wl18xx编译的时候出现WARNING: "simple_open" WARNING: "wl12xx_get_platform_data"

 .........................................................................................................................................................................................................

 

Building modules, stage 2.

  MODPOST 7 modules

WARNING: "wl12xx_get_platform_data" [/home/fine-work/linux_debug_pro/driver/fsl/flairmicro/compat_wl18xx/drivers/net/wireless/ti/wlcore/wlcore_sdio.ko] undefined!

WARNING: "simple_open" [/home/fine-work/linux_debug_pro/driver/fsl/flairmicro/compat_wl18xx/drivers/net/wireless/ti/wlcore/wlcore.ko] undefined!

WARNING: "simple_open" [/home/fine-work/linux_debug_pro/driver/fsl/flairmicro/compat_wl18xx/drivers/net/wireless/ti/wl18xx/wl18xx.ko] undefined!

WARNING: "simple_open" [/home/fine-work/linux_debug_pro/driver/fsl/flairmicro/compat_wl18xx/drivers/net/wireless/ti/wl12xx/wl12xx.ko] undefined!

  CC      /home/fine-work/linux_debug_pro/driver/fsl/flairmicro/compat_wl18xx/compat/compat.mod.o

  LD [M]  /home/fine-work/linux_debug_pro/driver/fsl/flairmicro/compat_wl18xx/compat/compat.ko

...........................................................................................................................................................................................................

 

一.WARNING: "simple_open"

 

1. 把 compat-3.4.c compat-3.4.h 这两个文件放到wlcore 文件夹下面

 

2. 在wlcore文件夹下面。修改debugfs.h 在  #include "wlcore.h" 下面添加#include "compat-3.4.h"

 

3. 修改wlcore文件夹下面的makefile  在里面

 

wlcore-objs = main.o cmd.o io.o event.o tx.o rx.o ps.o acx.o \

  boot.o init.o debugfs.o scan.o 

 

后面添加  compat-3.4.o 

 

 wlcore-objs = main.o cmd.o io.o event.o tx.o rx.o ps.o acx.o \

  boot.o init.o debugfs.o scan.o  compat-3.4.o 

 

二：WARNING: "wl12xx_get_platform_data" 

 

定义 CONFIG_WL12XX_PLATFORM_DATA

 

 

 

 

转载于:https://www.cnblogs.com/ioio/p/4414149.html