VMware虚拟机重启网络报错" Error: No suitable device found"

在VMware虚拟机中克隆CentOS，重启网络时报错
[root@localhost ~]# service network restart
Shutting down loopback interface:                          [  OK  ]
Bringing up loopback interface:                            [  OK  ]
Bringing up interface eth0:  Error: No suitable device found: no device found for connection 'System eth0'.
                                                           [FAILED]

查看网络设置，发现 网卡的MAC地址配置有问题
[root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
BOOTPROTO="dhcp"
HWADDR="00:0c:29:f5:68:ae"
IPV6INIT="yes"
NM_CONTROLLED="yes"
ONBOOT="yes"
TYPE="Ethernet"
UUID="08734f61-956d-4d50-b8ca-ef9fd9242f60"

[root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth1
BOOTPROT=static
HWADDR="00:0c:29:f5:68:b8"
IPADDR=192.168.174.30
GATEWAY=192.168.174.1
NETMASK=255.255.255.0
ONBOOT=yes

[root@localhost ~]# cat /etc/udev/rules.d/70-persistent-net.rules 
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.

# PCI device 0x8086:0x100f (e1000) (custom name provided by external tool)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:f5:68:ae", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x8086:0x100f (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:f5:68:b8", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

# PCI device 0x8086:0x100f (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:05:7a:9d", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"

# PCI device 0x8086:0x100f (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:05:7a:a7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3"

更改网卡设置
[root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
BOOTPROTO="dhcp"
HWADDR="00:0c:29:05:7a:9d"
IPV6INIT="yes"
NM_CONTROLLED="yes"
ONBOOT="yes"
TYPE="Ethernet"
UUID="08734f61-956d-4d50-b8ca-ef9fd9242f60"

[root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth1
BOOTPROT=static
HWADDR="00:0c:29:05:7a:a7"
IPADDR=192.168.174.30
GATEWAY=192.168.174.1
NETMASK=255.255.255.0
ONBOOT=yes

删除下面配置文件中的网卡信息

[root@localhost ~]# cat /etc/udev/rules.d/70-persistent-net.rules 
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.

重启虚拟机后，恢复正常

[root@localhost ~]# reboot
[root@localhost ~]# ifconfig 
eth0      Link encap:Ethernet  HWaddr 00:0C:29:05:7A:9D  
          inet addr:192.168.174.133  Bcast:192.168.174.255  Mask:255.255.255.0
          inet6 addr: fe80::20c:29ff:fe05:7a9d/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:26 errors:0 dropped:0 overruns:0 frame:0
          TX packets:29 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:3445 (3.3 KiB)  TX bytes:3147 (3.0 KiB)

eth1      Link encap:Ethernet  HWaddr 00:0C:29:05:7A:A7  
          inet addr:192.168.174.30  Bcast:192.168.174.255  Mask:255.255.255.0
          inet6 addr: fe80::20c:29ff:fe05:7aa7/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:1696 (1.6 KiB)  TX bytes:1045 (1.0 KiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:12 errors:0 dropped:0 overruns:0 frame:0
          TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:720 (720.0 b)  TX bytes:720 (720.0 b)

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/26506993/viewspace-2131757/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/26506993/viewspace-2131757/