####################################################################
Clusterware Administration edit by sky on 20100 qq654268465
####################################################################
******************Administering Voting Disks****************
------------确定当前的voting disk:--------------------
$ crsctl query votedisk css
--------------备份voting disk:-------------------
$ dd if=voting_disk_name f=backup_file_name bs=4k -------linux or unix bs最小4k
ocopy voting_disk_name backup_file_name --------Windows
---------------还原voting disk:-------------------
dd if=backup_file_name f=voting_disk_name bs=8k
ocopy backup_file_name voting_disk_name
--------------添加、移动和删除votedisk:--------------
#crsctl query css votedisk
#crsctl delete css votedisk path -force ------path为voting disk驻留的全路径
#crsctl add css votedisk path -force --------只有当clusterware是停止的时候才用-force参数,否则当clusterware运行时有可能损坏集群配置
*****************************OCR Administering***************************************
oracle最多只能有两个OCR
---------------------------Replacing an OCR--------------------------------
$ocrcheck --------检查要替换的OCR是否可用
$crsctl check crs --------检查你要执行替换的node的oracle clusterware在running
#ocrconfig -replace ocr destination_file ------replace the primary OCR,destination_file or disk为指定磁盘位置
#ocrconfig -replace ocr disk ------replace the primary OCR
#ocrconfig -replace ocrmirror destination_file -----replace a secondary OCR,replacing可以在clusterware线或离线使用
#ocrconfig -replace ocrmirror disk -------replace a secondary OCR
#ocrconfig -repair -------如果你当前Oracle RAC cluster的一部分node被关闭,当node重启后使用下面的命令让node重装注册到OCR
-------------------------Repairing an Oracle Cluster Registry Configuration--------------------------
当集群配置信息改变时,你的clusterware的部分node是关闭的,当这些node clusterware重启后,需要将OCR的配置同步到这些node
$ocrconfig –repair ocrmirror device_name -------此命令仅改变命令执行所在node的OCR configuration
------------------------Removing an Oracle Cluster Registry------------------------
确保除要删除的OCR外,另外一个位置的OCR online
#ocrconfig -replace ocr --------------移除OCR主
#ocrconfig -replace ocrmirror ----------移除OCR镜像
---------------------overwrite the OCR(用当前ocr中的最新配置覆盖ocr disk上的信息)--------------------------
如果node不能start而且alert log contains CLSD-1009 and CLSD-1011 messages,则按如下顺序进行OCR的overwrite
1.和正常运行clusterware的节点比较/etc/oracle/ocr.loc(on Linux and UNIX,Registry on Windows systems)
如果不匹配,那么运行ocrconfig -repair
如果匹配,那么确保node能访问所有OCR的配置,运行ls(linux and unix)或dir(windows)
2.通过ocrdump命令确保大部分OCR含有最新的OCR信息
3.如果不能解决CLSD message,那么执行ocrconfig -overwrite
-----------------Managing Backups and Recovering the OCR------------------------------
Automatic backups:CRSD进程创建备份每4个小时,默认保存位置在CRS_home/cdata/cluster_name,可以使用ocrconfig -backuploc改变默认的备份位置
ocrconfig -showbackup ----------显示自动和手动备份OCR的位置及文件名信息,可加相应的参数只显示自动或手动备份信息
---------------------Restoring the OCR on linux and unix------------------------
#ocrconfig -showbackup
#ocrdump -backupfile file_name ------浏览备份文件的内容
#crsctl stop crs --------停止所有node的clusterware
#ocrconfig -restore file_name -------restoring
#crsctl start crs -----重启clusterware在所有node
$cluvfy comp ocr [-n node_list] [-verbose] ------验证OCR
-------------------------Diagnosing Oracle Cluster Registry Problems-------------------
ocrdump
ocrcheck
----------------OCR Export and Import----------------------------------------
ocrconfig -export
Importing Oracle Cluster Registry Content on Linux or UNIX Systems:
1.#crsctl stop crs -----在集群的所有节点
2.#ocrconfig -import file_name
3.#crsctl start crs -----在集群的所有节点
----------------------------Changing Public Network Addresses----------------
停止所有依赖于VIP的资源
$srvctl stop instance -d database_name -i instance_name --------------要停止所有实例的DB,使用srvctl stop database -d grid
$srvctl stop asm -n node_name
#ifconfig -a
$srvctl stop nodeapps -n node_name --------停止了VIP address, the GSD, the listener, and the ONS daemon currently running on the specified node
#ifconfig -a
$crs_stat -t
#vi /etc/hosts或编辑%windir%\system32\drivers\etc\hosts ----------修改所有node
#srvctl modify nodeapps -n node_name -A 192.168.2.125/255.255.255.0/eth0 -----------必须以root用户来执行
$srvctl start nodeapps -n node_name
重复以上步骤在剩余的集群node
$cluvfy comp nodecon -n node_list all [-verbose] -------------验证
------------------------------Changing Private Network Addresses-----------------------
如果更改的IP地址和以前的地址在同一个子网,则执行如下:
#crsctl stop crs -----在想更改地址的node上执行
#ifconfig ------操作系统级别更改相应接口网卡的private Addresses
#crsctl start crs
依此更改其余node的private Addresses
如果更改的IP地址和以前的地址不在同一个子网,则执行如下:
#crsctl stop crs ------在所有的node上执行,除一个node外
更改所有停止node的私有网卡的IP地址和子网
#crsctl stop crs ------停止未改变的node
#crsctl start crs ------在已更改地址后的node上执行
更改剩余那个node的私有网卡的IP地址和子网
#crsctl start crs -------最后剩余的那个node上执行
------------------------------------------------------------------------------------------
*******************************************************************************************
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/16807927/viewspace-711803/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/16807927/viewspace-711803/