学点TCPDUMP

[root@future ~]# yum install tcpdump

官网地址：

https://nmap.org/

还有中文手册，太感动了

https://nmap.org/man/zh/man-port-scanning-basics.html

 

1.直接输入tcpdump

输出大量信息，按ctrl+c终止，每一行都是一个数据包

680 packets captured
682 packets received by filter
0 packets dropped by kernel

2.只抓去10个包

[root@future ~]# tcpdump -c 10
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
06:42:40.818075 IP 192.168.247.130.ssh > 192.168.247.1.36946: Flags [P.], seq 3575934398:3575934594, ack 1866571419, win 280, length 196
06:42:40.818885 IP 192.168.247.130.46267 > 192.168.247.2.domain: 58461+ PTR? 1.247.168.192.in-addr.arpa. (44)
06:42:40.855105 ARP, Request who-has 192.168.247.130 tell 192.168.247.2, length 46
06:42:40.855120 ARP, Reply 192.168.247.130 is-at 00:0c:29:76:1d:45 (oui Unknown), length 28
06:42:40.855187 IP 192.168.247.2.domain > 192.168.247.130.46267: 58461 NXDomain 0/0/0 (44)
06:42:40.855426 IP 192.168.247.130.35720 > 192.168.247.2.domain: 25496+ PTR? 130.247.168.192.in-addr.arpa. (46)
06:42:40.877511 IP 192.168.247.1.36946 > 192.168.247.130.ssh: Flags [.], ack 196, win 254, length 0
06:42:40.888226 IP 192.168.247.2.domain > 192.168.247.130.35720: 25496 NXDomain 0/0/0 (46)
06:42:40.888506 IP 192.168.247.130.41563 > 192.168.247.2.domain: 11803+ PTR? 2.247.168.192.in-addr.arpa. (44)
06:42:40.896265 IP 192.168.247.130.ssh > 192.168.247.1.36946: Flags [P.], seq 196:376, ack 1, win 280, length 180
10 packets captured
11 packets received by filter
0 packets dropped by kernel

View Code

抓去的包默认不回保存，我们可以加-w参数保存

[root@future ~]# tcpdump -c 10 -w dumps.log
tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
10 packets captured
10 packets received by filter
0 packets dropped by kernel

保存下来的数据不能直接查看，使用-r参数

[root@future ~]# tcpdump -r dumps.log 

3.显示系统有那些网络设备

[root@future ~]# tcpdump -D
1.eth0
2.nflog (Linux netfilter log (NFLOG) interface)
3.nfqueue (Linux netfilter queue (NFQUEUE) interface)
4.usbmon1 (USB bus number 1)
5.usbmon2 (USB bus number 2)
6.any (Pseudo-device that captures on all interfaces)
7.lo

4.指定网卡监听

[root@future ~]# tcpdump -i eth0

5.显示更为详细的信息，比如分片

[root@future ~]# tcpdump -v
或者
[root@future ~]# tcpdump -vv

6.不要将IP地址反解为主机名

[root@future ~]# tcpdump -n

7.只抓去udp包

[root@future ~]# tcpdump udp

8.只抓取ICMP包

[root@future ~]# tcpdump icmp

9.只抓取某个具体端口流量

[root@future ~]# tcpdump port 22

10.指定端口范围

[root@future ~]# tcpdump portrange 1-1024

11.指定源端口或者目标端口
源端口：

[root@future ~]# tcpdump src port 80

目标端口：

[root@future ~]# tcpdump dst port 80

12.抓去包含指定主机名的流量包

[root@future ~]# tcpdump host www.baidu.com

13.抓去大于1000子节的流量

[root@future ~]# tcpdump greater 1000

小于1000字节的流量包

[root@future ~]# tcpdump less 1000

14.查看数据包内容

[root@future ~]# tcpdump -A

以ASCII码形式显示，内容不一定可以查看。

15.两种形式查看数据包内容

[root@future ~]# tcpdump -X

二进制和ASCII显示

16.抓去来自某个IP的数据包

[root@future ~]# tcpdump src 192.168.247.1

抓取目标是某个IP的数据包

[root@future ~]# tcpdump dst 192.168.247.1

17.使用逻辑关键字

[root@future ~]# tcpdump tcp and src 192.168.247.1

[root@future ~]# tcpdump tcp and src 192.168.247.1 and port 1000

[root@future ~]# tcpdump src 192.168.247.1 or  src 192.168.247.2

[root@future ~]# tcpdump not port 80

[root@future ~]# tcpdump tcp and src 192.168.247.1 and not port 80

 

 

转载于:https://www.cnblogs.com/XYJK1002/p/5351089.html