如何将Kwikset Kevo恢复出厂设置

If you’re planning on selling your Kwikset Kevo, or just moving to another house and don’t plan to take it along with you, here’s how to factory reset it so your digital keys are completely erased from it.

如果您打算出售自己的Kwikset Kevo，或者只是打算搬到另一所房子而又不打算随身携带，则可以通过以下方法将其恢复出厂设置，以便完全删除其中的数字键。

Unfortunately, the process isn’t as obvious as Kwikset could have made it, since none of the buttons on the lock say “reset”, and there’s no way to reset the lock from the app. Luckily, we’re here to help (and it literally just takes 10 seconds).

不幸的是，该过程并不像Kwikset那样明显，因为锁上的任何按钮都没有说“重置”，并且无法从应用程序重置锁。 幸运的是，我们在这里为您提供帮助(实际上只需要10秒钟)。

Start by removing the black assembly cover by pushing it upward and sliding it out.

首先将黑色组合件的顶盖向上推并滑出，以将其卸下。

Locate the small button labeled “A”. It will be near the top-left corner of the lock.

找到标有“ A”的小按钮。 它将在锁的左上角附近。

Press and hold this button for about ten seconds until you hear the lock beep and the lights on the outside portion of the lock flash red.

按住此按钮约十秒钟，直到听到锁定蜂鸣声，并且锁定外部的指示灯呈红色闪烁。

Once this happens, release the button and you’ll be good to go! The Kevo is now ready for its new owner. Again, this will completely erase all of your current digital keys, as well as any fobs that you have connected to it. So make sure that you reset the lock after you’re positive that you won’t use it anymore.

一旦发生这种情况，松开按钮，您就可以开始使用了！ Kevo现在已准备好为其新所有者提供服务。 同样，这将完全擦除您当前使用的所有数字钥匙以及与之连接的所有密钥卡。 因此，请确保在确定不再使用锁之后将其重置。

翻译自: https://www.howtogeek.com/330163/how-to-factory-reset-the-kwikset-kevo/