离开家时如何自动锁定Schlage Connect-CSDN博客

本文介绍如何为SchlageConnect智能锁设置自动锁定功能，以防出门时忘记锁门。自动锁定可在锁闩解锁后30秒自动锁上，确保安全性。文章提供了两种设置方法：直接在锁上设置或通过智能手机应用进行配置。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

If your forgetfulness applies to locking your front door, you can have the Schlage Connect smart lock automatically lock behind you. So if you forget to lock it, you won’t have to worry about it in the first place.

如果您忘记锁前门，可以将Schlage Connect智能锁自动锁在您身后。因此，如果您忘记锁定它，则不必首先担心它。

Auto-lock works by automatically extending the deadbolt 30 seconds after its unlocked, which gives you plenty of time to open the door, leave, then close the door behind you before it locks. If this is a feature you want to enable, there are two ways to do it.

自动锁的工作原理是，在锁闩解锁后30秒钟自动延长锁舌，从而使您有足够的时间打开门，离开门，然后在锁紧之前将门关上。如果要启用此功能，则有两种方法可以启用它。

自己上锁 (On the Lock Itself)

To get started, open your door and extend the deadbolt so that it’s in the locked position. From there, press the Schlage button at the top of the keypad and enter in your six-digit programming code.

首先，请打开门并拉出固定栓，使其处于锁定位置。从那里，按键盘顶部的Schlage按钮，然后输入六位数的编程代码。

Once the programming code is entered, hit “9” on the keypad. You’ll get one beep and one blink of the green checkmark. If you’re disabling it, you’ll get two of each instead.

输入编程代码后，按键盘上的“ 9”。您会听到一声哔哔声，并且绿色复选标记会闪烁一声。如果禁用它，则每个将获得两个。

That’s it! It’s pretty simple to do, but you can also just do it from your phone, which is perhaps even easier.

而已！这很简单，但是您也可以从手机上进行，这可能甚至更容易。

通过电话 (From Your Phone)

To enable auto-lock from your phone (and not having to mess with your lock in the first place), you’ll first need to connect the smart lock to a smarthome hub, if it isn’t already (I’m using the Wink Hub 2 along with the Wink app). Check out our setup guide on how to do this. You can use a different hub, and it should follow a somewhat similar process.

要启用手机自动锁定功能(并且不必首先弄乱您的锁)，首先需要将智能锁连接到智能家居集线器(如果尚未安装的话)(我正在使用Wink Hub 2以及Wink应用程序)。查看我们的设置指南，了解如何执行此操作。您可以使用其他集线器，并且集线器应遵循类似的过程。

Select your lock in the app and then tap on the settings gear icon in the top-right corner of the screen.

在应用程序中选择您的锁，然后点击屏幕右上角的设置齿轮图标。

When the pop-out menu appears, tap on “Front Door” under “Locks”. Keep in mind that your lock might be named something different other than “Front Door”.

当弹出菜单出现时，点击“锁”下的“前门”。请记住，锁的名称可能不同于“前门”。