如何将GameCube控制器连接到Nintendo Switch

seeshooteatrepeat/Shutterstock seeshooteatrepeat / Shutterstock

If you want the nostalgic feel of the classic GameCube controller, you can use an old GameCube controller in place of the Nintendo Switch’s Joy-Cons. It’s the perfect accessory for Super Smash Bros. Ultimate Edition, but you can use them in just about any game.

如果您想要经典GameCube控制器的怀旧感觉，可以使用旧的GameCube控制器代替Nintendo Switch的Joy-Cons。 它是Super Smash Bros. Ultimate Edition的完美配件，但您几乎可以在任何游戏中使用它们。

更新Nintendo开关 (Update the Nintendo Switch)

The GameCube controller is supported on Nintendo Switch consoles running at least system version 5.0.0, released in March 2018.

至少运行于2018年3月发布的系统版本5.0.0的Nintendo Switch控制台支持GameCube控制器。

To ensure that your Nintendo Switch is up to date with the latest system version, double-check that your system is connected to Wi-Fi, and navigate to “System Settings” from the Home menu.

为确保您的Nintendo Switch使用最新的系统版本，请再次检查您的系统是否已连接到Wi-Fi，然后从主菜单导航至“系统设置”。

Once you’re in System Settings, navigate to “System”, and your current version will be listed under “System Update” to the right.

进入“系统设置”后，导航至“系统”，当前版本将在右侧的“系统更新”下列出。

GameCube控制器和Nintendo开关 (GameCube Controllers and the Nintendo Switch)

In autumn 2017, when Nintendo released the 5.0 software update for the Nintendo Switch, the company quietly included a new feature: the ability to use old GameCube controllers with the Nintendo Switch system.

在2017年秋天，当任天堂发布Nintendo Switch的5.0软件更新时 ，该公司悄悄地包含了一项新功能：能够在Nintendo Switch系统中使用旧的GameCube控制器。

You can connect your old GameCube controller through a Wii U GameCube Controller adapter like Nintendo’s official GameCube Controller Adapter. The official GameCube Controller adapter costs around $20 at retail.

您可以通过Wii U GameCube控制器适配器(如Nintendo的官方GameCube控制器适配器)连接旧的GameCube控制器。 官方的GameCube Controller适配器零售价约为20美元。

Place the Nintendo Switch console in TV mode, and connect both of the USB plugs from the GameCube Controller Adapter to the Nintendo Switch dock.

将Nintendo Switch控制台置于电视模式，然后将两个USB插头从GameCube控制器适配器连接到Nintendo Switch底座。

Nintendo 任天堂

On the Nintendo Switch model, there are two USB ports on the side of the Nintendo Switch dock where you’ll connect the GameCube Controller adapter.

在Nintendo Switch型号上，Nintendo Switch底座的侧面有两个USB端口，您可以在其中连接GameCube Controller适配器。

Nintendo 任天堂

After you’ve connected the Gamecube Controller adapter to the USB ports, just connect your GameCube controller to the adapter and press a button on the GameCube controller with the Nintendo Switch turned on.

将Gamecube控制器适配器连接到USB端口后，只需将GameCube控制器连接到适配器，然后在Nintendo Switch打开的情况下按GameCube控制器上的按钮。

On the Nintendo Switch console, navigate to the “Controller Settings” menu on the Home screen, using your Nintendo Switch controllers.

在Nintendo Switch控制台上，使用您的Nintendo Switch控制器导航到主屏幕上的“控制器设置”菜单。

Under the “Controllers” menu, select “Pairing New Controllers,” and the Nintendo Switch will begin searching for a compatible Nintendo Switch controller.

在“控制器”菜单下，选择“配对新控制器”，然后Nintendo Switch将开始搜索兼容的Nintendo Switch控制器。

You’ll be prompted to select the L and R Trigger buttons on the GameCube controller, just like you would normally do with the Nintendo Switch Joy-Cons, and that’s all there is to it.

系统将提示您选择GameCube控制器上的L和R触发按钮，就像通常使用Nintendo Switch Joy-Cons一样，仅此而已。

The Nintendo Switch “Controllers” menu will show a preview of the attached USB controller.

Nintendo Switch的“控制器”菜单将显示连接的USB控制器的预览。

GameCube控制器和Nintendo Switch Lite (GameCube Controllers and the Nintendo Switch Lite)

You can also use a GameCube controller with the Nintendo Switch Lite, but it gets a little complicated. The Nintendo Switch Lite does not have a docking system, so an additional cable is required.

您还可以将GameCube控制器与Nintendo Switch Lite一起使用，但是有点复杂。 Nintendo Switch Lite没有对接系统，因此需要额外的电缆。

You’ll need a GameCube controller, a Wii U adapter, the black cable USB cable included with the Wii U adapter, and a USB C to USB 3 adapter.

您将需要一个GameCube控制器，一个Wii U适配器 ， Wii U适配器随附的黑色电缆USB电缆以及一个USB C转USB 3适配器 。

This will let you plug into the Switch Lite’s single USB-C port and connect your wired controller to the device. As covered above, you’ll need to configure the GameCube controller through the “Controller” menu.

这样，您就可以插入Switch Lite的单个USB-C端口并将有线控制器连接到设备。 如上所述，您需要通过“控制器”菜单配置GameCube控制器。

Compared to using the Nintendo Switch in docked mode, the Nintendo Switch Lite does not connect to a TV display, so you may want to find an alternative method to prop the device up while you play. Of course, you could always just lay it flat on the floor. We won’t judge you.

与在停靠模式下使用Nintendo Switch相比，Nintendo Switch Lite不会连接到电视显示器，因此您可能想找到一种替代方法来在播放时支撑设备。 当然，您始终可以将其平放在地板上。 我们不会审判你。

翻译自: https://www.howtogeek.com/663320/how-to-connect-gamecube-controllers-to-the-nintendo-switch/