VMware Tools安装手记

打开终端。切换为超级用户(SuperUser)。(在Ubuntu中输入"sudo -i",在Ubuntu以外的其它发行版中输入"su")。输入根用户密码。 
 
----------------------------------------------------------------------------------------------------------
为什么要装 VMware Tools?

因为它可以改善 Virtual Machine 的运行性能,而且可以让 Host OS 和 Guest OS 互通有无,这样我们就不用伤脑筋,要架设什么 服务器,来沟通两个 OS,现在就让我们开始吧!

VMware Tools所在位置:VMware 安装路径 /VMware/VMware Workstation/linux.iso

[root@rd01 ~]# mount /cdrom     
# 有时可能加载不了,这时就要先将 系统关闭,再手动指定 ISO 映像,看下图
[root@rd01 ~]# cd /cdrom
[root@rd01 ~]# ls -a
[root@rd01 ~]# cp VMwareTools-5.5.1-19175.tar.gz /tmp
[root@rd01 ~]# cd /tmp
[root@rd01 ~]# tar zxpf VMwareTools-5.5.1-19175.tar.gz
[root@rd01 ~]# cd vmware-tools-distrib
[root@rd01 vmware-tools-distrib]# ./vmware-install.pl
Creating a new installer database using the tar3 format.

Installing the content of the package.

# 安装过程的画面,全部使用默认值,一直按 Enter 就对了

In which directory do you want to install the binary files?
[/usr/bin]

What is the directory that contains the init directories (rc0.d/ to rc6.d/)?

[/etc/rc.d]

What is the directory that contains the init scripts?
[/etc/rc.d/init.d]

In which directory do you want to install the daemon files?
[/usr/sbin]

In which directory do you want to install the library files?
[/usr/lib/vmware-tools]

Thepath "/usr/lib/vmware-tools" does not exist currently. This program isgoingto create it, including needed parent directories. Is this whatyou want?
[yes]

In which directory do you want to install the documentation files?
[/usr/share/doc/vmware-tools]

Thepath "/usr/share/doc/vmware-tools" does not exist currently. Thisprogram isgoing to create it, including needed parent directories. Isthis what you want?
[yes]

The installation of VMware Tools 5.5.1 build-19175 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl".

Before running VMware Tools for the first time, you need to configure it by
invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want
this program to invoke the command for you now? [yes]


Stopping VMware Tools services in the virtual machine:
   Guest operating system daemon:                          [   确定  ]
Trying to find a suitable vmhgfs module for your running kernel.

The module bld-2.6.9-5.EL-i686-RHEL4 loads perfectly in the running kernel.

pcnet32                30153  0
Unloading pcnet32 module

Trying to find a suitable vmxnet module for your running kernel.

The module bld-2.6.9-5.EL-i686-RHEL4 loads perfectly in the running kernel.



Detected X.org version 6.8.

关闭控制台鼠标服务:                                       [   确定  ]
启动控制台鼠标服务:                                       [   确定  ]

Please choose one of the following display sizes (1 - 13):

# 显示分辨率,这里是以 1024x768 为例

# VMware Tools 安装的时候,会自动修改 X server 的配置 文件

[1]  "640x480"
[2]< "800x600"
[3]  "1024x768"
[4]  "1152x864"
[5]  "1280x800"
[6]  "1152x900"
[7]  "1280x1024"
[8]  "1376x1032"
[9]  "1400x1050"
[10]  "1680x1050"
[11]  "1600x1200"
[12]  "1920x1200"
[13]  "2364x1773"
Please enter a number between 1 and 13:

[2] 3


X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.9-34.EL i686 [ELF]
Current Operating System: Linux rd01.domain 2.6.9-34.EL #1 Wed Mar 8 00:07:35 CST 2006 i686
Build Date: 04 May 2006
Build Host: x8664-build.centos.org

        Before reporting problems, check http://wiki.X.Org
        to make sure that you have the latest version.
Module Loader present
OSKernel: Linux version 2.6.9-34.EL (buildcentos@build-i386) (gcc version3.4.5 20051201 ( Red Hat 3.4.5-2)) #1 Wed Mar 8 00:07:35 CST 2006 P
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) Log file: "/tmp/vmware-config0/XF86ConfigLog.3131", Time: Mon Jun 12 20:57:34 2006
(++) Using config file: "/tmp/vmware-config0/XF86Config.3131"
(WW) VMWARE(0): Failed to set up write-combining range (0xf0000000,0x1000000)

X is running fine with the new config file.

Starting VMware Tools services in the virtual machine:
   Switching to guest configuration:                       [   确定  ]
   Guest filesystem driver:                                [   确定  ]
   DMA setup:                                              [   确定 ]
   Guest operating system daemon:                          [   确定  ]

The configuration of VMware Tools 5.5.1 build-19175 for Linux for this running
kernel completed successfully.

You must restart your X session before any mouse or graphics changes take
effect.

You can now run VMware Tools by invoking the following command:
"/usr/bin/vmware-toolbox" during an XFree86 session.

To use the vmxnet driver, restart networking using the following commands:
/etc/init.d/network stop
rmmod pcnet32
rmmod vmxnet
depmod -a
modprobe vmxnet
/etc/init.d/network start

Enjoy,

--the VMware team

[root@rd01 vmware-tools-distrib]# shutdown -r now

# 修改完成之后,重新启动 计算机,让 VMware Tools 生效



# 重新启动计算机之后,我们就会发觉到,当我们要离开 Guest OS 的时候,不再需要按 Ctrl + Alt 了,

# 现在我们来共享 Host OS 的文件夹给 Guest 使用,〔VM〕→〔设置 Ctrl + D〕

# 注:左下角原本都会显示「You do not have VMware Tools installed」,现在我们装了 VMware Tools,就不再显示了













# 这就是共享完毕的画面,然后我们就需要到 Guest OS 内,看看可不可以读取到刚刚共享的目录

# 顺利的话,我们只要到「/mnt/hgfs」文件夹,就可以看到刚刚共享的文件夹了

<script type=text/javascript> </script> <script src="http://pagead2.googlesyndication.com/pagead/show_ads.js" type=text/javascript></script> <script> window.google_render_ad(); </script>
  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
目标检测(Object Detection)是计算机视觉领域的一个核心问题,其主要任务是找出图像中所有感兴趣的目标(物体),并确定它们的类别和位置。以下是对目标检测的详细阐述: 一、基本概念 目标检测的任务是解决“在哪里?是什么?”的问题,即定位出图像中目标的位置并识别出目标的类别。由于各类物体具有不同的外观、形状和姿态,加上成像时光照、遮挡等因素的干扰,目标检测一直是计算机视觉领域最具挑战性的任务之一。 二、核心问题 目标检测涉及以下几个核心问题: 分类问题:判断图像中的目标属于哪个类别。 定位问题:确定目标在图像中的具体位置。 大小问题:目标可能具有不同的大小。 形状问题:目标可能具有不同的形状。 三、算法分类 基于深度学习的目标检测算法主要分为两大类: Two-stage算法:先进行区域生成(Region Proposal),生成有可能包含待检物体的预选框(Region Proposal),再通过卷积神经网络进行样本分类。常见的Two-stage算法包括R-CNN、Fast R-CNN、Faster R-CNN等。 One-stage算法:不用生成区域提议,直接在网络中提取特征来预测物体分类和位置。常见的One-stage算法包括YOLO系列(YOLOv1、YOLOv2、YOLOv3、YOLOv4、YOLOv5等)、SSD和RetinaNet等。 四、算法原理 以YOLO系列为例,YOLO将目标检测视为回归问题,将输入图像一次性划分为多个区域,直接在输出层预测边界框和类别概率。YOLO采用卷积网络来提取特征,使用全连接层来得到预测值。其网络结构通常包含多个卷积层和全连接层,通过卷积层提取图像特征,通过全连接层输出预测结果。 五、应用领域 目标检测技术已经广泛应用于各个领域,为人们的生活带来了极大的便利。以下是一些主要的应用领域: 安全监控:在商场、银行
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值