今天在运行NETCA时遇到了一些问题，不过及时解决了

      嘿嘿，今天做了个用NETCA配置LISTENER.ORA的时候，刚开始进都进不去，出现了如下情况，

Xlib: connection to ":0.0" refused by server
Xlib:connection to ":0.0"refused by server
Xlib: No protocol specified
   解决办法在网上也搜到了，那就是在ROOT下执行

：
xhost local:oracle non-network local connections being added to access control list

然后就好使了。结果在最后的时候出现了如下错误。

       The information provided for this listener is currently in use by other
software on this computer,you can proceed with the configuration as it is
bu ti will not be possible to start this listener until the conflict is resolved.would you like
to continue with the configuration anyway?
     读了几遍，也没太明白，最后发现自己刚刚修改完IP地址，但没有在/ETC/HOSTS下修改，遂修改并重启，OK了。

   

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/25116248/viewspace-682253/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/25116248/viewspace-682253/