android版vlc支持rtsp

一、编译live555
修改~/code/vlc-android/extras/contrib 下的distro.mak 增加.live

all: .zlib \

.a52 .mpeg2 .mad .ogg .vorbis .vorbisenc .theora \

.flac .speex .faad .lame .ffmpeg \

.twolame \

.png .dvbpsi \

.dca .kate .live

终端执行如下命令:
cd vlc-android/extras/contrib/
export ANDROID_NDK=/usr/local/android-ndk-r5b
./bootstrap -t arm-eabi -d android
make
此时会在~/code/vlc-android/extras/contrib/build-src下载live555的源码,在live文件夹,此时编译是不能通过的

修改/home/administrator/code/vlc-android/extras/contrib/build-src/live/makefile.tail

注视掉cd $(TESTPROGS_DIR) ; $(MAKE) cd $(MEDIA_SERVER_DIR) ; $(MAKE) cd $(TESTPROGS_DIR) ; $(MAKE) clean

cd $(MEDIA_SERVER_DIR) ; $(MAKE) clean

如下所示:

all:
cd $(LIVEMEDIA_DIR) ; $(MAKE)
cd $(GROUPSOCK_DIR) ; $(MAKE)
cd $(USAGE_ENVIRONMENT_DIR) ; $(MAKE)
cd $(BASIC_USAGE_ENVIRONMENT_DIR) ; $(MAKE)
#cd $(TESTPROGS_DIR) ; $(MAKE)
#cd $(MEDIA_SERVER_DIR) ; $(MAKE)

clean:
cd $(LIVEMEDIA_DIR) ; $(MAKE) clean
cd $(GROUPSOCK_DIR) ; $(MAKE) clean
cd $(USAGE_ENVIRONMENT_DIR) ; $(MAKE) clean
cd $(BASIC_USAGE_ENVIRONMENT_DIR) ; $(MAKE) clean
#cd $(TESTPROGS_DIR) ; $(MAKE) clean
#cd $(MEDIA_SERVER_DIR) ; $(MAKE) clean

在~/code/vlc-android/extras/contrib/build-src/live/liveMedia/Makefile.head增加  -I/home/administrator/android-ndk-r5b/platforms/android-9/arch-arm/usr/include
如下所示:
INCLUDES = -Iinclude -I../UsageEnvironment/include -I../groupsock/include -I/home/administrator/android-ndk-r5b/platforms/android-9/arch-arm/usr/include
其他目录下的Makefile.head也要增加头文件路径,如groupsock     UsageEnvironment BasicUsageEnvironment  mediaServer testProgs目录的Makefile.head,方法同上
修改groupsock 目录下GroupsockHelper.cpp的socketJoinGroupSSM   socketLeaveGroupSSM函数
将
imr.imr_multiaddr.s_addr = groupAddress;
imr.imr_sourceaddr.s_addr = sourceFilterAddr;
imr.imr_interface.s_addr = ReceivingInterfaceAddr;
改为
imr.imr_multiaddr = groupAddress;
imr.imr_sourceaddr= sourceFilterAddr;
imr.imr_interface = ReceivingInterfaceAddr;
如下所示:
Boolean socketJoinGroupSSM (UsageEnvironment& env, int socket,
netAddressBits groupAddress,
netAddressBits sourceFilterAddr) {
if (!IsMulticastAddress(groupAddress)) return True; // ignore this case

struct ip_mreq_source imr;
imr.imr_multiaddr = groupAddress;
imr.imr_sourceaddr = sourceFilterAddr;
imr.imr_interface = ReceivingInterfaceAddr;
if (setsockopt(socket, IPPROTO_IP, IP_ADD_SOURCE_MEMBERSHIP,
(const char*)&imr, sizeof (struct ip_mreq_source)) < 0) {
socketErr(env, "setsockopt(IP_ADD_SOURCE_MEMBERSHIP) error: ");
return False;
}

return True;
}

Boolean socketLeaveGroupSSM(UsageEnvironment& /*env*/, int socket,
netAddressBits groupAddress,
netAddressBits sourceFilterAddr) {
if (!IsMulticastAddress(groupAddress)) return True; // ignore this case

struct ip_mreq_source imr;
imr.imr_multiaddr = groupAddress;
imr.imr_sourceaddr = sourceFilterAddr;
imr.imr_interface = ReceivingInterfaceAddr;
if (setsockopt(socket, IPPROTO_IP, IP_DROP_SOURCE_MEMBERSHIP,
(const char*)&imr, sizeof (struct ip_mreq_source)) < 0) {
return False;
}

打开live/liveMedia/include/RTSPClient.hh
//#ifdef RTSPCLIENT_SYNCHRONOUS_INTERFACE 注释掉这个宏改为#if 1

#if 1
打开live/liveMedia/RTSPClient.cpp

//#ifdef RTSPCLIENT_SYNCHRONOUS_INTERFACE 注释掉这个宏改为#if 1
#if 1
修改 contrib/build-src/live/config.armlinux(CROSS_COMPILE改为arm-linux-androideabi-,COMPILE_OPTS 最后增加
DLOCALE_NOT_USED)
CROSS_COMPILE?= arm-linux-androideabi
COMPILE_OPTS = $(INCLUDES) -I. -O2 -DSOCKLEN_T=socklen_t -DNO_SSTREAM=1 -D_LARGEFILE_SOURCE=1

-D_FILE_OFFSET_BITS=64 -DLOCALE_NOT_USED

然后到vlc-android/extras/contrib/执行make live555的库就编出来了

二、编译live555的插件
修改/vlc-android/modules/demux/live555.cpp 注释掉#include <iostream>
在modules/demux/Makefile里找到arm-eabi/lib的字符串，加上
-lliveMedia -lUsageEnvironment -lBasicUsageEnvironment -lgroupsock
configure.sh文件中加上
--enable-live555 \
--with-live555-tree=vlc-android/extras/contrib/build-src/live \（根据自己的目录修改）
--enable-rtsp \