建立 grid 的时候 第二个节点裸设备未显示

在创建裸设备的时候出错

在节点二的时候显示磁盘分区

不显示裸设备名称 

[root@rac2 ~]# fdisk -l
Disk /dev/sda: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          64      514048+  83  Linux
/dev/sda2              65       13054   104342175   8e  Linux LVM

Disk /dev/sdb: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1        1305    10482381   83  Linux

可以查看到的磁盘分区

[root@rac2 ~]# ls -lat /dev/sd*;
brw-r----- 1 root disk 8,  1 May 30 16:24 /dev/sda1
brw-r----- 1 root disk 8,  0 May 30 16:24 /dev/sda
brw-r----- 1 root disk 8,  2 May 30 16:24 /dev/sda2
brw-r----- 1 root disk 8, 16 May 30 16:24 /dev/sdb

此时查看 60-raw.rules 文件

[root@rac2 ~]# cat /etc/udev/rules.d/60-raw.rules
# Enter raw device bindings here.
#
# An example would be:
#   ACTION=="add", KERNEL=="sda", RUN+="/bin/raw /dev/raw/raw1 %N"
# to bind /dev/raw/raw1 to /dev/sda, or
#   ACTION=="add", ENV{MAJOR}=="8", ENV{MINOR}=="1", RUN+="/bin/raw /dev/raw/raw2 %M %m"
# to bind /dev/raw/raw2 to the device with major 8, minor 1.

ACTION=="add",KERNEL=="sdb1",RUN+="/bin/raw /dev/raw/raw1 %N"
KERNEL=="raw1",OWNER="grid",GROUP="asmadmin",MODE="0660"

检查后没有问题 

再次执行  start_udev

[root@rac2 ~]# start_udev
Starting udev:                                             [  OK  ]

[root@rac2 ~]# raw -qa

没有反馈 

此时是不是 内存里还没有刷新呢？

此时我就刷新了内存

[ root@rac2 ~]# partprobe

再次查看

[root@rac2 ~]# raw -qa

/dev/raw/raw1:  bound to major 8, minor 17

完毕

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/30176559/viewspace-1679222/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/30176559/viewspace-1679222/