linux在防火墙上打开1521端口

1、在 /etc/sysconfig/iptables中添加-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 1521 -j ACCEPT

[root@vaxph97 ~]# vi /etc/sysconfig/iptables


-A RH-Firewall-1-INPUT -m state –-state NEW -m tcp -p tcp -–dport 1521 -j ACCEPT
# Firewall configuration written by system-config-securitylevel
# Manual customization of this file is not recommended.
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:RH-Firewall-1-INPUT - [0:0]
-A INPUT -j RH-Firewall-1-INPUT
-A FORWARD -j RH-Firewall-1-INPUT
-A RH-Firewall-1-INPUT -i lo -j ACCEPT
-A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT
-A RH-Firewall-1-INPUT -p 50 -j ACCEPT
-A RH-Firewall-1-INPUT -p 51 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp --dport 5353 -d 224.0.0.251 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
-A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 1521 -j ACCEPT
COMMIT
~

2、保存后重启防火墙

service iptables restart

3、查看

[root@vaxph97 ~]# iptables -nL
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
RH-Firewall-1-INPUT  all  --  0.0.0.0/0            0.0.0.0/0           


Chain FORWARD (policy ACCEPT)
target     prot opt source               destination         
RH-Firewall-1-INPUT  all  --  0.0.0.0/0            0.0.0.0/0           


Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         


Chain RH-Firewall-1-INPUT (2 references)
target     prot opt source               destination         
ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0           
ACCEPT     icmp --  0.0.0.0/0            0.0.0.0/0           icmp type 255 
ACCEPT     esp  --  0.0.0.0/0            0.0.0.0/0           
ACCEPT     ah   --  0.0.0.0/0            0.0.0.0/0           
ACCEPT     udp  --  0.0.0.0/0            224.0.0.251         udp dpt:5353 
ACCEPT     udp  --  0.0.0.0/0            0.0.0.0/0           udp dpt:631 
ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:631 
ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED 
ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           state NEW tcp dpt:22 
REJECT     all  --  0.0.0.0/0            0.0.0.0/0           reject-with icmp-host-prohibited 
ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           state NEW tcp dpt:1521 

也可以使用telnet 127.0.0.1 1521测试是否开启

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/29802484/viewspace-1400041/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/29802484/viewspace-1400041/