本文的所有权归HP福州的张工程师,未经其允许不得用于其他用途,转载请注明,尊重他人劳动成果,谢谢!
第二章 访问MP
可以通过MP serial port 或者MP LAN port 登陆MP,默认的用户名/口令为:Admin/Admin
登陆过程:
*************************************************************************
This is a private system.
Do not attempt to login unless you are an authorized user.
Any authorized or unauthorized access or use may be monitored and can
result in criminal or civil prosecution under applicable law.
*************************************************************************
*************************************************************************
Only default users are configured.
Use one of the following user/password pairs to login:
Admin/Admin
Oper/Oper
*************************************************************************
MP login: Admin
MP password: *****
Hewlett-Packard Integrated Lights-Out HP Integrity and HP 9000
(c) Copyright Hewlett-Packard Company 1999-2004. All Rights Reserved.
MP Host Name: mp-rx2620
Revision E.03.15
*************************************************************************
MP ACCESS IS NOT SECURE
Default MP users are currently configured and remote access is enabled.
Modify default users passwords or delete default users (see UC command)
OR
Disable all types of remote access (see SA command)
*************************************************************************
*************************************************************************
Your Certificate is expired.
Use the SO command to generate a new certificate.
*************************************************************************
MP MAIN MENU:
CO: Console
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Log
SL: Show Event Logs
CSP: Connect to Service Processor
SE: Enter OS Session
HE: Main Help Menu
X: Exit Connection
2.1 serial port
使用任意终端仿真软件通过主机专用的串口线连接,具体设置为
2.2 MP LAN port
通过网线连接,直接telnet MP LAN port 的IP 地址
第三章 常用命令
注意:MP里的一些命令将对正在运行的系统造成破坏性影响,请不要随意操作,必须在响应中心工程
师指导下进行。
Command Description
BO Boot a partition
DATE Set the time and date
DF Display FRU Information of an entity
MA Return to Main Menu
PE Power entities on or off
PWRGRD Allows user to configure the power grid
RE Reset entity
RR Reset partition for reconfiguration
RS Reset a partition
SYSREV Returns all system revisions
TC Send a TOC signal to a partition
TE Broadcast a message to all users of the MP command handler
WHO Display list of MP connected users
LOC Display and Set Locator LED status
CP Display partition cell assignments
DE Display entity status
DU Display devices on bus
HE Display the list of available commands
LS Display LAN connected console status
PS Display detailed power and hardware configuration status
CA Only displays local rs232 parameters
CC Initiate a Complex Configuration
UPS Set parameters for ups monitoring via SNMP
SNMP Set SNMP daemon parameters
CP Display partition cell assignments
DC Reset parameters to default configuration
DI Disconnect Remote or LAN console
ID Change certain stable complex configuration profile fields
IF Display network interface information
IT Modify command interface inactivity time-out
LC Configure LAN connections
LS Display LAN connected console status
PARPERM Enable/Disable Interpartition Security
PD Modify default Partition for this login session
RL Re-key complex profile lock
RU Reset MP bus device
SA Display and set MP remote access
SO Configure security options and access control
XD MP Diagnostic and reboot
[@more@]来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/7507082/viewspace-1010655/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/7507082/viewspace-1010655/