The Main Grinding Machine--Raymond Mill

Raymond mill (Raymond roller mill) is applicable to the grinding and processing of more than 280 kinds of non-flammable and non-explosive
materials with hardness less than 7 and humidity less than 6% in mining, construction, chemical industry and metallurgy, such as barite, calcite,
feldspar, talcum, marble, limestone, clay, glass. The fineness of the finished product can be adjusted from 100 meshes to 325 meshes according to
requirements. It is the main and widely used grinding machine.

After many years of practice and improvement, its structure is getting perfect day by day. For low consumption, low investment, environment
friendly , small occupation area, and more efficient than the traditional mill, it is widely used in the field of metallurgy, building materials,
chemical industry and mining to process powder. The series is used in grinding the non-flammable and non-explosive stuff which has the Moh’s
hardness below 7, humidity less than 6%, such as gypsum, talc, calcite, limestone, marble, feldspar, barite, dolomite, granite, kaolin, bentonite,
bauxite, iron ore etc., the final products change from 613 micron to 44 micron. Through the function of separator and blower, it can meet
different customers’ demand.

Structure of Raymond mill
1. The whole plant is a vertical structure of strong systematic characteristic, so it occupies small area. It is an independent production system
from crushing of raw material to grinding and packing.
2. Compared with other milling plants, its passing ratio achieves 99%, this is what other mill cannot reach.
3. Driving system of main frame. adopts airtight gearing and pulley, drives smoothly and operates reliably.
4. Main parts of the whole plant are made from cast and steel of high quality. The techniques is so subtly that insures the durability of whole
plant.
5. The electric control system is centralized controlled, so the automaticity is high, no people are needed in the operating room.

Raymond mill Maintenance and Repair:
1. Operate the equipment have to be technically trained to know the principle and rules of operation. Someone should be specially selected and put
in charge of the operation.
2. To ensure normal operation of the equipment, a manual containing strict rules and procedures for its operation, maintenance and repair should
be well prepared and followed. Tools, replacement parts for maintaining, repairing and lubricating oil and grease must be available for immediate
use.
3.After a period of usage, the equipment should be checked, to replace worn-and-torn parts such as rollers, rings and shovels. Be sure to fasten
connecting-bolts, nut collars to fix rollers properly. Be sure to lubricate the parts sufficiently.
4.Roller should be replaced after 500-hours use. To check and wash bearings in them and replace broken ones, and then fill enough oil and grease
(with oil-pump or grease-gun)

 

As the professional manufacturer of complete sets of mining machinery, such as Cone crushers, Rotary dryers, Stone crusher, Henan Hongxing is always doing the best in products and service.

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/26787532/viewspace-718593/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/26787532/viewspace-718593/