如何为您的Kwikset Kevo Smart Lock启用自动锁定

If you ever forget to lock your door on the way out, The Kwikset Kevo can make your life easy by doing it automatically whenever you leave the house. Here’s how to enable it.

如果您忘记在出门时锁上门，The Kwikset Kevo可以在您离开家门时自动执行，使您的生活变得轻松。 启用它的方法如下。

The feature is called Auto-Lock, and it’s actually nothing more than having the Kevo automatically re-lock itself 30 seconds after it unlocks. It can be convenient, but it will do this no matter what. So if you come home and leave the door open for longer than 30 seconds, the lock will re-lock anyway, requiring you to unlock the Kevo before you can close the door.

该功能称为自动锁定，实际上无非就是让Kevo解锁30秒后自动重新锁定自身。 可能很方便，但是无论如何都会这样做。 因此，如果您回家并让门保持打开状态超过30秒钟，则无论如何，锁将重新锁定，这要求您在关闭门之前先解锁Kevo。

It’s not a huge inconvenience by any means, and if you can get past that one little quirk, Auto-Lock can be a huge security boon for you.

无论如何，这都不是一个巨大的麻烦，而且如果您能够克服一个怪癖，自动锁定可以为您带来巨大的安全利益。

To enable it, head over to your Kevo lock on the inside of the door and remove the entire interior cover. You’ll need a screwdriver to remove the three screws holding it in place (two on the side and one on the bottom).

要启用它，请转到门内侧的Kevo锁，然后卸下整个内盖。 您需要一把螺丝起子才能将将其固定在适当位置的三颗螺钉卸下(侧面的两个，底部的一个)。

Once the cover is off, you’ll see a small four-switch panel on the mechanism.

机盖关闭后，您会在机构上看到一个小的四开关面板。

Locate switch #4 and turn it on.

找到开关＃4并将其打开。

If you can’t use your fingernail to push it up, use the tip of your screwdriver.

如果您无法用指甲将其向上推，请使用螺丝刀的尖端。

Put the interior cover back onto the lock and you’re good to go! Be sure to test it out first before you officially use it; that way you’ll know it’s working before you actually rely on it to lock the door behind you.

把内盖放回锁上，您就可以开始了！ 正式使用前，请务必先进行测试； 这样一来，您在真正依靠它锁定身后的门之前，便会知道它正在工作。

翻译自: https://www.howtogeek.com/321955/how-to-enable-auto-lock-for-your-kwikset-kevo-smart-lock/