网件 设置为ap_如何为Netgear Arlo Pro相机系统编辑或创建自定义模式

网件 设置为ap

By default, Netgear’s Arlo Pro camera system comes with several different modes that you can switch between, depending on whether you’re home or away. However, you may want to customize the settings for different modes. Here’s how to create your own modes in the Arlo app.

默认情况下，Netgear的Arlo Pro相机系统具有几种不同的模式，您可以根据自己的出门在外或在这两种模式之间进行切换。 但是，您可能需要自定义不同模式的设置。 这是在Arlo应用程序中创建自己的模式的方法。

There are four default modes available: Armed, Disarmed, Schedule, and Geofencing. Unfortunately, none of these modes allow the camera to record motion without receiving alerts all the time. You can edit the default modes to do this, but you may want the ability to easily switch back and forth between receiving alerts and not receiving them. This is where creating your own custom mode comes in handy.

有四种默认模式可用：布防，撤防，计划和地理围栏。 不幸的是，所有这些模式都不允许摄像机记录运动而始终没有收到警报。 您可以编辑默认模式来执行此操作，但是您可能希望能够轻松地在接收警报和不接收警报之间来回切换。 在这里，可以轻松创建自己的自定义模式。

To start, open up the Arlo app and tap on the “Mode” tab at the bottom.

首先，打开Arlo应用程序，然后点击底部的“模式”选项卡。

Select your Arlo base station under “My Devices”.

在“我的设备”下选择您的Arlo基站。

From here, you can tap the pencil to edit an existing mode, or tap on “Add a Mode” to create a new one. We’re going to create a new one for this tutorial.

在这里，您可以点击铅笔以编辑现有模式，或点击“添加模式”以创建新的模式。 我们将为本教程创建一个新的。

Type in a name for your new mode and then hit “Next” in the top-right corner of the screen.

输入新模式的名称，然后点击屏幕右上角的“下一步”。

Next, select the camera(s) that you want to include with this new mode and hit “Next”.

接下来，选择要包含在此新模式下的摄像机，然后单击“下一步”。

On the next screen, select how you want the camera(s) to activate, either selecting “When motion is detected” or “When audio is detected”. You can also select both.

在下一个屏幕上，选择“当检测到运动时”或“当检测到音频时”激活相机的方式。 您也可以同时选择两者。

Next, adjust the motion sensitivity using the slider and hit “Next” when you’re done.

接下来，使用滑块调整运动灵敏度，然后单击“下一步”。

Hit “Next” again.

再次点击“下一步”。

On the next screen, select what you want the camera(s) to do, as well as whether or not you want the siren to sound. Hit “Next”.

在下一个屏幕上，选择您想要照相机执行的操作，以及是否要发出警报声。 点击“下一步”。

Next, select how long you want the camera(s) to record, either recording until the motion stops or recording for a fixed amount of time. Hit “Next”.

接下来，选择您希望摄像机记录多长时间，要么记录直到运动停止，要么记录固定的时间。 点击“下一步”。

Select how you want to receive alerts, either through push notifications or email (or both). You can also choose not to receive alerts at all by de-selecting each option.

选择您希望通过推送通知或电子邮件(或两者)接收警报的方式。 您也可以通过取消选择每个选项来选择根本不接收警报。

The final screen will show an overview of the mode’s settings. Hit “Save” if everything looks good.

最终屏幕将显示该模式设置的概述。 如果一切看起来不错，请单击“保存”。

Your new custom mode will appear at the bottom of the list. Select it to enable it.

您的新自定义模式将出现在列表的底部。 选择它启用它。

From there, you can switch between modes whenever you want, depending on whether you want the cameras to record or not.

从那里，您可以根据需要是否录制摄像机，随时在模式之间切换。

翻译自: https://www.howtogeek.com/309497/how-to-edit-or-create-custom-modes-for-the-netgear-arlo-pro-camera-system/

网件 设置为ap