是这些参数配置是没生效的。。。。。。。待解决

注意：

1. mysql版本：mysql官方社区版5.6.24 搭建成功后 新建表就重启，建标就重启
2. 
   
   1. 错误日志：遇到了bug？
   2. Version: '5.6.24-log'  socket: '/home/data/mydata/3308/mysql.sock'  port: 3308  Source distribution
      08:44:47 UTC - mysqld got signal 11 ;
      This could be because you hit a bug. It is also possible that this binary
      or one of the libraries it was linked against is corrupt, improperly built,
      or misconfigured. This error can also be caused by malfunctioning hardware.
      We will try our best to scrape up some info that will hopefully help
      diagnose the problem, but since we have already crashed, 
      something is definitely wrong and this may fail.
      
      
      key_buffer_size=8388608
      read_buffer_size=131072
      max_used_connections=1
      max_threads=8096
      thread_count=1
      connection_count=1
      It is possible that mysqld could use up to 
      key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 3220280 K  bytes of memory
      Hope that's ok; if not, decrease some variables in the equation.
      
      
      
3. 
   解决办法：换成percona server 

社区版5.6.24得以解决

参考：
http://blog.csdn.net/mr__fang/article/details/41121245
http://imysql.cn/tag/tokudb
http://www.tuicool.com/articles/ei2QJbe

   

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/29096438/viewspace-2122921/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/29096438/viewspace-2122921/