your buddy drives you into a swimming pool place

Hybrids and resource of power keep do well. The Chevy Prius, Lincoln ES 300h, Chevy Prius C, and Honda CR-Z compounds, as well as the Car Leaf electric powered car, were among the top designs. Ford’s C-Max and Combination compounds were the only exclusions. Oh and if you are at a celebration and your buddy drives you into a swimming pool place and your cellphone requires an unfortunate dive with you, always remember to never switch the cellphone on (water and electronic products do NOT mix) and to quickly place it into a bag of dried rice for a few days… Chances are fairly excellent that your cellphone will keep perform again. (It proved helpful for me!)

Other guidelines to protected your electronic products in Cheap RC Quadcopter the hot summer season months? Leave them in the comments! Have you ever had an program get “fried” by the sun? In previous times svereal decades, Cars and Kia were beginning to challenge the Japanese people at the top of Client Reports’ stability positions. This year, they obtained well ahead of Detroit and most Western organizations. But they fallen a bit in the 2013 research, with Kia ranking midpack and Cars sliding to Twenty-first place.

The Nikola tesla Model S electric powered car performed well enough in the research to cheap rc helicopters earn a Recommendation from CR for initially. CR gathered details on more than 600 2012 and 2013 designs. Those who own the 2012 style revealed very few problems, although 2013 entrepreneurs revealed quite a few more. Problem locations involved wind noise, squeaks and rattles, and body components (including the sunroof, doors, and locks).

Of the 31 Honda designs in Client Reports’ research, only one, the F-150 pickup with the 3.7-liter V6, was above frequent. Seven achieved a frequent ranking. Ford’s difficulties don’t end with the traditionally problematic My-Touch techniques. Several EcoBoost turbocharged V6 designs have inadequate stability as well. Almost two-thirds of the 34 Fords and Lincolns in our research got ratings that were much worse than frequent.

来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/30112523/viewspace-1811476/,如需转载,请注明出处,否则将追究法律责任。

转载于:http://blog.itpub.net/30112523/viewspace-1811476/

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
以下是一个简单的Buddy System的C语言代码实现,用于分配和释放内存块: ```c #include <stdio.h> #include <stdlib.h> #include <math.h> #define MAX_LEVEL 10 // 最大层数 #define MIN_SIZE 8 // 最小内存块大小 // 内存块结构体 typedef struct buddy_block { int level; // 当前层数 int is_free; // 是否空闲 struct buddy_block *next; // 下一个内存块 } buddy_block; // 内存池结构体 typedef struct buddy_pool { int size; // 内存池大小 int max_level; // 最大层数 buddy_block *blocks; // 内存块数组 } buddy_pool; // 初始化内存池 void init_buddy_pool(buddy_pool *pool, int size) { int i, block_size; pool->size = size; pool->max_level = log2(size) - log2(MIN_SIZE) + 1; pool->blocks = (buddy_block *) malloc(sizeof(buddy_block) * size); for (i = 0; i < size; i++) { pool->blocks[i].level = -1; pool->blocks[i].is_free = 1; pool->blocks[i].next = NULL; } // 初始化每个层级的内存块 for (i = 0; i < pool->max_level; i++) { block_size = pow(2, i + log2(MIN_SIZE)); pool->blocks[size / block_size].level = i; pool->blocks[size / block_size].is_free = 1; pool->blocks[size / block_size].next = NULL; } } // 分配内存块 void *buddy_alloc(buddy_pool *pool, int size) { int i, level = ceil(log2(size)) - log2(MIN_SIZE); if (level >= pool->max_level) { return NULL; } // 在当前及以上层级查找空闲块 for (i = level; i <= pool->max_level; i++) { if (pool->blocks[pool->size / pow(2, i)].is_free == 1) { break; } } // 没有找到空闲块 if (i > pool->max_level) { return NULL; } else { // 分裂块 while (i > level) { buddy_block *block = &pool->blocks[pool->size / pow(2, i)]; block->is_free = 0; // 将块分裂为左右两块 block->next = &pool->blocks[pool->size / pow(2, i - 1)]; i--; } buddy_block *block = &pool->blocks[pool->size / pow(2, level)]; block->is_free = 0; return (void *) block; } } // 释放内存块 void buddy_free(buddy_pool *pool, void *ptr) { buddy_block *block = (buddy_block *) ptr; block->is_free = 1; // 合并块 while (block->level < pool->max_level) { buddy_block *buddy = block->next; if (buddy->is_free == 0 || buddy->level != block->level) { break; } // 合并块 block->next = buddy->next; block = &pool->blocks[pool->size / pow(2, block->level + 1)]; block->level = buddy->level + 1; } } // 打印内存池状态 void print_buddy_pool(buddy_pool *pool) { int i, level = -1; for (i = 0; i < pool->size; i++) { if (pool->blocks[i].level != level) { level = pool->blocks[i].level; printf("\nLevel %d:\n", level); } printf("%d ", pool->blocks[i].is_free); } printf("\n"); } int main() { buddy_pool pool; init_buddy_pool(&pool, 128); void *p1 = buddy_alloc(&pool, 16); void *p2 = buddy_alloc(&pool, 64); void *p3 = buddy_alloc(&pool, 32); print_buddy_pool(&pool); buddy_free(&pool, p2); buddy_free(&pool, p3); print_buddy_pool(&pool); return 0; } ``` 在上面的代码中,我们使用buddy_block结构体表示内存块,其中level表示当前块所在的层数,is_free表示该块是否空闲,next表示该块的下一个块。buddy_pool结构体表示内存池,其中size表示内存池大小,max_level表示最大层数,blocks表示内存块数组。 在初始化内存池时,我们根据内存池大小和最小内存块大小计算出最大层数,然后初始化每个层级的内存块。在分配内存块时,我们根据请求的内存大小计算出所需的层数,然后在当前及以上层级查找空闲块,如果没有找到,则返回NULL;如果找到,则将块分裂为左右两块,直到分裂到所需层数。在释放内存块时,我们将块标记为空闲,并尝试合并块,直到无法再合并为止。在打印内存池状态时,我们根据块的层数将块分组,并打印出每个块的空闲状态。 这是一个简单的Buddy System的C语言实现,具有基本的分配和释放功能。在实际使用时,需要根据具体情况进行调整和优化。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值