会话固定修复方法_如何使用断裂的固定夹修复以太网电缆？

会话固定修复方法

Anyone who has dealt with Ethernet cables knows what it is like when a locking clip breaks and the cable constantly pops loose afterwards. Is there an easy DIY way to fix the cable, or is it simply better to replace it?

任何处理过以太网电缆的人都知道，当固定夹断裂并且电缆随后不断松动时，会是什么样子。 是否有一种简单的DIY方式来固定电缆，还是只需要更换电缆就更好了？

Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites.

今天的“问答”环节由SuperUser提供，它是Stack Exchange的一个分支，该社区是由社区驱动的Q＆A网站分组。

Photo courtesy of tlsmith1000.

照片由tlsmith1000提供 。

问题 (The Question)

SuperUser reader T… wants to know how to repair an Ethernet cable with a broken locking clip:

超级用户阅读器T…想知道如何用断裂的固定夹修理以太网电缆：

I have a 10 meter long Ethernet cable. One plug has the little locking clip missing, just like the part outlined in the red ellipse in the following picture.

我有一条10米长的以太网电缆。 一个插头缺少一点锁定夹，就像下图中红色椭圆所示的部分。

How can I fix it? Is this something I should even attempt to fix myself, or is it better to replace the cable?

我该如何解决？ 这是我什至应该尝试修复的事情，还是更换电缆更好？

Is there an easy DIY fix that T… can employ, or should the cable be replaced with a new one instead?

T…是否可以使用一种简单的DIY修复方法，还是应该用新电缆代替电缆？

答案 (The Answer)

SuperUser contributors GrossT and user55325 have the answer for us. First up, GrossT:

超级用户贡献者GrossT和user55325为我们提供了答案。 首先，GrossT：

If you don’t want to replace the cable or install a new jack, you have a few options:

如果您不想更换电缆或安装新的插Kong，则有几种选择：

1. Glue it into a coupler or a short extension like the ones shown below (with the coupler you will need another short run of cable on the other side):

1.将其粘合到耦合器或如下所示的短扩展中(使用耦合器，另一端需要另一根短电缆)：

2. Repair it with a zip tie. Use this guide for instructions: http://www.instructables.com/id/Repair-a-Broken-Ethernet-Plug/

2.用扎带修理。 使用此指南获取说明： http : //www.instructables.com/id/Repair-a-Broken-Ethernet-Plug/

Followed by the answer from user55325:

紧接着来自user55325的答案：

It’s entirely possible to cut off the plug and install a new one, but you will need a crimping tool. It’s about $15. The thing is, your local store will probably charge you more than $15 for a cable – even if you buy it online, it’ll probably be close to that when you take shipping into account. Therefore, it’s cost-effective in my opinion, even if you only need it occasionally (and those pieces tend to break somewhat frequently, in my experience).

完全有可能切断插头并安装新的插头，但是您将需要压接工具 。 大约15美元。 关键是，您当地的商店可能会向您收取15美元以上的电缆费用-即使您在线购买，考虑到运输费用，也可能与之接近。 因此，在我看来，即使您只是偶尔需要它，它还是具有成本效益的(根据我的经验，这些部分往往会经常出现故障)。

Also, if you ever need to run large amounts of cable, it’s much cheaper to buy it in bulk and cut it yourself.

另外，如果您需要使用大量电缆，则散装购买并自行切割会便宜得多。

Don’t forget to match the plug type to the wire type – stranded or solid (in your case, the wire is almost certainly stranded).

别忘了将插头类型与电线类型相匹配–绞合或实心(在您的情况下，电线几乎肯定是绞合的)。

As you can see, there is more than one way to repair a cable if you are up to tackling a quick bit of DIY work. Interested in more repair options? Then make sure to read through all the replies left on the discussion thread linked below!

如您所见，如果您打算快速完成DIY工作，则有多种方法可以修复电缆。 有兴趣提供更多维修选择吗？ 然后，请确保通读下面链接的讨论主题上留下的所有答复！

---

---

Have something to add to the explanation? Sound off in the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.

有什么补充说明吗？ 在评论中听起来不错。 是否想从其他精通Stack Exchange的用户那里获得更多答案？ 在此处查看完整的讨论线程 。

翻译自: https://www.howtogeek.com/181866/how-do-you-repair-an-ethernet-cable-with-a-broken-locking-clip/

会话固定修复方法