This document is intended for trained servicers who are familiar with IBM Personal Computer products. Use this document along with advanced diagnostic tests to troubleshoot problems effectively. Before servicing an IBM product, be sure to review the safety information. Click here to review safety information.
In the following index, X can represent any number.
Error Code | FRU/Action |
---|---|
000 SCSI adapter not enabled. | Verify adapter device and Bus Master fields are enabled in PCI configuration program. See documentation shipped with computer. |
02X | SCSI adapter |
08X Check SCSI terminator installation. |
|
101 System board interrupt failure. | System board |
102 System board timer error. | System board |
106 | System board |
110 System board memory parity error. |
|
111 I/O channel parity error. |
|
114 Adapter ROM error. |
|
129 Internal cache test error. |
|
151 Real-time clock failure. | System board |
161 Bad CMOS battery. |
|
162 Configuration mismatch. |
|
162 And unable to run diagnostics. |
|
163 Clock not updating or invalid time set. |
|
164 POST detected a base memory or extended memory size mismatch error. |
|
17X, 18X | C2 security |
175 |
|
176 | Covers were removed from the computer. |
177 Corrupted Administrator Password. |
|
178 |
|
183 | Enter the administrator password |
184 Password removed due to check-sum error. | Enter new password |
185 Corrupted boot sequence. | Set configuration and reinstall the boot sequence. |
186 |
|
189 | More than three password attempts were made to access the computer. |
1XX Not listed above. | System board |
201, 20X Memory data error. |
|
225 | Unsupported memory |
229 External cache test error. |
|
262 POST detected a base memory or extended memory type error. |
|
301 |
|
303 With an 8603 error. |
|
303 With no 8603 error. |
|
3XX Not listed above. |
|
5XX (if installed) |
|
601 |
|
602 |
|
604 And able to run diagnostics |
|
604 And unable to run diagnostics. |
|
605 POST cannot unlock the diskette drive. |
|
662 | Diskette drive configuration error or wrong diskette drive type, run Set Configuration. |
6XX Not listed above. |
|
762 Math coprocessor configuration error. |
|
7XX Not listed above. |
|
962 Parallel port configuration error. |
|
9XX |
|
1047 | 16-Bit AT Fast SCSI adapter |
107X Check SCSI terminator installation. |
|
1101 Serial connector error, possible system board failure. | Run Advanced Diagnostics |
1101, 1102, 1106, 1108, 1109 |
|
1107 |
|
1102 Card selected feedback error. |
|
1103 Port fails register check. |
|
1106 Serial option cannot be turned off. |
|
1107 |
|
1110 Register test failed. |
|
1116 Interrupt error. | Run Advanced Diagnostics |
1117 Failed baud rate test. | Run Advanced Diagnostics |
1162 Serial port configuration error. |
|
11XX Not listed above. | System board |
1201 |
|
1202, 1206, 1208, 1209, 12XX |
|
1207 |
|
13XX | Game adapter |
1402 Printer not ready. | Information only |
1403 No paper error, or interrupt failure. | Information only |
1404 System board timeout failure. | Run Advanced Diagnostics |
1405 Parallel adapter error. | Run Advanced Diagnostics |
1406 Presence test error. | Run Advanced Diagnostics |
14XX Not listed above. Check printer before replacing system board. |
|
15XX | SDLC adapter |
1692 Boot sequence error. | Run FDISK to ensure at least one active partition is set active. |
16XX | 36/38 Workstation adapter |
1762 Hard disk drive configuration error. | Run Configuration (See Setup Utility Program.) |
1780 (Disk Drive 0) 1781 (Disk Drive 1) 1782 (Disk Drive 2) 1783 (Disk Drive 3) |
|
180X, 185X PCI configuration or resource error. |
|
1962 Boot sequence error. | Possible hard disk drive problem, see hard disk drive Boot Error. |
209X |
|
20XX Not listed above |
|
21XX |
|
2401, 2402 If screen colors change. | display |
2401, 2402 If screen colors are OK. |
|
2409 | display |
2410 |
|
2462 Video memory configuration error. |
|
3015, 3040 Check for missing wrap or terminator plug on the adapter. |
|
30XX |
|
3115, 3140 |
|
31XX |
|
36XX |
|
38XX |
|
4611, 4630 |
|
4612, 4613 4640, 4641 |
|
4650 | Multiport interface cable |
46XX Not listed above. |
|
5600 | Financial system controller adapter |
5962 CD-ROM configuration error. |
|
62XX |
|
63XX |
|
64XX | Network adapter |
71XX | Voice adapter |
74XX (if installed) |
|
76XX | Page printer adapter |
78XX | High Speed adapter |
79XX | 3117 adapter |
80XX | PCMCIA adapter |
84XX |
|
8601, 8602 |
|
8603, 8604 |
|
86XX Not listed above |
|
89XX |
|
91XX |
|
96XX |
|
10101, 10102, 10104 10105, 10106, 10107 10108, 10109, 10111 10112, 10113, 10114 10115, 10116 |
|
10103, 10110, 101171 |
|
10117 Not listed above. speaker |
|
10118 |
|
10119 |
|
10120 |
|
10132, 10133, 10134 10135, 10136, 10137 10138, 10139, 10140 10141, 10142, 10143 10144, 10145, 10146 10147, 10148, 10149 10150, 10151, 10152 | Modem |
10153 |
|
101XX Not listed above. |
|
10450, 10451, 10490 10491, 10492, 10499 Read/write error. |
|
10452 Seek test error. | Run Advanced Diagnostics |
10453 Wrong drive type? | Information only |
10454 Sector buffer test error. | Run Advanced Diagnostics |
10455, 10456 Controller error. | Run Advanced Diagnostics |
10459 Drive diagnostic command error. | Information only |
10461 Drive format error | Run Advanced Diagnostics |
10462 Controller seek error. | Run Advanced Diagnostics |
10464 Hard drive read error. | Run Advanced Diagnostics |
10467 Drive non fatal seek error. | Run Advanced Diagnostics |
10468 Drive fatal seek error. | Run Advanced Diagnostics |
10469 Drive soft error count exceeded. | Run Advanced Diagnostics |
10470, 10471, 10472 Controller wrap error. | Run Advanced Diagnostics |
10473 Corrupt data. Low level format might be required. | Information only |
10480 |
|
10481 ESDI drive D seek error. | Run Advanced Diagnostics |
10482 Drive select acknowledgement bad. | Run Advanced Diagnostics |
106X1 |
|
10635 |
|
10651, 10660 |
|
106XX Not listed above. | Ethernet adapter |
107XX Diskette drive |
|
109XX Check the adapter cables. |
|
112XX This adapter does not have cache. |
|
119XX | Adapter |
121XX |
|
136XX |
|
137XX | System board |
141XX | Realtime interface coprocessor portmaster adapter/A |
143XX |
|
14710, 14711 |
|
148XX | Video adapter |
14901, 14902 1491X, 14922 |
|
14932 |
|
16101 | Riser card battery |
161XX | Fax concentrator adapter |
164XX |
|
16500 | 6157 tape attachment adapter |
16520, 16540 |
|
166XX, 167XX |
|
18001 to 18029 |
|
18031 to 18039 | Wizard adapter cable |
185XX XX |
|
20001 to 20003 |
|
20004 |
|
20005 to 20010 |
|
200XX Not listed above. Image-I adapter/A |
|
20101 to 20103 |
|
20104 |
|
20105 to 20110 |
|
Image adapter/A memory Test failure, indicated by graphic of adapter. | Replace memory module (shown in graphic.) |
206XX |
|
208XX Verify there are no duplicate SCSI ID settings on the same bus. | Any SCSI device |
210XX XX Internal bus, size unknown. 210XXX1 External bus, size unknown. |
|
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/743764/viewspace-1004015/,如需转载,请注明出处,否则将追究法律责任。
![user_pic_default.png](http://blog.itpub.net/images/user_pic_default.png)
<%=items[i].content%>
<%if(items[i].items.items.length) { %><%=items[i].items.items[j].username%> 回复 <%=items[i].items.items[j].tousername%>: <%=items[i].items.items[j].content%>
最新文章
- 中国排名前100的IT公司
- oracle复制软件排名『复制技术系列』
- Exp時遭遇 EXP-00008 ORA-00942 EXP-00024 EXP-00000
- 无干扰无线网络:用交换机控制AP
- Troubleshooting SCSI issues
- IBM Tapetool
- Troubleshooting Hard drive (HDD) issues
- Troubleshooting ServeRAID controller issues
- ServeRAID mismatched software levels can result in system problems
- ServeRAID disk drive error recovery
转载于:http://blog.itpub.net/743764/viewspace-1004015/