无组件上传图片至SQLSERVER数据库(示例) (转)

无组件上传图片至SQLSERVER数据库(示例) (转)[@more@]

在无组件上传我刚试成功，所以提供代码给大家一起共享。

/* addemployee.ASP  */

职工之家

RM name="form1" method="post" action="transact1.asp" enctype="multipart/form-data">
 

标题：
分类：
正文：
图片：
	1、您上传的图片大小请控制在500K以内,否则不允许上传   2、你上传的图片必须为150*130象素   3、上传上传图片的格式为JPG或者GIF

*************************************************************************

/* transact1.asp*/
<!--#include file="../func/conn.inc"--&gt
<!--#include file="../func/fUPLOAD.inc"--&gt
<!--#include file ="../func/myfunctions.inc"--&gt
If Request.ServerVariables("REQUEST_METHOD") = "POST" Then
 Dim Fields
 Dim strTitle,strSort,strContent
 Dim rs,ssql
 Dim iMaxid
 Dim strMaxid
 Dim strlen 
 
 Set Fields = GetUpload()
 strTitle=BinaryToString(Fields("txtTitle").value)
 strSort=BinaryToString(Fields("txtSort").value)
 strContent=BinaryToString(Fields("txtContent").value)
 strSort=split(trim(strSort),"-")
 
 if instr(1,lcase(Fields("file").FileName),".jpg")=0 and instr(1,lcase(Fields("file").FileName),".gif")=0 then
  response.write ""
 response.write ""
  Response.end
 end if

 if Fields("file").Length>500000 then
  response.write ""
  response.write ""
 response.end
 end if

 '/*存至数据库*/
  if Fields("file").FileName<>"" then
  Set rs=Server.Createobject("ADOdb.Recordset")
 sSql="select * from employee order by id desc"
 rs.open sSql,conn,2,2
 if not rs.eof  then
  iMaxid=Clng(rs("id"))+1 
  strlen=4-len(cstr(iMaxid))
  strMaxid=string(strlen,"0") & cstr(iMaxid) 
  else
  strMaxid="0001" 
  end if
 rs.addnew
  rs("id")=strMaxid
  rs("title")=strTitle
 rs("sort")=strSort(0)
 rs("img").AppendChunk Fields("file").Value
 rs("content")=quoteChg(strContent)
 rs("todate")=date()
  rs.update
  rs.close
  response.write ""
  end if
end if
%>

**********************************************************************
/*fupload.inc*/

'********************************** GetUpload **********************************
'.Name name of the form field ()
'.ContentDisposition = Content-Disposition of the form field
'.FileName = source file name for
'.ContentType = Content-Type for
'.Value = Binary value of the source field.
'.Length = Len of the binary data field
Function GetUpload()
Dim Result
Set Result = Nothing
If Request.ServerVariables("REQUEST_METHOD") = "POST" Then 'Request method must be "POST"
Dim CT, PosB, Boundary, Length, PosE
CT = Request.ServerVariables("HTTP_Content_Type") 'reads Content-Type header
'response.write CT
'application/x-www-form-urlencoded
If LCase(Left(CT, 19)) = "multipart/form-data" Then 'Content-Type header must be "multipart/form-data"
'This is upload request.
'Get the boundary and length from Content-Type header
PosB = InStr(LCase(CT), "boundary=") 'Finds boundary
If PosB > 0 Then Boundary = Mid(CT, PosB + 9) 'Separetes boundary
Length = CLng(Request.ServerVariables("HTTP_Content_Length")) 'Get Content-Length header
if "" & UploadSizeLimit<>"" then
UploadSizeLimit = clng(UploadSizeLimit)
if Length > UploadSizeLimit then
' on error resume next 'Clears the input buffer
' response.AddHeader "Connection", "Close"
' on error goto 0
Request.BinaryRead(Length)
Err.Raise 2, "GetUpload", "Upload size " & FormatNumber(Length,0) & "B exceeds limit of " & FormatNumber(UploadSizeLimit,0) & "B"
exit function
end if
end if

If Length > 0 And Boundary <> "" Then 'Are there required informations about upload ?
Boundary = "--" & Boundary
Dim Head, Binary
Binary = Request.BinaryRead(Length) 'Reads binary data from client

'Retrieves the upload fields from binary data
Set Result = SeparateFields(Binary, Boundary)
Binary = Empty 'Clear variables
Else
Err.Raise 10, "GetUpload", "Zero length request ."
End If
Else
Err.Raise 11, "GetUpload", "No file sent."
End If
Else
Err.Raise 1, "GetUpload", "Bad request method."
End If
Set GetUpload = Result
End Function

'********************************** SeparateFields **********************************
'This function retrieves the upload fields from binary data and retuns the fields as array
'Binary is safearray of all raw binary data from input.
Function SeparateFields(Binary, Boundary)
Dim PosOpenBoundary, PosCloseBoundary, PosEndOfHeader, isLastBoundary
Dim Fields
Boundary = StringToBinary(Boundary)

PosOpenBoundary = InstrB(Binary, Boundary)
PosCloseBoundary = InstrB(PosOpenBoundary + LenB(Boundary), Binary, Boundary, 0)

Set Fields = CreateObject("Scripting.Dictionary")

Do While (PosOpenBoundary > 0 And PosCloseBoundary > 0 And Not isLastBoundary)
'Header and file/source field data
Dim HeaderContent, FieldContent
'Header fields
Dim Content_Disposition, FormFieldName, SourceFileName, Content_Type
'Helping variables
Dim Field, TwoCharsAfterEndBoundary
'Get end of header
PosEndOfHeader = InstrB(PosOpenBoundary + Len(Boundary), Binary, StringToBinary(vbCrLf + vbCrLf))

'Separates field header
HeaderContent = MidB(Binary, PosOpenBoundary + LenB(Boundary) + 2, PosEndOfHeader - PosOpenBoundary - LenB(Boundary) - 2)

'Separates field content
FieldContent = MidB(Binary, (PosEndOfHeader + 4), PosCloseBoundary - (PosEndOfHeader + 4) - 2)

'Separates header fields from header
GetHeadFields BinaryToString(HeaderContent), Content_Disposition, FormFieldName, SourceFileName, Content_Type

'Create one field and assign parameters
Set Field = CreateUploadField()
Field.Name = FormFieldName
Field.ContentDisposition = Content_Disposition
Field.FilePath = SourceFileName
Field.FileName = GetFileName(SourceFileName)
Field.ContentType = Content_Type
Field.Value = FieldContent
Field.Length = LenB(FieldContent)

Fields.Add FormFieldName, Field

'Is this ending boundary ?
TwoCharsAfterEndBoundary = BinaryToString(MidB(Binary, PosCloseBoundary + LenB(Boundary), 2))
'Binary.Mid(PosCloseBoundary + Len(Boundary), 2).String
isLastBoundary = TwoCharsAfterEndBoundary = "--"
If Not isLastBoundary Then 'This is not ending boundary - go to next form field.
PosOpenBoundary = PosCloseBoundary
PosCloseBoundary = InStrB(PosOpenBoundary + LenB(Boundary), Binary, Boundary )
End If
Loop
Set SeparateFields = Fields
End Function

'********************************** Utilities **********************************
Function BinaryToString(str)
strto = ""
for i=1 to lenb(str)
if AscB(MidB(str, i, 1)) > 127 then
strto = strto & chr(Ascb(MidB(str, i, 1))*256+Ascb(MidB(str, i+1, 1)))
i = i + 1
else
strto = strto & Chr(AscB(MidB(str, i, 1)))
end if
next
BinaryToString=strto

End Function

Function StringToBinary(String)
Dim I, B
For I=1 to len(String)
B = B & ChrB(Asc(Mid(String,I,1)))
Next
StringToBinary = B
End Function

'Separates header fields from upload header
Function GetHeadFields(ByVal Head, Content_Disposition, Name, FileName, Content_Type)
Content_Disposition = LTrim(SeparateField(Head, "content-disposition:", ";"))
Name = (SeparateField(Head, "name=", ";")) 'ltrim
If Left(Name, 1) = """" Then Name = Mid(Name, 2, Len(Name) - 2)
FileName = (SeparateField(Head, "filename=", ";")) 'ltrim
If Left(FileName, 1) = """" Then FileName = Mid(FileName, 2, Len(FileName) - 2)
Content_Type = LTrim(SeparateField(Head, "content-type:", ";"))
End Function

'Separets one filed between sStart and sEnd
Function SeparateField(From, ByVal sStart, ByVal sEnd)
Dim PosB, PosE, sFrom
sFrom = LCase(From)
PosB = InStr(sFrom, sStart)
If PosB > 0 Then
PosB = PosB + Len(sStart)
PosE = InStr(PosB, sFrom, sEnd)
If PosE = 0 Then PosE = InStr(PosB, sFrom, vbCrLf)
If PosE = 0 Then PosE = Len(sFrom) + 1
SeparateField = Mid(From, PosB, PosE - PosB)
Else
SeparateField = Empty
End If
End Function

'Separetes file name from the full path of file
Function GetFileName(FullPath)
Dim Pos, PosF
PosF = 0
For Pos = Len(FullPath) To 1 Step -1
Select Case Mid(FullPath, Pos, 1)
Case "/", "": PosF = Pos + 1: Pos = 0
End Select
Next
If PosF = 0 Then PosF = 1
GetFileName = Mid(FullPath, PosF)
End Function

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/10752043/viewspace-960554/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/10752043/viewspace-960554/