WARNING: inbound connection timed out (ORA-3136)而且sqlnet.log中记录了信息:
在metalink上查询了一下,发现这个错误在10g当中是很常见的。Metalink上有专门的bug和note对这个问题办法.Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
Time: 19-JUL-2009 11:25:26
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.129)(PORT=1521))
通过修改 listener.ora和 sqlnet.ora中的这个参数值:
1.set INBOUND_CONNECT_TIMEOUT_=0 in listener.ora
2. set SQLNET.INBOUND_CONNECT_TIMEOUT = 0 in sqlnet.ora of server.
3. stop and start both listener and database.
4. Now try to connect to DB and observe the behaviour
关于SQLNET.INBOUND_CONNECT_TIMEOUT参数,Oracle建议修改该参数,以避免denial-of-service攻击.
引用一段Oracle文档说明如下:
SQLNET.INBOUND_CONNECT_TIMEOUT
Purpose
Use the SQLNET.INBOUND_CONNECT_TIMEOUT parameter to specify the time, in seconds, for a client to connect with the database server and provide the necessary authentication information.
If the client fails to establish a connection and complete authentication in the time specified, then the database server terminates the connection. In addition, the database server logs the IP address of the client and an ORA-12170: TNS:Connect timeout occurred error message to the sqlnet.log file. The client receives either an ORA-12547: TNS:lost contact or an ORA-12637: Packet receive failed error message.
Without this parameter, a client connection to the database server can stay open indefinitely without authentication. Connections without authentication can introduce possible denial-of-service attacks, whereby malicious clients attempt to flood database servers with connect requests that consume resources.
To protect both the database server and the listener, Oracle Corporation recommends setting this parameter in combination with the INBOUND_CONNECT_TIMEOUT_listener_name parameter in the listener.ora file. When specifying values for these parameters, consider the following recommendations:
Set both parameters to an initial low value.
Set the value of the INBOUND_CONNECT_TIMEOUT_listener_name parameter to a lower value than the SQLNET.INBOUND_CONNECT_TIMEOUT parameter.
For example, you can set INBOUND_CONNECT_TIMEOUT_listener_name to 2 seconds and INBOUND_CONNECT_TIMEOUT parameter to 3 seconds. If clients are unable to complete connections within the specified time due to system or network delays that are normal for the particular environment, then increment the time as needed.
See Also:
Oracle9i Net Services Administrator's Guide for information about configuring these parameters
Default
None
Example
SQLNET.INBOUND_CONNECT_TIMEOUT=3
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/17172228/viewspace-777241/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/17172228/viewspace-777241/