[root@ccptdb ~]# ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: external
Auto-negotiation: off
Link detected: yes
[root@ccptdb ~]#
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/35489/viewspace-682550/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/35489/viewspace-682550/