Using DataDirect Connect® for ODBC with Oracle Heterogeneous Services
View PDF 摘自Datadirect http://www.datadirect.com/developer/odbc/oracle_heterogeneous/index.ssp
Introduction
Corporate developers frequently need to integrate and consolidate data residing in diverse database systems. Oracle users make use of Oracle Heterogeneous Services to integrate non-Oracle data into their primary database. Using the Generic Connectivity agent, Oracle users can communicate to another database or data store, such as XML, via ODBC.
DataDirect Connect for ODBC provides the most reliable and highest performing data access for users of Oracle Heterogeneous Services. Connect for ODBC does not require the installation and configuration of database client libraries. This dramatically improves performance and scalability and simplifies configuration of Oracle Generic Connectivity, while providing access to a larger number of various data sources.
This paper explains how to use DataDirect Connect for ODBC with Oracle Heterogeneous Services.
DataDirect Connect for ODBC in an Oracle Heterogeneous Services Environment
Generic Connectivity Architecture
Generic Connectivity is implemented by using a Heterogeneous Services ODBC agent. An ODBC agent is included as part of your Oracle system. Be sure to use the agent shipped with your particular Oracle system and installed in the same $ORACLE_HOME.
To access the non-Oracle data store using Generic Connectivity, the agent works with an ODBC driver. The ODBC driver that you use must be on the same platform as the ODBC agent. The non-Oracle data stores can reside on the same machine as the Oracle database or a different machine.
Installation Steps
This example shows the configuration of Generic Connectivity on a SUN Solaris system using DataDirect's ODBC driver to connect to Microsoft SQL Server. Please check your Oracle documentation for specific version and platform support.
1) Install the data dictionary tables and views for Heterogeneous Services.
Using the server manager or sqlplus logged on as sys, run caths.sql. For example using the server manager you can use the following example:
SQL> connect internal SQL> @/rdbms/admin/caths.sql;
This script is located in $ORACLE_HOME/rdbms/admin
2) Install the DataDirect Connect for ODBC Driver.
Some non-Oracle data stores will require that particular database's client library components to be installed. If the database is DB2, Sybase, SQL Server or Informix you should use the Connect for ODBC Wire Protocol driver for the particular database you are trying to access. These drivers do not require any additional components to be installed to connect to the database.
3) Configure your odbc data source in the .odbc.ini file. The example below is a data source to connect to MS SQL Server 2000
Note: Annotations to following examples file begin with the symbol and should not be included in the actual file.
[SQLServer Wire Protocol] Driver=/opt/odbc/lib/ivmsssXX.so Configured during ODBC driver installation Description=SQL Server Database=dbname Name of target database. Address=120.2.200.176,1433 IP address and port of target database. Quoteld=No AnsiNPW=No
4) Make sure the following entries are in the tnsnames.ora and listener.ora.
TNSNAMES.ORA
hsodbc= (description= (address=(protocol=tcp)(host=hostname)(port=1521)) (connect_data=(sid=hsmsql)) Needs to match the sid in listener.ora. (hs=ok) hs clause goes in the description. )
LISTENER.ORA
listener = (description_list = (description = (address_list = (address = (protocol = tcp)(host = unixhost)(port = 1521)) ) ) sid_list_listener= (sid_list= (sid_desc= (sid_name=hsmsql) Match the sid in tnsnames.ora. (oracle_home=/db/oracle/product/8.1.6) Appropriate $ORACLE_HOME (program= hsodbc) Agent Executable ) )
5) Before starting the listener, make sure the ODBC lib directory is specified in the shared library environment variable.
LD_LIBRARY_PATH=/db/oracle/product/8.1.6/bin:/opt/odbc/lib/ odbc lib path
After the LD_LIBRARY_PATH has been modified, start the listener.
Run "lsnrctl services" to verify that you now have a service handler for the hsmsql sid.
LSNRCTL> services Connecting to (address=(protocol=tcp)(host=unixhost)(port=1521)) Services Summary... hsmsql has 1 service handler(s) DEDICATED SERVER established:0 refused:0 LOCAL SERVER The command completed successfully
6) Create the Initialization file. You must create and customize an initialization file for your generic connectivity agent. Oracle supplies a sample initialization file named "inithsodbc.ora" which is stored in the $ORACLE_HOME/hs/admin directory.
To create an initialization file, copy the appropriate sample file and rename the file to initHS_SID.ora. In this example the sid noted in the listener and tnsnames files is "hsmsql" so the new initialization file is called inithsmsql.ora.
7) Make sure the following noted entries are in the inithsmsql.ora now located in $ORACLE_HOME/hs/admin
INITMSQL.ORA
# HS init parameters # HS_FDS_CONNECT_INFO = MS_SQLServer7 odbc data_source_name HS_FDS_TRACE_LEVEL = 0 trace levels 0 - 4 (4 is verbose) HS_FDS_TRACE_FILE_NAME = hsmsql.trc trace file name HS_FDS_SHAREABLE_NAME = /opt/odbc/lib/libodbc.so full path to odbc driver. # # # ODBC specific environment variables # set ODBCINI=/opt/odbc/odbc.ini location of odbc.ini # # Environment variables required for the non-Oracle system #
8) Create a database link to access target database. Be sure to use the appropriate quotes as noted below.
SQL> create database link hsmsql SQL> connect to "user" identified by "password" <= valid user/pwd on target DB SQL> using 'hsodbc';
9) To test, run a simple query of a known table on the target datastore.
SQL> select * from employee@hsmsql;
empid | firstname | lastname | department | job |
---------- | --------------- | --------------- | ---------- | --- |
10000 | Joseph | Johnston | Sales | CDW |
10001 | John | Ladd | Sales | WNV |
10002 | Ronald | Wall | Relations | NPI |
10003 | Julie | Reynolds | Relations | NPO |
10004 | Bill | Baird | Telemarket | PHN |
10005 | Jason | Linde | Sales | WND |
10006 | Edward | Lufner | Telemarket | CDG |
10007 | Mike | Seibt | Networking | IDW |
8 rows selected.
Common Errors and Solutions Associated with Heterogeneous Services and Generic Connectivity
The following list contains some of the most common errors associated with setting up Heterogeneous Services and Generic Connectivity.
ORA-28509: unable to establish a connection to non-Oracle system
ORA-02063: preceding line from HS
Cause: This indicates a problem with the Oracle configuration files.
Action:
- Make sure the HOST parameter in the tnsnames.ora file is correct
- Make sure the PORT number is correct
- Make sure the SID name is correct in both the TNSNAMES.ORA and LISTENER.ORA
ORA-02068: following severe error from HS
ORA-03114: not connected to ORACLE
Cause: This indicates the required syntax for the TNSNAMES.ORA file is not present.
Action: (HS=OK) has to be added to the tnsnames.ora file in the DESCRIPTION section.
ORA-02068: following severe error from HS
ORA-28511: lost RPC connection to heterogeneous remote agent using %tns_address%
Cause: The listener is unable to spawn the HS agent or the agent cannot find the ODBC lib directory.
Action: The PROGRAM line in the listener.ora file is incorrect or not specified. Make sure LD_LIBRARY_PATH includes the $ODBC_HOME/lib directory. If not, set LD_LIBRARY_PATH and restart the listener.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message: [Transparent gateway for ODBC][H001] The environment variable is not set.
ORA-02063: preceding 2 lines from HS
Cause: Incorrect parameter settings in the HS init.ora file.
Action: Set HS_FDS_CONNECT_INFO in the HS init.ora file to the data source name located in the odbc.ini file.
Example: HS_FDS_CONNECT_INFO = MS_SQLServer Wire Protocol Make sure the HS init.ora file exists in the $ORACLE_HOME/hs/admin directory and has the same name as the SID in the LISTENER.ORA.
Example: If SID=hsodbc in the listener.ora file, then the HS init.ora file would be named $ORACLE_HOME/hs/admin/inithsodbc.ora
ORA-28500: connection from ORACLE to a non-Oracle system returned this message: [Transparent gateway for ODBC][H001] The environment variable is not set.
ORA-02063: preceding 2 lines from HS
Cause: Incorrect parameter settings in the HS init.ora file.
Action: Set HS_FDS_SHAREABLE_NAME to the full path plus filename to the libodbc.so file.
Example: HS_FDS_SHAREABLE_NAME=/opt/odbc/lib/libodbc.so
ORA-28500: connection from ORACLE to a non-Oracle system returned this message: [Transparent gateway for ODBC]DRV_InitTdp:
(SQL State: 01000; SQL Code: 0)
ORA-02063: preceding 2 lines from HS
Cause: The HS agent cannot find the odbc.ini file.
Action: The ODBCINI variable is not set in the HS init.ora file and needs to be set.
Example: set ODBCINI=/opt/odbc/odbc.ini
ORA-00942: table or view does not exist [Transparent gateway for ODBC]DRV_OpenTable: [DATADIRECT][ODBC SQL Server Driver][SQL Server]Invalid object name '%table%'.
SQL State: S0002; SQL Code: 208)
ORA-02063: preceding 2 lines from HS
Cause: The data source in the odbc.ini file has incorrect database information.
Action: Consult the Connect for ODBC Reference Guide on how to set the parameters for your datasource.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message: [Transparent gateway for ODBC]DRV_InitTdp: [DATADIRECT][ODBC SQL Server Driver][libssclient15]General network error. Check your network documentation.
(SQL State: 08001; SQL Code: 11)
ORA-02063: preceding 2 lines from HS
Cause: There is a problem at the network layer communicating with the foreign data source.
Action: Make sure the destination host or IP address and port number are correct for the data source in the odbc.ini file.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message: [Transparent gateway for ODBC]DRV_InitTdp: [DATADIRECT][ODBC SQL Server Driver][SQL Server] Login failed
(SQL State: 28000; SQL Code: 4002)
ORA-02063: preceding 3 lines from HSTEST
Cause: The Oracle database link created for the foreign datasource has either no credentials or incorrect credentials.
Action: Recreate the Oracle database link with the proper username and password. Also, username and password must be in double quotes.
Example: create database link ODBC connect to "sa" identified by "pencil" using 'hsodbc'.
Summary
Heterogeneous Services and Generic Connectivity provide Oracle customers the ability to access and integrate non-Oracle data sources, providing a wide degree of flexibility in a multi-database environment. Companies who wish to use Generic Connectivity to consolidate and integrate data with Oracle require optimal connectivity to ensure the best performance. DataDirect Connect for ODBC delivers the most scalable and best performing connectivity available for Oracle Heterogeneous Services.
- 作者: 胡桃木 2006年05月16日, 星期二 09:14 回复(0) | 引用(0) 加入博采
oracle和sqlserver互訪
by HuiYi_Love from ITPUB
oracle和sqlserver互訪!
前几天由於工作的原因查找了oracle中查找sqlserver數据的資料,現測試成功,整理一下貼出!
要求:從Oracle中能取SqlServer的數据
環境:
OracleDb: Linux + Oracle9i Enterprise Edition Release 9.0.1.1.1 - Production IP:192.168.1.52(TOPPROD)
MSQLDB: Windows2000 + SqlServer2000 IP:192.168.1.50(ERPSQL),測試用戶:sa/pass 測試數据表:EK.ACPTA
网關: WindowsXp + Oracle9i Enterprise Edition Release 9.0.1.1.1 - Production IP:192.168.1.221(S0504027),因為暫在測試階段,所以网關裝在我用的机器,网關可以裝在MSQLDB上
1.通過ODBC通用方式聯接
2.通過"透明网關"方式聯接
3.SQLSERVER訪問ORACLE
環境:windowsxp + sqlserver2000 + Oracle9i Enterprise Edition Release 9.0.1.1.1 - Production IP:192.168.1.221
ORACLE与异构数据库的互联
本人注释:
1、先在OS中创建ODBC数据源,例如windows—>控制面板—>数据源(ODBC)—>系统DSN(Data Service Name)。
2、在$ORACLE_HOMEhsadmin中,创建init.ora文件,用具体的字符代替,例如initmyaccess1.ora或initsqlserver001.ora。
3、在$ORACLE_HOMEnetworkadminlistener.ora中,增加指向前面ODBC数据源的脚本。
4、在$ORACLE_HOMEnetworkadmintnsnames.ora中,增加指向前面SID的脚本。
5、将$ORACLE_HOMEnetworkadminsqlnet.ora中的SQLNET.AUTHENTICATION_SERVICES = (NTS)注释掉,或将(NTS)改为(NONE)。表示不要有操作系统的验证用户机制。
6、对于ORA-02085的错误,涉及数据库服务名的的识别问题,方法有三个:
1.修改对方的GLOBAL_NAMES参数为FALSE即:ALTER SYSTEM SET GLOBAL_NAMES=FALSE;
2.将对方的GLOBAL_NAME设置成与数据库连接相同的名称
3.将数据库连接删掉重新创建成与对方实例名相同的数据库连接。下面是测试结果:
SQL> CREATE PUBLIC DATABASE LINK "MASTER.COM" USING 'ORA9I';
以下为原文:
====================================
欢迎大家同我交流:小白 enhydra_boy@tom.com
欢迎转载,请保留本声明,谢谢!
====================================
Oracle 8.1.6 中引入普通连接技术的概念(Generic connectivity),这一连接解决方案满足了对许多异种数据库存储的数据访问需求,同时并不需要安装ORACLE的透明网关(ORACLE Transparent Gateway)。该特性允许使用业界标准 ODBC 和 OLEDB 建立透明连接。
什么是普通连接(Generic connectivity)
普通连接是ORACLE的一个低端数据集成解决方案,目标是提供ORACLE 8i可以连接到非oracle数据库的能力。它的实现,是通过异种服务代理(Heterogeneous Services)来实现的。
异种服务代理的类型:
-
ODBC agent for accessing ODBC data providers
-
OLE DB agent for accessing OLE DB data providers that support SQL processing--sometimes referred to as OLE DB (SQL)
-
ODBC agent for acceng OLE DB data providers without SQL processing support--sometimes referred to as OLE DB (FS)
普通连接的系统结构图
ORACLE客户端程序访问非ORACLE数据库的过程:客户端程序是通过SQL*NET连接ORACLE服务器,关于异种数据库的访问,交给HS代理实现。
HS代理通过下面的功能组件实现:ODBC管理器->ODBC驱动程序->数据库的网络客户端->目标数据库。
如果异种库和ORACLE数据库位于同一台服务器上,一般来说驱动程序是可以直接和本机的数据库通讯,就可以省去数据库的网络客户端这一层。
数据类型的转换
ORACLE自动实现ODBC和OLEDB数据类型到ORACLE数据类型的转换,具体的对应转换可以参考ORACLE的联机帮助http://download-west.oracle.com/docs/cd/A87860_01/doc/server.817/a76960/datatype.htm。
普通连接的限制
1 含有BLOB列的表必须要有一
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/66634/viewspace-846083/,如需转载,请注明出处,否则将追究法律责任。
<%=items[i].content%>
<%if(items[i].items.items.length) { %><%=items[i].items.items[j].username%> 回复 <%=items[i].items.items[j].tousername%>: <%=items[i].items.items[j].content%>
转载于:http://blog.itpub.net/66634/viewspace-846083/