1,停
vmware
rhel5(init 0)
2,通过vmware添加2 disk(各为5g)
3,启动rhel5
4,fdisk -l --查看新增磁盘
5,fdisk /dev/hdb --进行分区,我只分一个分区,省得烦
附上 fdisk具体操作如下:
[root@rhel5 ~]# fdisk /dev/hdd --/dev/hdd为磁盘名
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.
The number of cylinders for this disk is set to 10402.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help): m --查看fdisk相关命令
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition --删除一个分区
l list known partition types
m print this menu
n add a new partition --添加一个分区
o create a new empty DOS partition table
p print the partition table --展示分区信息
q quit without saving changes --退出不进行保存
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit --保存分区操作配置信息
x extra functionality (experts only)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-10402, default 1): --回车就可以了
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-10402, default 10402): 5gb --给的分区大小
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
2,通过vmware添加2 disk(各为5g)
3,启动rhel5
4,fdisk -l --查看新增磁盘
5,fdisk /dev/hdb --进行分区,我只分一个分区,省得烦
附上 fdisk具体操作如下:
[root@rhel5 ~]# fdisk /dev/hdd --/dev/hdd为磁盘名
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.
The number of cylinders for this disk is set to 10402.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help): m --查看fdisk相关命令
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition --删除一个分区
l list known partition types
m print this menu
n add a new partition --添加一个分区
o create a new empty DOS partition table
p print the partition table --展示分区信息
q quit without saving changes --退出不进行保存
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit --保存分区操作配置信息
x extra functionality (experts only)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-10402, default 1): --回车就可以了
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-10402, default 10402): 5gb --给的分区大小
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/23757700/viewspace-686855/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/23757700/viewspace-686855/