版本12.5.2,分页取数据的sql怎么写?
取第11条到第20条的记录:
象mysql一样,select * from table where c1='a' start 11 limit 10
set rowcount 20
-- get 20 rows
-- discard the first 10 rows
set rowcount 0
您可以使用 FIRST 或 TOP 关键字限制查询的结果集中包括的行数。这些关键字用于包括 ORDER BY 子句的查询。
示例
以下查询返回在按姓氏对雇员进行排序时首先出现的雇员的信息:
SELECT FIRST *
FROM employee
ORDER BY emp_lname
以下查询返回按姓氏排序时出现的前五个雇员:
SELECT TOP 5 *
FROM employee
ORDER BY emp_lname
在使用 TOP 时,您也可以使用 START AT 来提供偏移。以下语句列出按姓氏以降序进行排序时出现的第五个和第六个雇员:
SELECT TOP 2 START AT 5 *
FROM employee
ORDER BY emp_lname DESC
FIRST 和 TOP 只能与 ORDER BY 子句联合使用,以确保获得一致的结果。如果使用 FIRST 或 TOP 时没有 ORDER BY,则会触发语法警告,并且很可能产生无法预知的结果。
注意
'start at' 值必须大于 0。当 'top' 为常量时,其值必须大于 0;当 'top' 为变量时,其值必须大于或等于 0。
SYBASE 不提供这种方式的提取,除非自己写一个游标
top 语句不行啊
1> select top 10 * from tblStudentCode order by Code
2> go
Msg 102, Level 15, State 1:
Server 'DBSVR', Line 1:
Incorrect syntax near '10'.
top语句在12.5.3之后才支持,实际上使用set rowcount n是个不错的选择
top在ASE 15可以支持,但不知道start at支不支持?
一段很好的分页程序,速度很快,sybase内部员工写的,改成自己需要的SQL吧。
create procedure test_p @ipage int, @num int as /* @ipage 页码, @num 每页的记录数 */
begin
declare @maxpages int, @rcount int /* @maxpages 最大页码 */
if @ipage>=100
select @maxpages=ceiling(count(*)/@num) from test
else
select @maxpages=100000
if @ipage<=@maxpages/2
begin
select @rcount=@ipage*@num
set rowcount @rcount
select id=identity(12),name,descs,ddd into #temptable1 from test order by id
select * from #temptable1 where id>=(@ipage-1)*@num and id<= @ipage*@num
end else
begin
select @rcount=(@maxpages-@ipage+1)*@num
set rowcount @rcount
select id=identity(12),name,descs,ddd into #temptable2 from test order by id desc
select id,name, ddd,descs from #temptable2 where id>=(@maxpages-@ipage)*@num and id<= (@maxpages-@ipage+1)*@num order by id desc
end
end
好事做到底,送个通用版吧
create procedure splitpage @qry varchar(16384),@ipage int, @num int as /*@qry SQL语句, @ipage 页数, @num 每页记录条数 */
begin
declare @maxpages int
declare @rcount int
declare @execsql varchar(16384)
if @ipage>=100
select @maxpages=ceiling(count(*)/@num) from test
else
select @maxpages=100000
if @ipage<=@maxpages/2
begin
select @rcount=@ipage*@num
set rowcount @rcount
set @execsql = stuff(@qry,charindex('select',@qry),6,'select sybid=identity(12),')
set @execsql = stuff(@execsql, charindex('from',@execsql),4,'into #temptable1 from')
set @execsql = @execsql || ' select * from #temptable1 where sybid>' || convert(varchar,(@ipage-1)*@num) || ' and sybid <= ' || convert(varchar,@ipage*@num)
execute (@execsql)
end else
begin
select @rcount=(@maxpages-@ipage+1)*@num
set rowcount @rcount
set @execsql = stuff(@qry,charindex('select',@qry),6,'select sybid=identity(12),')
set @execsql = stuff(@execsql, charindex('from',@execsql),4,'into #temptable1 from')
set @execsql = @execsql || ' order by sybid desc'
set @execsql = @execsql || ' select * from #temptable1 where sybid > ' || convert(varchar,(@maxpages-@ipage)*@num) || ' and sybid <= ' || convert(varchar,(@maxpages-@ipage+1)*@num)
execute (@execsql)
end
end
>select id=identity(12),name,descs,ddd into #temptable1 from test order by id
>select * from #temptable1 where id>=(@ipage-1)*@num and id<= @ipage*@num
我在项目中也是使用这个模式的,问题是写临时表时是否会发生物理写操作?如果发生,还有没有不需要写临时表的方案?
vc00, sybase中的临时表当用select into #table的形式时,是不记录日志的。速度非常快。
这点和oracle不同。算是sybase的一个feature.
ncowboy ,老程序在处理10万页以上结果集会出现问题。用select @maxpages=ceiling(count(*)/@num) from test此处使用是不对的。
由于即席查询时获取maxpages效率不高,对此作以下修改:可以由用户指定最大查询页数,缺省定为5000
create procedure splitpage @qry varchar(16384),@ipage int, @num int,@maxpages int = 5000 as
/*@qry SQL语句, @ipage 页数, @num 每页记录条数, @maxpages 最大查询页数 */
begin
declare @rcount int
declare @execsql varchar(16384)
if @ipage > @maxpages
begin
select '输入页数[' || convert(varchar,@ipage) || ']大于最大查询页数[' || convert (varchar,@maxpages) ||']'
return
end
select @rcount=@ipage*@num
set rowcount @rcount
set @execsql = stuff(@qry,charindex('select',@qry),6,'select sybid=identity(12),')
set @execsql = stuff(@execsql, charindex('from',@execsql),4,'into #temptable1 from')
set @execsql = @execsql || ' select * from #temptable1 where sybid>' || convert(varchar,(@ipage-1)*@num) || ' and sybid <= ' || convert(varchar,@ipage*@num)
execute (@execsql)
end
由于无法精确且高效取出即席查询结果集的总页数,原程序中考虑后几页查询的优化算法就无法使用了。
如果可以先算出精确的总页数,然后作为参数传给splitpage,那么也可以把查询后几页的算法再补上。
谁有更好的办法也可以提出来大家一起把这个分页存储过程优化到底。
版本更新:1.0.2
注意程序最后要加上set rowcount 0
create procedure splitpage @qry varchar(16384),@ipage int, @num int,@maxpages int = 5000 as
/*@qry SQL语句, @ipage 页数, @num 每页记录条数, @maxpages 最大查询页数 */
begin
declare @rcount int
declare @execsql varchar(16384)
if @ipage > @maxpages
begin
select '输入页数[' || convert(varchar,@ipage) || ']大于最大查询页数[' || convert (varchar,@maxpages) ||']'
return
end
select @rcount=@ipage*@num
set rowcount @rcount
set @execsql = stuff(@qry,charindex('select',@qry),6,'select sybid=identity(12),')
set @execsql = stuff(@execsql, charindex('from',@execsql),4,'into #temptable1 from')
set @execsql = @execsql || ' select * from #temptable1 where sybid>' || convert(varchar,(@ipage-1)*@num) || ' and sybid <= ' || convert(varchar,@ipage*@num)
execute (@execsql)
set rowcount 0
end
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/106285/viewspace-883679/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/106285/viewspace-883679/