实验9.IPV6

1. 建立物理连接
   

2. 配置接口自动生成链路本地地址及测试可达性，查看邻居信息
   配置RTA
   [RTA-GigabitEthernet0/0]ipv6 address auto link-local
   配置RTB
   [RTB-GigabitEthernet0/0]ipv6 address auto link-local

查看RTBipv6地址：
display ipv6 interface GigabitEthernet 0/0 brief
*down: administratively down
(s): spoofing
Interface Physical Protocol IPv6 Address
GigabitEthernet0/0 up up FE80::70B0:E3FF:FEC6:105
RTA ping RTB：
ping ipv6 -i GigabitEthernet 0/0 FE80::70B1:FF:FE40:205
Ping6(56 data bytes) FE80::70B0:E3FF:FEC6:105 --> FE80::70B1:FF:FE40:205, press CTRL_C to break
56 bytes from FE80::70B1:FF:FE40:205, icmp_seq=0 hlim=64 time=1.000 ms
56 bytes from FE80::70B1:FF:FE40:205, icmp_seq=1 hlim=64 time=0.000 ms
56 bytes from FE80::70B1:FF:FE40:205, icmp_seq=2 hlim=64 time=0.000 ms
56 bytes from FE80::70B1:FF:FE40:205, icmp_seq=3 hlim=64 time=1.000 ms
56 bytes from FE80::70B1:FF:FE40:205, icmp_seq=4 hlim=64 time=1.000 ms

--- Ping6 statistics for FE80::70B1:FF:FE40:205 ---
RTA查看ipv6邻居：
display ipv6 neighbors all
Type: S-Static D-Dynamic O-Openflow R-Rule I-Invalid
IPv6 address Link layer VID Interface/Link ID State T Age
FE80::70B1:FF:FE40:205 72b1-0040-0205 N/A GE0/0 REACH D 10

1. 配置接口生成全球单播地址并测试可达性
   [RTA-GigabitEthernet0/0]ipv6 address 3001::1/64
   [RTB-GigabitEthernet0/0]ipv6 address 3001::2/64
   ping ipv6 -i GigabitEthernet 0/0 3001::2
   Ping6(56 data bytes) 3001::1 --> 3001::2, press CTRL_C to break
   56 bytes from 3001::2, icmp_seq=0 hlim=64 time=2.000 ms
   56 bytes from 3001::2, icmp_seq=1 hlim=64 time=1.000 ms
   56 bytes from 3001::2, icmp_seq=2 hlim=64 time=1.000 ms
   56 bytes from 3001::2, icmp_seq=3 hlim=64 time=1.000 ms
   56 bytes from 3001::2, icmp_seq=4 hlim=64 time=0.000 ms

--- Ping6 statistics for 3001::2 ---

display ipv6 neighbors all
Type: S-Static D-Dynamic O-Openflow R-Rule I-Invalid
IPv6 address Link layer VID Interface/Link ID State T Age
3001::2 72b1-0040-0205 N/A GE0/0 REACH D 18
FE80::70B1:FF:FE40:205 72b1-0040-0205 N/A GE0/0 REACH D 8

转载于:https://www.cnblogs.com/akiz/p/11144484.html